Used Libra for sale (993)

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Lsdpfox A Dfmex Aanjak

Condition: like new (used), functionality: fully functional, Year of construction: 2023, 2 x Steel modular Delta I-V side forms L=30m – 75.000 euro/piece Delta beams: Max length: 30m Max width: 640 (with the possibility to make 620/600/580) Max Height: 125cm (minimum 106cm) Slope: 3% Height 150 in the center and 160 at the start/end 1 x Self reacting prestressing bed 75m x 1,25m. – 175.000 euro Lodpfxox Dbzho Aansak PRESTRESS BEDS Dimensions: 75m x 1.25m The complete prestressing installation consists of the following elements: the bed, an active stressing head, a passive stressing head, steel end blocks and a set of 2 cylinders 300 Ton optional extended with a hydraulic pump. Useful length of the beds: 75m Width of the beds: 1250 Capacity of beds: 1600T THE ACTIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T THE PASSIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T HYDRAULIC CYLINDERS 2 cylinders x 300T Rings foreseen for blocking during loading. Steel calibrator blocks: Dimensions: 1m25 x 0m50 Capacity: 600T Number of holes: 168

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,000 mm, Used Mahr 828 length measuring machine incl. accessories – immediately available We are offering a very well-maintained used measuring machine from the brand Mahr, type 828 (direct measuring path 0–200 mm, travel 1000 mm), including comprehensive accessories and a PC software package for the calibration of dial gauges, limit plug gauge sets, rings, etc. Lajdpfx Aajxvb Hhjnjk Operation & condition: The machine is in ready-to-operate condition, has been regularly used and maintained. Inspection and demonstration can be arranged by appointment if interested.

Condition: excellent (used), functionality: fully functional, Motor power 11 kW First calibration unit with steel roller Second unit with rubber roller Belt cleaning blow-off Working width 1100 mm Two feed speeds for sanding belts Stepless adjustable conveyor feed Electric table height adjustment Lsdpsx Ev Afefx Aanjak Shoe with adjustable activation time Brush at workpiece outlet Pneumatic oscillation

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. Ledpfx Aoxm Rq Reanoak • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_16, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Laedpfx Asx Atwlsanok Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, total height: 60,000 mm, input current: 250 A, compressed air connection: 6.2 bar, input voltage: 380 V, warranty duration: 24 months, Equipment: documentation/manual, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw Ledpsw U Ugmofx Aanoak 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Lsdpfx Aasxzuiaonjak

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Ljdpfxex A A Duo Aanoak Main motor power Hp 10 Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Lajdpfew I Hzpjx Aanok Loading by forklift possible. Assistance with transport organization available.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Costa K6 CCC 1350 wide belt sander Year of manufacture: 2016 Ljdpsukgikefx Aanoak Technical condition: very good Costa K6 CCC 1350 wide-belt sander from 2016 is a robust industrial machine for sanding and calibrating wooden surfaces. Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 It includes a steel calibration roller, a hard rubber roller and a soft rubber roller to ensure precise grinding. Additional features: Cleaning units with a combination brush and air blowing system, short workpiece presses and an air blowing system at all sanding units. Weight: The total weight of the machine is 4,300 kg. The machine is valued for its sanding precision and ability to handle large volumes of material, making it ideal for the woodworking and panel manufacturing industries.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_14, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force Laedpfsx Atwfox Aanok - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw Ledpfx Aasw Ulp Eonsak 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Lasdpfx Aajx A Ur Ronek Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Laodpfsxta H Ijx Aanek Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: new, mileage: 10 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: white, number of seats: 18, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Special Equipment • Exterior LED lights, rear upper • Electrically folding exterior mirrors • Auxiliary heater package 1 (fuel-operated additional heater), programmable, including remote control • Right-side sliding door to load/passenger compartment, electrically operated, with additional electric entry step • Seat package 13: dual passenger seat • Driver's seat, 4-way manual adjustment • Passenger seat with storage compartment under independently folding seat cushions • Tray at passenger seat • Lumbar support for driver's seat • Heated windscreen • Windscreen wipers with rain sensors • Park Pilot system, front and rear, with additional side sensors • Active emergency brake assist (radar-based) • Lane keeping assist with drowsiness alert and high-beam assistant, plus lane keeping and lane change assist • Headlight assist with day/night sensor • Blind spot assistant ± adaptive cruise control • Reversing camera • LED headlamps • Fog lights • Exterior mirrors, electrically adjustable, foldable, and heated • Automatic climate control • Ford audio system with 12-inch multifunction display and Ford SYNC4, incl. Android Auto and Apple CarPlay (App-Connect) • Headlights with static cornering light Standard Equipment • Cornering light integrated into headlamp • Increased front axle load capacity to 1.85 t • Final drive ratio 3.31 • Adaptive cruise control (ACC) with distance regulation • Passenger airbag • Driver airbag • Trailer Stability Program (TSA) • Anti-lock Braking System (ABS) • Electrically adjustable and heated exterior mirrors • On-board computer • Integrated indicator in exterior mirrors • Entry lights • Electronic Brakeforce Distribution (EBD) • Electronic Stability Program (ESP) • Electronic traction control • Hill start assist • Crosswind assist • Digital tachograph • Window in load/passenger compartment: sliding window, 2nd row left • Electric window lifts • Speed limiter set to 100 km/h • 6-speed transmission • Lockable glove box • Body variant: high roof • Air conditioning in load/passenger compartment • Radiator grille with chrome strip • Steering wheel (leather) • Height- and reach-adjustable steering column • My Key (2nd programmable vehicle key) • Wheelbase: 3,750 mm • Extended frame Laodpfxjx Inb Ee Aanok • Spare wheel in running gear • Diesel particulate filter • Low-emission, compliant with Euro 6d emissions standard • Sliding door to load/passenger compartment right • Rear mud flaps • Electric power steering • Seat package 13: driver's seat (4-way adjustable), dual passenger seat, fabric • Daytime running lights • Technology package 9 • Rear integrated entry step • Electric entry step under right sliding door • Lightly tinted heat-insulating glazing • Central locking with remote control • Additional heater (hot water) • Second key with remote control • 2 batteries – battery runtime, programmable to 10 min generator operation • Start-stop system • Digital tachograph: operation subject to legal requirements, calibration (necessary for operation) and operating instructions available at participating Ford dealers for an additional charge • Ford Easy Fuel (comfort fuel tank cap and misfuelling protection) • 70 L fuel tank • High roof (H3) incl. longitudinal luggage shelf in passenger compartment (overhead), standard with L4 wheelbase; headliner in driver’s cab and passenger compartment • Overhead storage compartment, front • Side windows, 2nd row, with left sliding window • Pop-out windows, 4th row, right and left • Electric front windows

Condition: ready for operation (used), Year of construction: 1994, Operating voltage: 380V Frequency: 50Hz Weight: 7500 Current consumption: 172 A Ljdpfx Aaet Dk Sisnjak Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross-grinding: Standard: 5400 x 150 mm Longitudinal grinding: Standard: 1350 x 2620 mm Machine dimensions Working width: 1300 mm

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_1, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Laedpfx Ajx Atuqjanek Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Lajdpfx Aaev Uplajnek Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm Lsdsxn Amaspfx Aanoak total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: good (used), Standard equipment - Basic device profile projector Mitutoyo PJ 3000 - Ground glass D 300 mm with clamp for fastening of a radius template - Objective 10x and reflected light mirror - Measuring table with travel ... Lasdpfxep H Ta Dj Aansk a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Delivery I Instruction I Factory and Daaks calibration possible

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1700 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. Laodpevugrqefx Aansk In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1700mm Max. rotation speed 125 rpm

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1200 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. Lasdpfxovugq Ts Aanek The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1200mm Max. rotation speed 125 rpm

Condition: new, Year of construction: 2025, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. The latest version of the machine with an innovative tabletop opening system: ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Ljdpfswu T S Ajx Aanjak Trouble-free change of the planer to the thicknesser. Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical data: Knife shaft diameter [mm] 75 Knife shaft speed [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 90 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 250x30x3 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Power supply 230V

Condition: new, Year of construction: 2025, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. Laedsvxhznspfx Aanjk The latest version of the machine with an innovative tabletop opening system: ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Trouble-free change of the planer to the thicknesser. Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical data: Knife shaft diameter [mm] 75 Knife shaft revolutions [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 0 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 2500x300x30 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Power supply 400V