Used Magnetic Base for sale (8,034)

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Hedpfexf Uygox Acbjfg Serial no.: 421850 Load capacity: 1000 kg Magnet diameter: 250 mm Power consumption: 0.662 amperes Mains connection: 200 volts DC = direct current - An external power supply is required (not included) - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: good (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector Hfsdpfjyguy Rsx Acbeg -Manufacturer: wöhner, NH-Reiter fuse base, 3 pieces, unused, original packaging -Type: NH 3 630 A -Quantity: 3 boxes with 3 items each available -Price: per set -Cardboard dimensions: 220/190/H110 mm -Weight: 2.3 kg/set

Condition: new, Double sine table with fine-pole magnetic chuck Magnetic chuck with mechanical on/off switch. Precise and stable construction. Tiltable in 2 axes. For clamping and machining workpieces at any required angle. Uniform holding force across the pole face. Accurate angle adjustment via gauge blocks. Length: 300 mm Width: 150 mm Height: 142 mm Hedoymzpfepfx Acbsfg Angle: 0–60° Weight: 37.5 kg

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: Hodpfx Ajtqfhxjcbefg For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Hfjdsxcbppspfx Acbeg Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: excellent (used), Magnetic vice Make: Eclipse Type 927 4 inches Clamping jaw width 104 mm Height 33 cm Opening width 57 mm Total height 69 mm Weight 7.5 kg Stock number (28591) Hfsdpfx Asvx E Ryscbog

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Hfsdpfx Acewnpkbsbog Weight approx. 250 kg.

Condition: used, Year of construction: 2017, VWS Nederland – Top/Base Labeling Machine (R → L) Manufacturer: VWS Nederland Type: Top / Base Labeling Machine (Right → Left) Year of manufacture: 2017 Hodsyt Hmvspfx Acbjfg Description The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines. This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required. Technical Specifications - Manufacturer: VWS Nederland - Machine type: Top and bottom labeling machine - Labeling direction: Right → Left (R → L) - Label positions: Top and base (bottom) - Year of manufacture: 2017 - Application: Automatic labeling of trays, containers, and packaged products - Integration: Suitable for inline production and packaging lines Key Features - Automatic top and bottom labeling - Right-to-left product flow - Designed for high labeling accuracy - Suitable for various product sizes and packaging formats - Robust industrial construction Applications - Food packaging lines - Pharmaceutical products - Cosmetics and consumer goods - Industrial packaging operations Condition Used Manufacturer: VWS Nederland

Condition: excellent (used), 1 set of spiral base jaws (28539) Hedpfxoud Sk Ej Acbjfg Dimensions, see photo

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary Hedpschuvrsfx Acbofg

Condition: used, Year of construction: 2017, functionality: fully functional, The bankruptcy administrator is offering for sale: MHS (VanRiet) Sorter – dismantled and prepared for transport E-commerce parcel sorter manufactured by VanRiet (Van Riet Material Handling Systems BV). Disassembled and ready for transport. The sorter includes: a) three roller conveyor lines with 72 shipping stations; b) one roller conveyor line; c) a removal line (belt conveyor) for excess cartons running parallel to each shipping line (3 lines) and the returns line (1 line); this leads outside the building to a compactor container (the container is not part of this listing); d) one chute line for parcels to 46 locations, equipped with a scanner for determining the size and weight of individual parcels. Hjdpswaimysfx Acbjfg The sorter has a throughput of up to 6,000 parcels per hour. The valuation includes additional photographic documentation illustrating the technical condition of the appraised items as well as detailed components of the sorter. The sorter operates by assigning and preparing parcels for shipment to specified courier companies. Goods should be packed either in a box or polybag. An operator scans the goods and prints a label for each box or polybag. Information about the box/container is sent from the sorter to the MHS (VanRiet) controller. Meanwhile, the operator loads the box/container onto the loading line. Products are conveyed downstream, then merged onto a single conveyor line. At the merger point, a scanner equipped with a camera identifies the item, measures its dimensions, and the product is then sorted to its designated output (pickup location for ready-to-ship parcels). The MHS (VanRiet) sorter is suitable for handling products of various dimensions. It handles cartons with the following range of sizes: length 150–800 mm, width 100–600 mm, height 10–400 mm, and weight from 0.25 kg up to 32 kg. Polybags with the following range: length 200–550 mm, width 150–550 mm, height 13–400 mm, and weight from 0.25 kg up to 10 kg. The MHS (VanRiet) sorter processes up to 6,000 parcels per hour, with shipments sorted into one of 46 directions. A diagram showing the general layout of the sorter is provided below. Lines 1–3 are outbound shipping lines, and line 4 (added in 2020) is used for processing returns.

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Hfedpfsx Npnvjx Acbeg Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Hodpfexur Itex Acbefg Measurements: Total length: 270 cm, Width of the rubber belt: 110 cm

Condition: good (used), Total length 3300mm Discharge height approx. 2050mm Width: 300mm Quantity: 3 pieces Hsdpfohc Szmox Acbefg Price/ piece

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Hedpfxjx U Eh Ne Acbsfg Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Year of construction: 2025, condition: new, Overband magnet Length: 2500 mm Height: około 400 mm Hsdpeh U R Tgefx Acbsfg Width: 1000 mm Belt width: 750 mm Magnet width: 500 mm Magnet length: 1044 mm Power: 1,5 kW(hydraulic or electric) Magnet field: 400 Gauss(may catch 100 mm pieces from maximum distance 300 mm Overband new, 12 months warrenty,

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg Hfjdpfjudywgjx Acbeg

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Hfodpfx Acsxgp E Tjbjg Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm height 75 mm Voltage 90 Volt 0.4 Ampere Weight 58 kg Hfjdpfstrngpjx Acbeg

Condition: like new (used), functionality: fully functional, This is a base cabinet, UG II type bakery standard from the manufacturer Rational. The base cabinet is suitable for the Rational combi steamers of the iCombi series size 6-1/1 and 10-1/1. The base frame has 14 shelves for bakery standard 400x600mm. The price quoted is net plus 19% VAT. Are you looking for a specific type of Rational appliance? Ask us, we have access to an extensive range of used and new products. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used appliance service for you - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: Hfsdsvclc Dspfx Acbjg - Dimensions W x D x H: 860 x 703 x 699 mm - 14 pairs of support rails 400 x 600 mm, - Lid and sides closed, - back and front open. Condition: Very good used condition Shipping: - Delivery or collection by arrangement - Weltweiter Versand auf Anfrage / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: used, Technical details: Hsdpfxju N Dr Ij Acbofg Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm *

Condition: used, Technical details: weight of the machine approx.: 8kg kg Hfsdeu N Dw Depfx Acbeg dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Technical details: Hsdpfx Aeu N Dy Sjcbsfg Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm *

Condition: used, Technical details: Hfedpfsu N Dmxex Acbsg weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Year of construction: 1974, Technical details: voltage: 220 V Hfedpfeu N D Ntox Acbsg clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate 120 watts 13x induction loops, width 20mm spacing 43mm *