Used Linear Feed for sale (13,463)

Condition: good (used), Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates Fpsdexrk T Nspfx Afpoi -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Condition: used, Year of construction: 2018, overall weight: 230 kg, load capacity: 5 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Fpsdpjxgu S Sofx Afpsi

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA Fpsdpfxozhkl De Afpoi • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter • 1 set of soft jaws for SMW 175-BBD • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump acity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgIEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetAdded options:I-V50011 Collet chuck Type "MPF 65/140" without axial feed for main spindle max. diameter: mping elements and other equipment:I-V50025 Manual collet changer type "SACO MPT65/140 and MPF65/140"I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures.I-V50083 1 set of soft jaws for chuck type "SMW 175-BBD"I-V50080 Chuck type "SMW 175-BBD" For counter spindle, including adapter for adapting the spindleI-V60050 Tool holder for drilling tools with internal cooling and cylindrical shank Ø 32mm,with clamping shank according to DIN 69880 (VDI 30) - 4pcsI-V60010 Radial tool holder for external machining type C1 with clamping shank according to DIN 69880 (VDI 30) - 5pcsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 colletsVarious new spare parts are included. Technical Specification Counter Spindle Yes Fpedezhklwepfx Afpei Driven Tools Yes

Condition: used, Technical specifications: Fpedpfx Afjziadlepji Number of rollers: 4 Motor power: 0.75 kW Continuously variable feed rate: 3-18 m/min Roller size: 120x60 mm Power supply: 380 V

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Fpedpfozg Nmkjx Afpei Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Year of construction: 1989, condition: good (used), • Length of milling 1400 mm • Max. Milling height 120 mm • Max. Width 450 mm • 30 mm spindles • Max spindle diameter 160 mm • Spindle revolutions 8400 / min • Dimensions 4100 x 2000 x 1600 mm Fpsdpfx Afjgqr Shjpsi • Weight without cabin 1600 kg • 2x 5.5 kw motors • Feed 1-15 m / min

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,900 mm, control cabinet width: 76 mm, control cabinet length: 46 mm, control cabinet height: 92 mm, Geiger MotionLiner 10.0 XD Stock number: 503651 Machine type/ Device type: Handling Manufacturer: Geiger Type: MotionLiner 10.0 XD Year of manufacture: 2020 Fjdpfozhkn Eox Afpjpi Handling weight: 10 kg Stroke X-axis: 600 mm Stroke Y-axis: 1200 mm Stroke Z-axis: 1900 mm Console dimensions: 115cm x 20cm x 76cm Control cabinet dimensions: 76cm x 46cm x 92cm Interface: EUR 67 Accessories: EASYTouch HT320Z

Condition: excellent (used), functionality: fully functional, total length: 68,000 mm, total width: 1,100 mm, total height: 5,270 mm, load per truss pair (max.): 3,000 kg, load capacity per storage section: 15,000 kg, number of shelf rows: 4, shelf height: 5,270 mm, SLP SL 30 Pallet Racking Systems – approximately 68 m total length – 24 bay positions – Heavy-duty racking with pallet support rails For sale is a comprehensive package of four high-quality pallet racking systems from the manufacturer SLP, System SL 30 with RTS 110 crossbeam type. The racking systems come from industrial use and are ideally suited for warehouses, logistics centers, production facilities, and the machine and tool building industry. All racks are equipped with pallet support rails for Euro pallets and are designed for high loads. The racking systems were in industrial use until recently and are in used, well-maintained condition with the usual signs of wear and tear due to age and use. The sale is without the storage goods shown in the pictures and any other accessories. Total scope * 4 complete pallet racking systems * Manufacturer: SLP * System: SL 30 * Crossbeam type: RTS 110 * A total of 24 bay positions * Total length of all systems: approx. 68,000 mm (68 m) * Total height: approx. 5,270 mm * Total depth: approx. 1,100 mm * Pallet support rails throughout the entire racking area * Sale as a complete set or individually by agreement Technical data per racking system * Manufacturer: SLP * System: SL 30 * Crossbeam type: RTS 110 Fpodpfx Ajzkunnjfpei * Number of bay positions: 6 * Total length: approx. 17,000 mm * Height: approx. 5,270 mm * Depth: approx. 1,100 mm * Center distance: 2,700 mm * Shelf height: max. 1,050 mm * Shelf load: 3,000 kg * Bay load: 15,000 kg * Equipment: Pallet support rails for Euro pallets Scope of delivery for complete package * 4 complete pallet racking systems * 24 bay positions * a total of 119 crossbeam pairs * 2 systems with 36 crossbeam pairs each * 1 system with 24 crossbeam pairs * 1 system with 23 crossbeam pairs * Frames according to existing design * Pallet support rails for Euro pallet storage * Base plates and connecting parts according to existing design Load capacity * Shelf load per storage level: 3,000 kg * Bay load per bay position: 15,000 kg * Maximum theoretical total bay load of all 24 bay positions: 360,000 kg Special features * Robust, heavy-duty steel construction * Industrial design * Flexible plug-in system * Crossbeams height-adjustable * Suitable for Euro pallets and heavy storage goods * Partially different shelf configurations (23, 24, or 36 crossbeam pairs) * Modular and expandable A rack inspection according to DIN EN 15635 was carried out by B-Knape GmbH. Inspections are possible at any time by prior appointment. Sale preferably as a complete package. Individual sale is also possible. Subject to prior sale.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Fodpfjzg Dnvox Afpepi Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: used, Year of construction: 2004, operating hours: 1,53,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm Fodpfxszgggus Afpjpi C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,300 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Tilting mixer Diosna tilting mixer, extendable Model: D 200 a 2 mixing bowls Robust design 2 speeds Connection: 400V, 32A-CEE plug Used machine, refurbished Options: Fpjdpfjuyrzrjx Afpoi Leasing & rental service Floor anchoring Delivery service Maintenance contract E-Box Service package Training & commissioning More tilting mixers in stock!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining Center Deckel Maho Type DMC 104 V Linear Year 2005 CNC Fanuc 180 iMB Fodozhw Raspfx Afpopi Includes tooling Includes documentation Only 4,600 operating hours (machine used very little)

Condition: good (used), Year of construction: 2017, 1x used Wittmann W832 Year of manufacture: 2017 X-500 Y-1400 Z-3000 The robot would be available immediately. Fpedpfjzk H Efex Afpei

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information. Fedpfx Afsyzg Udspepi

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Fedpfx Aozgdk Dofpepi Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data Fpsdpfx Aoy U Hh Dsfpoi MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Fpedpfx Aozd Tg Asfpoi Location: Nattheim.

Condition: used, Rotary milling cutter with 3-roller feed mechanism. Location: Nattheim. Fpedpfozd Tgvjx Afpei

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Fsdpfx Afszi Dzhjpspi Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve Fpedpszg U Dnofx Afpei cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Linear Tables for Workpieces up to 80 tons The ZEATZ PHL linear series combines highly precise rotary table technology with an integrated linear axis, offering maximum flexibility for complex machining tasks. Ideal for positioning, simultaneous rotation, and interpolation machining for large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Financing and lease-to-own options available upon request ✔ 24-month warranty Why ZEATZ: ZEATZ stands for highly precise NC rotary tables and innovative solutions for demanding machining processes. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, the systems are ideally suited for heavy machining and the highest accuracy requirements. Technical features: Applications: Positioning | Simultaneous rotation | Interpolation machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Max. workpiece weight: approx. 6,000 to 80,000 kg Linear axis: Optionally integrated linear axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: Fpsdpfx Afem Tv Azjpei ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Your advantages as a JMT customer: ✔ Official sales partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Support for integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: good (used), Year of construction: 2022, Universal machining center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year: 2022 SPECIFICATIONS Travel X-Axis: 3.600 mm Y-Axis: 1.100 mm Z-Axis: 900 mm B-Axes C-Axis Amount of controlled axes: 5 Dynamikpaket für DMF 360 linear (Y1100) Rapid motion: (X/Y/Z): 80 / 60 / 60 m/min. Fsdpfxozizcio Afpepi Spindle speeds: 20 - 10.000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool: SK 50 Toolchanger Tool capacity: 120 NC rotary table Table size: 4.200 x 1.100 mm Max. Table Load: 1.200 kg Equipment Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Chip rinsing pistol Oil mist separator Air blow Caliper: Heidenhain TS 460 Vorbereitung für den Einsatz 3D quickSet Automatic doors Electronical handwheel

Condition: good (used), functionality: fully functional, Internal article number: 26060 Lead screw and feed spindle lathe Leinen DLZ 140 + Digital display + Multifix "A" base plate + Three-jaw chuck + Four-jaw chuck Center height: 140 mm Distance between centers: 500 mm Spindle speed: 15 - 3100 rpm This machine comes from an educational institution and is in good condition. Fpsdpfx Ajzd Txlsfpei You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: good (used), ZMM SLIVEN CU 400 Control and lead screw lathe Distance between centers 1,500 mm Distance between centers 250 mm Turning diameter over bed 500 mm Turning diameter over slide 240 mm Spindle bore 72 mm 27 spindle speeds from 20-2,000 rpm Feed rate Y-axis 0.04-12 mm/rev Feed rate X-axis 0.02-6 mm/rev Travel X-axis 315 mm Motor power 7.5 kW Machine weight approx. 3,000 kg Equipment: Digital display MITUTOYO Tool holder Fodpfx Aszi Nz Tefpjpi 6 tool holder inserts 3-jaw chuck 250 mm All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free on Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase