Used Lever Shear for sale (2,758)

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Nwjdpsf Nwvfjfx Aqveg

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Nedpfx Aqer R Auzjvjwg Assortment of tools is included in the price

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Nwjdpfx Aqor D Tnwjveg Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm cutting length limitation knife sharpened Weight: 6,800 kg

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened operation manual Nwjdjqmvlrjpfx Aqvsg Weight: approx. 1400 kg

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Nwodpst Exprofx Aqvog Support table on punching side Assortment of tools is included in the price

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Nwsdpfx Astmyifsqvsg Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition Nwjdpfx Aqsq D E Tcovsg

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Nedpfx Aem T Amusqvswg Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,250 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. Njdpfx Aod Exv Heqvswg APPLICATION AREAS • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm plate thickness max. 3 mm cutting angle 1,5 ° side stop electrical adjustable 0 - 1010 mm rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails Nwsdpstqql Iefx Aqvsg

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW Nwodoq A I Upspfx Aqvsg - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch Nwjdpfx Aorzfh Hjqveg - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, The machine is in good technical condition; inspection possible by arrangement. Weight: 11,560 kg Cutting length: max. 4,050 mm Cutting thickness: max. 6.3 mm Njdpfoy Ufa Ejx Aqvewg

Condition: used, Year of construction: 2008, total length: 4,900 mm, total width: 2,400 mm, total height: 1,750 mm, Colour: White Weight: 9.500 kg Price: On request - Year: 2008 Njdpoy Tnzvjfx Aqvowg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 14418 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4060 - Cutting speed [mm/min]: 12 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 4900mm x 2400mm x 1750mm (l x w x h) - Transport weight [kg]: 9500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Nsdpfxey S D Nmj Aqvewg Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, total length: 6,400 mm, Colour: White Weight: 17.500 kg - Documentation available: Yes Nsdpfx Aqoy Thpgsvowg - CE certificate present: No - Serial number: 13707 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Angle adjustment: Motorized - Options: Digital readout - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Nwodpfxeqlaifo Aqveg Punches e.g. 30 mm holes in 10 mm steel Shears 300 mm to 12 mm steel on the flat steel shear

Condition: excellent (used), Maximum cutting length: 2040 mm Maximum sheet thickness: 2 mm steel Njdeduw Ekspfx Aqvewg Weight: approx. 1100 kg

Year of construction: 2024, condition: new, *image similar* Technical data sheet length: 2.050 mm sheet thickness : 3 mm Total power requirement : 3 kW Njdpfx Aqshk Ngcovowg Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Year of construction: 2024, condition: new, Make: DURMA Type: MS 3004 Year of construction: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment EZM9910 control unit Backgauge range 750 mm programmable via control unit Plastic inserts for hold-down device 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop switch Spring flap stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180 The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request. Nwodpfod R Emfox Aqvsg

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm width: 1350mm length: 3100mm Nsdjhk Nf Ropfx Aqvjwg Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm Nedpfx Ajhk Nfueqvewg stand width - table width: 400 mm working height: 850 mm Control: conventional

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Nwsdpfx Ajd R Er Deqvog Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Nwjdexyq Icspfx Aqvjg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: NC control, working width: 3,200 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Motorized Guillotine Shear Make: Schröder Model: MHSU V 3200 x 3.0 Year: 2007 Technical Data Manufacturer: Schröder Model: MHSU V 3200 x 3.0 Year of manufacture: 2007 Working length: 3200 mm Sheet thickness: 3.0 mm Strokes per minute: 34 (continuous mode only) Drive power: 9 kVA Dimensions: L 4.0 x W 1.9 (plus support arms 0.6m) x H 1.5 m Weight: 3300 kg Nwedpfxjy R Na Uo Aqvsg Equipment - POS 100 control system with 9-fold program memory - Pneumatically controlled sheet support device - Linear front guide for movable T-slot consoles - 2 movable support arms on linear guide - Right-hand extended back gauge with T-slot and scale (currently dismantled) - Hold-down device with hard rubber strip to protect polished sheets - Rear area safeguarding via light barrier - Selector switch for single and continuous stroke - Foot switch All information provided without guarantee. A demonstration is possible at any time in our showroom.