Used Maho 600 P for sale (431)

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Lajdey Ib H Iepfx Ackjb Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Laedpsy Ib A Nefx Acksb Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Lsdpjy H Itlsfx Ackeab -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW Lsdsy Sbikjpfx Ackjab max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 120 positions, chip conveyor, coolant system, NC extension table (AR1), operating mode 4.

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Lodpfjygctrox Ackeab Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details. • Table size: 1000 x 600 mm • Tool magazine: 2x12 positions • Incl. a set of tool holders • Under power and well maintained machine. Lsdpfx Asy Hktbeckeab Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Ljdpfx Aey Hizqockjab Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm Lsdpey E Tv Asfx Ackjab max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) NC swivel head Tool holder: HSK 63 FD function Pallet changer Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced Lajdpfey Ep Rtsx Acksb

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Lajdpfey E Iztox Ackjb Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Ledpoyi Dnijfx Ackjab Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Lasdpfjw Ew T Sox Acksb Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA Ljdjy E Np Sjpfx Ackjab weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 500 mm, table length: 700 mm, rotational speed (max.): 9,000 rpm, rotational speed (min.): 20 rpm, table load: 200 kg, overall weight: 3,500 kg, workpiece weight (max.): 6 kg, space requirement width: 2,300 mm, space requirement length: 2,300 mm, space requirement height: 2,000 mm, For sale: Deckel MAHO DMU 50 T. Year of manufacture: 2001. The machine is equipped with the popular and powerful Heidenhain MillPlus / 3D path control, Lajdey Raf Uspfx Acksb workshop-serviced and immediately ready for operation. 3-axis base machine with manual swivel rotary table [3+2 axes]. Available from calendar week 21. Can be inspected under power at the location near Salzburg, Austria, immediately. Condition: Very good (low operating hours for its age) Incl. accessories. Machine weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: Mill Plus, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. • Spindle cooling: Active cooling • Cooling: Air or coolant • Internal coolant supply: 40 bar (through-spindle) • Tool changer: 32 stations • Operating mode: Mode 4 (working with open door) Additional equipment • Belt filter system: Interlit SPD 3-600-HD • Mist collector • Rotoclear viewing window • Control cabinet cooling unit Ledpfx Aex D Iunjckeab

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Lajdpfxsy E N Dce Ackjb Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Lasdsy Rxvljpfx Ackjb

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. Lasdjy D Ilcopfx Ackjb • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, CNC 5-Axis Universal Machining Center Deckel Maho DMC 80U hi-dyn Year of manufacture: 2000 Control: Heidenhain TNC 430 Travel range: X = 800 mm Y = 700 mm Z = 600 mm Speed range: 0 - 12,000 rpm Tool holder: ISO 40 Tool changer: 60-station tool magazine Table: 800 x 635 mm Drive: 10.0 kW milling spindle Pallet changer Internal coolant system with high-pressure pump and compact filter system Chip conveyor Spindle cooling Laodpfxsv Rvqbe Ackob Blohm tool dimensioning

Condition: excellent (used), Year of construction: 2004, Deckel Maho DMC 60U hi-dyn 5-axis Control: Heidenhain iTNC 530 Spindle speed range: 12,000 rpm Spindle bore: SK40 Number of axes: 5 Travel path: X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Lasdpfxev Rvp Dj Ackob Table: Outer length: 630 mm Outer width: 500 mm Internal cooling: Yes, with paper belt filter Blohm tool sizing system Cooling pressure: 40 bar Machine equipped with two 650 x 500 mm pallets Machine equipped with 120 tool holders

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, CNC control Heidenhain TNC 426 24-fold automatic tool changer handwheel chip conveyor coolant device Technische Daten / technical details: X-Weg / X-travel 630 mm Y-Weg / Y-travel 500 mm Z-Weg / Z-travel 500 mm Spindelaufnahme / spindle taper BT 40 Drehzahlbereich / spindle speed 0-8000 UpM /rpm Ledpfoy Dqxfsx Ackjab Vorschubbereich / feed range 1-30000 mm/min Eilgang / rapid feed 30 m/min Tischaufspannfläche / table clamping area 800x500 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung / drive capacity 30 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 100 mm, quill travel distance: 100 mm, mount diameter: 40 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,146 mm, total width: 3,050 mm, total length: 3,300 mm, We are offering this very well-preserved MAHO MH-C 900 milling machine. Factory number: 90167 Infinitely variable speed Documentation available. Lasdsyryudopfx Ackeb If you have any questions or require more information, feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With Heidenhain iTNC 530 path control Year of manufacture: 2005 Travel distances: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm stepless (HSK 63) With the following accessories: Rigid angle table, 1250 mm x 700 mm clamping surface 3D measuring probe Heidenhain Tool measurement in the working area via BLUM Laser Vertical tool changer with 32 magazine slots (HSK 63) Full protection enclosure with sliding doors and internal lighting Electronic handwheel Operating modes 3 + 4 Chip conveyor Coolant system 3 height-adjustable machine mounts Spindle oil cooler Control cabinet cooling unit (Rittal) Operating manuals Ljdpfjy A Sf Rjx Ackoab

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment Lodpfxoy A Ip Ej Ackeab • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Lasdpfx Aoy Iw H Rjckjb