Used Libra for sale (944)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. Rcsdpfoxrnkfsx Aabsh 2x filling pipes including 95 mm & 125 mm. Capacity up to 1200 kg / hour.

Condition: used, Year of construction: 1978, Number of belts: 2-belt Maximum working width: 1100 mm Minimum working height: 3 mm Rcsdpfx Asxta H Ioabeh Maximum working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive 2nd unit: kW Cleaning brushes: yes Feed speed: 7 m/min set, 14 m/min set Control: hand control panel Electrical/pneumatic belt oscillation: yes Table lift: electric motor Table display: mechanical numeric display Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction connection diameter: 2 x 200 mm Stock location: Nattheim

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Redpfjxqggcsx Aaboch Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA Rcodpfx Aaoxpvuysbjh - Max. working width: 1100 mm - Max. working height: 170 mm - 2 processing units: - Rubber pressure roller 1) Ribbed metal calibrating roller - Rubber pressure roller 2) Ribbed rubber roller + shoe + metal roller - Rubber pressure roller - Motor power for units I and II: 11 kW From below: - 3 metal sliding rollers - Feed belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for fine adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 8 bar - Extraction port diameter: 2x160 mm, 4x100 mm - Overall dimensions (L/W/H): 2000x1600x2100 mm - Weight: 1170 kg ADVANTAGES – Not repainted – Made in Italy – 2 processing units – DTR technical documentation – Used sander, very good condition Net price: 36,900 PLN Net price: 8,780 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: reconditioned (used), The JUKI MB-1800B is an automatic button sewing machine designed to deliver high speed, precision, and reliability. Manufactured by the Japanese brand JUKI, a benchmark of excellence in industrial sewing machinery, this model meets the needs of workshops, garment factories, and tailoring shops requiring productivity and consistent results. The machine is used but has been fully overhauled by our specialized technicians. Every component has been inspected, cleaned, and tested to ensure performance equal to a new machine. It is reliable, ready for immediate use, and guaranteed to provide long lifespan and impeccable stitch quality. Rcodpfx Aaoxrb Nhobeh Brand / Model: JUKI MB-1800B Type: Automatic button sewing machine Condition: Used – fully serviced and tested Sewing system: Double-needle movement for even and durable stitches Sewing speed: Up to 1,500 stitches/minute (depending on fabric and button type) Applications: 2- or 4-hole buttons on light, medium, and heavy fabrics Quick adjustments for stitch length, thread tension, and stitch count Automatic lubrication to minimize wear and ensure low maintenance Quiet, high-performance motor—ideal for intensive production environments Advantages The JUKI MB-1800B is engineered for high performance and practical, reliable operation: • Fast and accurate button sewing with perfect centring and secure attachment. • Wide versatility—compatible with various button types and sizes. • Easy adjustments to accommodate different materials and thicknesses. • Robust build and reliable mechanics, characteristic of JUKI quality. • Low noise and minimal vibration for a comfortable working environment. • Simplified maintenance, thanks to automatic lubrication and easy access to key components. Overhauled This machine has been fully reconditioned by our specialized technical department: • Replacement of all wear parts with original or certified compatible spares. • Comprehensive cleaning and calibration of the motor, mechanisms, and sewing systems. • Functional sewing tests and final quality inspection. Delivered ready for immediate operation, the JUKI MB-1800B ensures reliability, precision, and consistent performance, backed by the assurance of a professionally refurbished product. Application Fields The JUKI MB-1800B is suitable for tailoring workshops and industrial garment production. It is ideal for manufacturing men’s, women’s, and children’s apparel (shirts, jackets, trousers, coats). Widely used in the textile and fashion industries where speed and uniform sewing are essential. JUKI is synonymous with Japanese quality and precision. The JUKI MB-1800B – Used and overhauled – is the perfect choice for those seeking professional performance, durability, and value. Thanks to meticulous reconditioning and JUKI’s renowned build quality, it delivers high accuracy and productivity, reducing processing times and enhancing the finish of each garment. Reliable, durable, and ready to use, this machine is a sound investment for tailoring workshops, garment manufacturers, and companies that prioritize efficiency and quality.

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail Rcedsxr Rbaepfx Aabjh - 2x bending rails

Condition: good (used), Year of construction: 1984, 6 spindles Tapping with electronic limit stop Hexagonal punching Calibration Pick-up device Rcedpfx Ajv R U D Tsabsh Many accessories With IEMCA PRA 40/42 F bar loader Includes STEIMEL chip removal, box conveyor, and 24/7 production

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm Rcsdpfx Aasxpkxteboh TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 1180 Nm; 42 kW; 337- 5000 rpm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: 12 POS; PICK-UP CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Redpoxq Aptjfx Aabjch

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of Rcjdpjxpxfbsfx Aabjh - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: excellent (used), Year of construction: 2008, operating hours: 10,755 h, functionality: fully functional, spindle speed (max.): 750 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 640 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,500 kg, grinding spindle speed: 10,500 rpm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 7,000 W, workpiece diameter (max.): 320 mm, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2025, WALTER Helitronic Basic - CNC tool grinding machine TECHNICAL CHARACTERISTICS : Year of manufacturing : 2008 CNC control : FANUC 310i - MODEL A5 Software installed: Tool Studio Version 1.70.0.136 Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Max. workpiece lenght : complete processing: 255 [mm] Rcodpfjwu Tygjx Aabeh Max. workpiece lenght : peripheral grinding: 350 [mm] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Coolant pump pressure: 7 [bars] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Number of running hours: 10755 [h] Weight: 4500 [Kg] EQUIPMENT INCLUDED: x1 Software TOOL STUDIO 1.7 x1 ECO LOADER automatic tool loader x1 tool palett (20 positions) x1 automatic tool clamping unit x1 RENISHAW tool probe x1 calibration ball option : automatic calibration of X, Y and Z axes x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 fire-fighting system (to be inspected by the purchaser by a qualified body) x2 wheel flanges + spacers x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format) ADDITIONAL INFORMATION : Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition Rsdsxrb Hmopfx Aabsch • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: excellent (used), functionality: fully functional, Koenig Mini Rex 4000 bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products weight range 40-135 grams max. cap. 4000 pcs/h year of refubished 2021 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% Rcedpfewr Dnvox Aabeh excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Rjdpfx Ajxmt Eqjabech

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 10111408, Jenoptik Opticline C314 – Optical Shaft Measuring Device Year of manufacture: 2008 Model: C314 Serial number: 10111408 Condition: Fully functional Category: Optical Shaft Measuring Device Availability: Immediately Location: Germany Calibration: 07/2025 according to DIN EN ISO 10360 and VDI/VDE 2617, certificate available Measuring range diameter: 140 mm Measuring range length: 600 mm Workpiece weight: 200 / 300 / 600 N Resolution diameter and length: 0.1 µm Resolution rotation: 0.0006° Diameter accuracy: 1.0 + D[mm]/200 µm Length accuracy: 2.6 + L[mm]/200 µm Repeatability diameter: 0.3 µm Repeatability length: 1.2 µm Software user interface: Turbo Optic 3 Software measuring module: BWMS4 Power supply: 230 V Measuring system dimensions: 700 x 840 x 1355 mm Dimensions with probe: 810 x 840 x 1355 mm Machine weight: approx. 155 kg Accessories weight: approx. 300 kg Accessories: Mobile table frame Manuals: available Technical documentation: available Loading options: Forklift compatible Maintenance status: Maintenance records for 2024 & 2025 available, inspection values without any findings, overall condition: very good Optical shaft measurement systems with multi-sensor technology and highest precision This measuring device is used for quality inspection of the following products: - Turned and precision-turned parts - Components for the automotive industry, e.g. electric motors, drivetrains, steering components, and turbochargers - Blanks and pressed components for the metalworking industry - High-precision parts for medical technology, e.g. implants, bone screws and surgical instruments - Components for injection and nozzle technology - Components for the bearing industry - Parts for turbines and emergency power generators - Parts for the textile and printing machinery industry Rcodjxqh Etspfx Aaboh - Applications in the aerospace sector - Pneumatic and hydraulic components, e.g. pumps - Various electric motors, e.g. for fans, household appliances, positioning and drive systems

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) Rjdpoxpxc Tsfx Aaboch processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: excellent (used), Year of construction: 2020, operating hours: 916 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, workpiece weight (max.): 500 kg, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, MAZAK Variaxis C600 – Vertical Machining Center Rcsdpfxjwv T I Hs Aaboh TECHNICAL CHARACTERISTICS: Number of simultaneous axes: 5 Stroke X axis: 650 [mm] Stroke Y axis: 550 [mm] Stroke Z axis: 530 [mm] Feed rate on X, Y and Z axes: 42000 [mm/min] Min. distance spindle nose / table: 50 [mm] Max. distance spindle nose / table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Max. load on table: 500 [Kg] Stroke C axis : table revolution: 360 [°] B axis swivelling stroke: -30 [°] / +120 [°] Spindle type: BT40 Max. spindle speed: 12000 [rpm] Spindle power: 11 [kW] Tool changer magazin number of stations: 60 Max. tool length: 300 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Total power required: 46.7 [kVA] Supply voltage: 400 [V] Number of running hours: 916 [h] Machine dimensions: 2350 x 2962 x 3039 [mm] Layout dimensions: 5010 x 2470 [mm] Weight: 10000 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW part probe type RMP600 x1 RENISHAW tool probe type PRIMO LTS x1 RENISHAW calibration sphere x1 electronic handwheel x1 chip conveyor x1 high-pressure pump 15 [bar] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling machines, drill and tap machines, and CNC grinding machines.

Condition: used, CNC AKM1325 20V/380V, 50hz /60hz Working area is 1300*2500*200mm Heavy duty structure 7.5kw water cooling spindle Mach3 control system Leadshine M860 drivers stepper motors NEMA34 T slot table Taiwan Hiwin 20mm linear guide rails X,Y axis gear transmission Rcodpoxqy Adefx Aabsh Z axis Taiwan TBI ball screw transmission Fuling inverter Filter / Tool Sensor Tool calibrator Auto oil Lubrication Dust collector 25pcs tools(6*22mm) User manual and instruction, U disk Dispaly, keyboard, computer included Approx 150 work hous

Condition: used, Vötsch Model: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 liters Specifications for temperature testing: Rcsdpfxjxqzbbo Aabeh Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Specifications for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please take note of the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and error) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing Rcsdoxmlgtopfx Aabjh • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Year of construction: 2008, condition: good (used), 2008 Philips Mammo Diagnost (re-badged Siemens Mammomat 3000) Mammography system for screening and diagnostics.First installed 03 2008 Analog Mammography system calibrated for CR with an 18x24 bucky, Anode: Mo Filters: Mo/Rh Grid table: Philips 18x24cm ,Philips 24x30cm Face shield: Standard 16cm, Long 21cm Carbon fibre table /mag table: 1,5 18x24 Siemens Carbon fibre table/ mag table 1,8 18x24 Philips Spot kompression plate 1,8 Philips Spot kompression plate 1,5 Siemens compression plate 1,5 Siemens compression plate 1,8 Philips Xbpcno7r Compression paddles: 18x24 cm high edge Philips Axillae paddle 21cm x 9cm , 28x27x9 cm Contact spot compression 8cm Magnification table x1.8 Redpjdqil Asfx Aabech This system is in very good cosmetic and functional condition. It has been professionally deinstalled and is available for immediate sale. carbon fibre table mag table plate

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Redswn Hhqepfx Aabjch Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders - pneumatic guillotine Machine connected to the power supply and ready to work.

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Rsdpfjxl Rgijx Aaboch

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Rcsdoxl Rf Sepfx Aabjh

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories Rcodpfexl Dbtex Aabjh • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production