Used Log for sale (28,201)

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front Dedpfx Adei Ri H Dodowf 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Condition: used, maximum load weight: 22,590 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 07/1989, DIEBOLT two-axle telescopic semi-trailer with timber loading crane mounted on the gooseneck, loading platform extension to approx. 15,540 mm, Loglift grab, turntable support, 1 x hydraulic extensions, grab control, high-seat control, BPW axle(s), twin tyres, drum brake system, leaf suspension, towing coupling, vehicle may be wrapped and/or labelled with advertising Dwjdpfx Ajxfpb Esddjf

Condition: used, maximum load weight: 17,450 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 02/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Underride guard steel plastic mudguards continuous aluminum frame cover manual mechanical support (5t drawbar load) drum brakes 2 LED work lights stool body, 4 x Doll steel stools type Mammut 8 x Doll square stanchions rigid 2550mm loading lengths: 2 x 2000 mm/ 2500 mm/ 3000 mm or 1 x 4000 mm/ 5000 mm/ 6000 mm 50 mm drawbar eye Dwodpfx Asr Ahg Djddof

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition Dsdpfxegvvvls Addswf 2 pieces available roller length: 800 mm roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: used, Log debarker Manufacturer: Valon Kone Model: VK26M Debarking capacity: 10cm -61cm diameter Rotor opening = 65cm Speed: 17-42m / min Dodpjxiv Srofx Addswf 3m or longer (wood length) Length 2.90m Width 1.65m Height 2.20m

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2022, Year of construction: 2022, Equipment: ABS, * Doll H3L-14 timber transporter * First registration: 02-2022 * Telescopic 9.45 - 12.95 m * SAF axles * Tyres 385 / 65 R 22.5 * Disc brakes Dwedpfxexqvxzs Addsf * Lift axle * Unladen weight: 6,140 kg * Payload: 35,860 kg * Gross weight: 42,000 kg * More pictures and videos via Whatsapp * Information provided without guarantee; intermediate sale reserved.

Condition: used, maximum load weight: 31,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, next inspection (TÜV): 02/2023, loading space length: 13,000 mm, total width: 2,550 mm, total height: 1,320 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. Dedpfx Asi Rtd Ieddjwf We are happy to provide you with further information

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Dodpfsxg Rvgjx Addowf

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 Dsdpfx Asxpvr Seddowf In daily operation Condition: Well maintained.

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment. Dwodexp Hzdjpfx Addef

Condition: used, Year of construction: 1999, Jonsered 1090 log crane for sale IDL000814 Dwjdju Efwqopfx Addjf

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections Dwedpfjw Rg Emjx Addsf - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa stool bodies * 16x OptiPa one-piece aluminum stanchions * Sturdy aluminum front wall approx. 2500 mm high * Max. fifth-wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with starting aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart-Board * EBS brake system * All cables are protected inside the side members * 3 mm smooth sheet metal cover welded through between the side members * Tires: 6x brand-name tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Round tube underride guard mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Anodized aluminium side bumpers Dwjdpfx Aei Rtgqjddsf * KTL coating with zinc phosphating, highest corrosion protection Also available for hire at short notice. Further information on request.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Dwjdpfxjxgt U Ee Addjf Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/1992, Year of construction: 1992, Internal vehicle number: G200183 German vehicle At our yard in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Djdpfx Adowcuznjdjwf   Unladen weight 7,300 kg Gross vehicle weight 35,000 kg   Subject to errors   We are happy to accept your used vehicle in trade. Financing available directly with us in-house. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, axle configuration: 3 axles, first registration: 07/2015, Equipment: ABS,

Year of construction: 2024, condition: new, Log cross conveyor Dwsdehmp Ibopfx Addsf - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors - solid pin conveyor chain with gentle rollers

Condition: good (used), Year of construction: 1985, functionality: fully functional, Heavy-duty log cross conveyor Dwjdpfx Adjuthh Hedsf ( was behind a debarking line ) year of construction approx. 1985 4 conveyor lines, motorized length approx. 8m width 4,35m Height approx. 1.8m ( will be delivered disassembled ) in good condition

Condition: new, maximum load weight: 32,900 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 2,450 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting wood and long material. * Chassis length approx. 13510 mm (head frame - head frame) * Chassis width approx. 2540 mm (outer frame - outer frame) * Driving height unloaded approx. 1400 mm with fifth wheel height 1200 mm * Maximum fifth wheel load approx. 16000 kg * Front overhang (kingpin to front edge of KoRa) 1550 mm * King pin 2" according to SAE standard, replaceable from below * E-bike holder for 1 E-bike * 16 stanchion pockets embedded in the outer frame * 8 pockets as storage for stanchions distributed centrally over the entire length * Front wall approx. 2500 mm high, angled corners with sheet metal cladding * Steel floor 4/6 mm tear plate cover * Outer frame with rounded edges and holes for load securing approx. every 500 mm * Axle lift first axle, automatic function, with traction aid * Axle distance approx. 1310/1310 mm * Branded tires 385/65 R 22.5 * EBS braking system with roll stability program * Smartboard/TIM/Infocenter, in addition to the H+S valve * LED lighting system * LED work lights * 2x plastic toolbox Djdpfx Asvw Hnwoddswf We are happy to provide you with further information

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW Dwjdpfx Adjt Hf T Hedjf milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/2015, loading space length: 7,500 mm, Year of construction: 2015, Equipment: ABS, Manufacturer Menke-Janzen Model 24 t. 3 axle Woodtransport / Holztransport Year 2015 Condition Good Serial Number W09W01327FWJ16483 Ref. nr. 7984 Reg. date: Last seen: Disc brake: ? ABS: ? Axles: ROR Suspension: Air Tire Size: 275/70R22,5 Tire % back 50 - 70 - 70% Toolbox: ? Djdpfx Ajxiucvoddowf Total weight: 24000 kg. Weight: 6140 kg. Load capacity 17860 kg. Inner length: 7600 mm.

Condition: used, axle configuration: 3 axles, first registration: 07/2015, Equipment: ABS,

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake Dwedpegvu Alofx Addjf - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69803 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection couplings (red and yellow) * 15-pin connector plug * Lifting and lowering mechanism * Suspension: Air * Total weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% – 70% – Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 30% – 30% – Tyre size: 385/55 R22.5 * Tyre condition 3rd axle: 50% – 50% – Tyre size: 385/55 R22.5 * Tyre sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber and metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm Dedpfxow A Hmcj Addewf * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, wooden superstructure with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Special features: Lift axle / timber transport / SAF axle Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, easy financing options * Processing of all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration services * Transfer of commercial vehicles Ask our trained staff, we are happy to advise you.

Condition: used, maximum load weight: 31,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 01/2023, loading space length: 13,000 mm, total width: 2,550 mm, total height: 1,320 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information Dwedpfxsi Rtd Dj Addef