Used Light Soaking for sale (17,877)

Condition: good (used), Year of construction: 2012, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Mosca, belt conveyor with adjustable base from GF strapping machine -Speed: frequency controlled, up to approx. 94 m/min -Strap width: 500 mm -Conveying length: 1000 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate Pjdpfxoq Ei Dqj Afhopl -Light barrier: 2 sensors, distance adjustable see photos -Quantity: 1x conveyor belt available -Transport dimensions: 1020/960/H900 mm -Weight: 88kg

Condition: good (used), High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -for: Ultra-high-speed filming -Extremely high light output of up to: 2.3 million lux per head (20 cm working distance) -No thermal stress on the illuminated objects Ppedpodpkzvsfx Afhol

Condition: good (used), Reflective light barrier, light barrier, reflective light switch Ppedpecqp Hlefx Afhel -Number: 2 buttons available -Price: per piece -Weight: 0.05 kg

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting Psdpfx Ajcuh Ensfhopl -Dimensions: 340/140/H80 mm -Connection: 230 V -Number: 1x light available -Weight: 1.0 kg

Condition: good (used), Machine light, machine lamp, work area light, system light, compact light, control cabinet light Ppodpfx Asxv Sncofhsl -Manufacturer: Rittal, LED 1200 system light with motion detector -Type: SZ 2500.300 -Power: 13W / 32 x 0.36W/LED -Number: 5x light fixtures available -Price: per piece -Dimensions: 440/90/H40 mm -Weight: 0.5 kg/piece

Condition: used, Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT45-P660 Ppsdpodnllrsfx Afhsl -Connector: DC 10-60V -Number: 2x sensors available -Price per piece -Total dimensions: 105/60/H180 mm / 170/90/H110 mm -Weight: 0.7/0.8 kg/pc.

Condition: used, Light barrier, safety light curtain Psdpsftpcmefx Afhspl -Protective field height: 1650 mm -Protection class: IP 65 -2x receiver photocell type: C40E-1603CA010 -Price: per piece -Dimensions: 1780/40/H50 mm -Weight: 7 kg

Condition: used, Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm Pjdpfx Afod Tdz Nshepl -Own weight: 180 kg

Condition: used, Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT36-P410 -Connector: DC 10-30V -Number: 2x sensors available -Price per piece -Total dimensions: 150/100/H35 mm -Weight: 0.3 kg/pc. Podpfx Afjiiig Tehjpl

Condition: excellent (used), Reflective light barrier, light barrier, reflective light switch, reflective switch, light switch, reflective light barrier, reflective light switch, one-way light barrier Pedpfxeuz H T Ej Afhepl -Manufacturer: ifm, efector200 photoelectric sensor reflective light switch, original packaging -Type: OJ5122 OJB-FPKG/SO/AS -Cardboard dimensions: 95/65/H30 mm -Weight: 0.1 kg

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box Ppedjp Hiyzopfx Afhol -Manufacturer: Leuze lumiflex, switching part control unit Basis-270 -Voltage: 90-264Vac / 22W, 47-63Hz -Quantity: 4x switching part available -Price per piece -Dimensions: 260/210/H90 mm -Weight: 3.4 kg/pc.

Condition: excellent (used), Reflective light barrier, optic sensor, light sensor, light barrier, optical sensor, photoelectric sensor, reflective light switch, light switch, photoelectric sensor Manufacturer: Banner, Photoelectric sensor, unused, original packaging -Type: Q85VR3DL-T9-B -Cardboard dimensions: 130/90/H50 mm Total weight: 0.3 kg Pedpfx Afjm Ui Itohspl

Condition: good (used), Data light barrier, reflective light barrier, light barrier -12-30 V DC -1215100012 Pjdpfxsb A Nx Ie Afhjpl -Weight: 2 kg

Condition: good (used), Light barrier, safety light curtain Podpfxjtuybqe Afhjpl -Manufacturer: SICK, light barrier type C4000 transmitter -Type: C40S-1201DA040 -Protective field height: 1200 mm -Voltage: 24 VDC -Number: 2x transmitters available -Price per piece -Dimensions: 1360/50/H60 mm -Weight: 2.8 kg/piece

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Ppsdpjx Emqgsfx Afhjl Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest!

Condition: used, maximum load weight: 29,440 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2014, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Year of construction: 2014, Equipment: ABS, * Edscha roof * Lift axle * SP 09/25 * SAF axles Ppsdpouhkfvjfx Afhjl Subject to errors and prior sale Viewing by appointment only WhatsApp inquiries will not be answered

Condition: new, machine/vehicle number: 2f960ff7c44de83fd060ec5df, empty load weight: 6,750 kg, maximum load weight: 28,250 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Underride guard, folding Half-shell mudguards Integrated mudguard holder Stone-repellent surface With anti-spray flaps on last axle only Tarpaulin pole with bracket Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in light Master Agrar design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Greenline - conical and aerodynamic body shape Bucket and brush holder on the outside of the front wall. Membrane rear wall Aluminum rear wall on pendulum bearings with double-joint hinge and with 2-leaf door division 1/2 to 1/2, top with swinging gallows, with one grain slider per door. With external espagnolette lock and mechanical locking at the bottom, Side walls 3 mm thick throughout, base 3 mm thick throughout, wear and weight-optimized design, Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Ppsdpoi Rizfefx Afhel Country of registration / plates Germany Test approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10 J

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Pjdpfox Rvb Sjx Afhepl Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES Psdpfxewqgits Afhopl D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 22, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, 3 x Sprinter 515 and 2 x 517 Lord Light Stock Vehicles COC 100% Made in Germany for the interior fit-out. All original MB components without any cutting work except for the emergency escape hatch. - Length: 7,336 mm - Height: 2,800 mm - Width: 2,001 mm GSR2 assistance systems - 150 HP or 170 HP Euro 6e manual transmission - Tires: 205/75 R 16 C - Tire pressure monitoring system - Main fuel tank: 93 L - HVO compatible - Low-profile roof-mounted indicator lights - Sliding door on the right - Electrically operated sliding door - Electric entry step - Front and rear mud flaps - Comfort driver's seat with armrest - Flip-top lid for dashboard storage compartment - Heated, electrically adjustable and foldable exterior mirrors - Additional rear heat exchanger - Auxiliary warm-air heater for passenger compartment - Basic roof-mounted air conditioning unit - Semi-automatic climate control (Tempmatic) - Digital radio with 2 speakers at the driver’s position - Acoustic package Psdpfx Aeyayg Njfhopl - USB socket - Height- and tilt-adjustable multifunction steering wheel - Headlight assistant - Hill start assist - Rearview camera - Blind spot assist - Crosswind assist - Start-off information assist - Turn assist system - 21 passenger seats with adjustable backrests except last row - Original front passenger seat - Total capacity including driver: 23 - Roof escape hatch emergency exit Also available as 517 with automatic transmission. Price for 517 automatic: €73,490.00 net. Net export possible. Custom orders available.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture Ppsdpfjmb U Tujx Afhsl • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Pjdpfx Asmb U Tfofhjpl • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture Pjdpfx Afomb U Tbohopl • Composites manufacture

Year of construction: 2017, condition: used, Weight: 300 kg Dimensions (LxBxH): 720 x 185 x 163 cm - Machine available from: 2025-12-12 - Details: - └ Description: Machine is not working, needs new Stabilizer doppel, Schienenkopf, oil pump, chain and protective cover. - Year: 2017 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 7.5 - Max. workpiece length [mm]: 7000 - Max. workpiece width [mm]: 1750 - Max. workpiece height [mm]: 1750 - Control: Manual - Voltage [V]: 400 - Power [kW]: 7.5 - Transport dimensions: 7200mm x 1850mm x 1630mm (l x w x h) - Transport weight [kg]: 300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ppodpfx Afex Rycgshjl Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Pjdpfxsx N Nigj Afhjpl Lot 2910010: Lot consisting of 1 used single mitre saw with conveyor belt in good condition. Shows minor signs of use and is suitable for precision cutting operations with pneumatic clamping and automatic feed assistance. Mitre saw: Elumatec TS161/21, year of manufacture 2019. Motor power: 1100 W, 4100 rpm. Feed system: Ruchser RU-LAP3 conveyor unit, 1.5 kW, 50 kg/m load capacity. Electrification: 400 V (saw), 230 V (RU), 50/60 Hz, 3.0 A + 4.5 A. Pneumatics: 7 bar air pressure, pneumatic clamping. Accessories: Integrated control panel, conveyor frame, length stop.