Used Magnetic Separator for sale (6,990)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon Ksdpfoyrhtnsx Ahajdl 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox Kdsdpeyrhrwefx Ahaol • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW Kjdpfxeyrhqte Ahaedl 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters Kodpfjyrhp Aox Ahajdl • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Ksdpfjyrhppjx Ahasdl Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Ksdpfxjy D Nl Re Ahaedl Manufacturer: Lima Model: RM 700 DSP Year: 2000 Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Condition: excellent (used), Year of construction: 2004, Sepamatic Sepa 2000 Separator SEPA 2000 separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Kdjdpfxsy D H U Ae Ahajl Manufacturer: Sepamatic Model: Sepa 2000  Year: 2004 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300×1.300×1.700 mm Machine Weight: 1.400 kg.

Year of construction: 2012, condition: used, functionality: fully functional, For sale are 3 ballistic separators from Hartner. Two of them are still integrated into our production and can be inspected on site. The conversion is scheduled for around the beginning of June 2026. All technical data can be found in the images. If you have any further questions, please feel free to contact us. Kodpfx Aeyrngujhasdl

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator * Type: Autosort NIR1 S2000 X-L Kdsdpfx Ahjywnf Noael

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator * Type: Autosort NIR1 S2000 X-L Kdsdjywnf Aepfx Ahajl * Incl.: belt conveyor with length 5000 mm, * Beltwidth: 2000 mm.

Condition: ready for operation (used), * Brand: Wagner * Model: electro magnetic conveyor belt * Length frame: A-A = 3600 mm Kdedjywnfcjpfx Ahael * Beltwidth: 1200 mm * Driving: 3 kW gearbox * Dim. Block: 1700 x 1150 x 400mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Wagner * Model: electro magnetic conveyor belt * Length frame: A-A = 2800 mm * Beltwidth: 650 mm * Driving: 3 kW drum motor Kdedpoywnd Sefx Ahajl * Dim. Block : 2000 x 600 x 350mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Goudsmit Kedpeywnd Eofx Ahasdl * Model: electro magnetic conveyor belt * On stock: 2 pieces * 1x Dim. belt conveyor: A-A = 2500 mm * Beltwidth: 1300 mm * Dim. block: 1600 x 1200 x 500 mm * Driving: gearbox 3 kW * Incl.: rectifier. * 1x Dim. belt conveyor: A-A = 3000 mm * Beltwidth: 1400 mm * Dim. block: 2300 x 1300 x 500 mm * Driving: 4 kW gearbox. * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic conveyor belt * Block: L= 1400 x W=450 x H=300 mm. Kdsdpfx Aheywndroael * Length frame: A-A = 2000 mm. * Beltwidth: 550 mm. * Driving: 2 kW drum motor.

Condition: ready for operation (used), * Brand: Wagner * Model: electro magnetic conveyor belt * On stock: 2 pieces * 1x Length frame: A-A = 2500 mm, Beltwidth: 1150 mm Kdjdpfxoywndle Ahael * Driving: 4 kW gearbox * Dim. Block: 1150 x 1150 x 600mm * Incl.: rectifier. * 1x Length frame: A-A = 2600 mm, Beltwidth: 1200 mm * Driving: 7 kW gearbox * Dim. Block : 1700 x 1150 x 600mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic block * Type: Neodymium * Dim. block: length 1150 mm, width 180 mm, height 80 mm. Kjdpfeywnc Ujx Ahasdl

Condition: ready for operation (used), * Brand: Steinert * Model: electro magnetic conveyor belt Kdjdoywnbwspfx Ahael * Length frame: A-A = 2000 mm * Beltwidth: 1100 mm * Driving: 2 kW gearbox * Dim. block: 1150 x 1000 x 600mm * On stock: 1 piece.

Condition: ready for operation (used), * Brand: Lenoir * Model: electro magnetic conveyor belt * Dim. belt conveyor: A-A = 3000 mm * Beltwidth: 1400 mm. * Driving: 15 kW * Dim. block : L= 2100 x W=1400 x H=550 mm * Incl.: rectifier. Kdjdpfxeywnbqs Ahaol

Condition: ready for operation (used), * Brand: WOKO * Model: electro magnetic conveyor belt * Length frame: A-A = 2600 mm * Beltwidth: 1400 mm * Driving: 4 kW E-motor. Kodpfx Ahoywm Upsasdl * Dim. block: 2100 x 1400 x 430 mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Wagner * Length frame: A-A = 2600 mm * Beltwidth: 1200 mm * Driving: 3 kW gearbox * Dim. Block: 1600 x 1100 x 600mm Kdsdpfxjywm T Ss Ahajl * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Wagner Kodpfx Aoywm T Eshasdl * Model: permanent magnetic conveyor belt * Length frame: A-A = 2000 mm * Beltwidth: 800 mm. * Block: 1250 mm x 800 mm x 250 mm * Driving: 2,2 kW e-motor.

Condition: ready for operation (used), * Brand: Steinert * Model: electro magnetic conveyor belt * Length frame: A-A = 1900 mm * Beltwidth: 900 mm Kjdpjywm Txjfx Ahajdl * Driving: 2 kW gearbox * Dim. block : 1000 x 1200 x 500 mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Lenoir * Model: electro magnetic conveyor belt * Dim. belt conveyor: A-A = 2700 mm * Beltwidth: 1200 mm. Kdsdpfx Ahoywm D Roael * Driving: 3 kW gearbox * Dim. block: L= 1800 x W=1200 x H=450 mm * Power block: 10 kW * Incl.: new rectifier.

Condition: ready for operation (used), * Brand: Steinert * Model: electro magnetic drum * Dimension drum: lenght 1300 mm , Ø 500 mm. * Driving: 4 kW gearbox. * Power drum: 3 kW. Kjdpfxsywm D Ds Ahasdl * Incl.: new rectifier.

Condition: ready for operation (used), * Brand: Master Magnets Limited * Model: electro magnetic conveyor belt * Length frame: A-A = 2200 mm * Beltwidth: 950 mm. * Driving: 2,2 kW gearbox * Dim. block: L= 1500 x W=800 x H=570 mm * Power block: 2,5 kW * Incl.: rectifier. Kjdpfx Aoywm A Tohaodl