Used Maho 600 for sale (443)

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Nedpfxoyv H I He Ah Rjkw Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 Nsdpfox S Rxnex Ah Rjkw T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: reconditioned (used), Year of construction: 2011, CNC Vertical Machining Center DECKEL MAHO DMF 260 linear, NEW DMG Design With Siemens 840 D path control with Shop Mill Year of manufacture: 2011 Travel distances: X 2600 mm Y 700 mm Z 700 mm Spindle speed range: 20 – 14,000 rpm, stepless (SK 40) Including the following accessories: - Rigid angle table, 2920 mm x 750 mm clamping area - Controlled swivel milling head (B axis) - NC rotary table by Hofmann with tailstock, center height: 200 mm - Vertical tool changer with 40 magazine slots (SK 40) - Electronic handwheel - Full enclosure with sliding doors and interior lighting - Coolant high pressure system, 40 bar - Chip conveyor - Operating modes 3 + 4 - 2 x Rotoclear (rotating viewing window) - Partition wall - Coolant system - RITTAL control cabinet cooler - 4 height-adjustable machine feet Nodpfxeyvvlno Ah Rjkw - Operating manual

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Control Unit Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Table Table load 600 kg Nsdsx R E Izepfx Ah Rokw This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand FANUC Model Series 18i-MB General Data Machine weight 4500 kg Njdpsx D Dygjfx Ah Rokw Measurements height 2700 mm Dimensions Machine Length 3300 mm Table Table load 500 kg Table Width 1200 mm Table Length 600 mm Main Drive Number of axis 3 Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper SK 40 Tools Max weight 8 kg Movement X-Axis Movement 1000 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103V was manufactured in 2003. It features a FANUC Series 18i-MB CNC control, with axis travels of 1000 mm in X, 600mm in Y, and 500 mm in Z. The spindle supports SK40 tooling, operates at 10,000 rpm, and the table can handle loads up to 500 kg. Consider the opportunity to buy this DECKEL MAHO DMC 103V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min Nedpfjxl E Stox Ah Rokw distance spindle nose and table min 50 / max 400 mm quill stroke 60.0 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, Nedpfeikbtnsx Ah Rekw approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Nkedsyv Ap Hspfx Ah Rsw Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, Year of construction: 1975, Universal milling machine MAHO MH800, year approx. 1975 Spindle mount ISO 40 X-800 mm with universal table. Y axis feed not working? Weight approx. 3 t. Nodpfoyvr Eqjx Ah Rekw Machine documentation available.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,828 h, functionality: fully functional, machine/vehicle number: 1144 000316 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 80 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,400 kg, rotary table diameter: 900 mm, rotational speed (max.): 30 rpm, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 30,294 h, spindle motor power: 44,000 W, spindle nose: SK50, number of slots in tool magazine: 60, Equipment: rotational speed infinitely variable, For sale: DMG DMU 80P Duoblock machining center from 2008. The machine is already located in Poland and can be inspected under power. Nkedpfx Ajyvufmeh Rsw Key specifications: • Control: Heidenhain iTNC 530 • Spindle taper: SK50 • Spindle speed: 10,000 rpm • Operating hours: approx. 30,000 h • Workpiece probe: Heidenhain • Tool probe: BLUM • 3D Quick Set software Additional information: • Fully functional • In continuous operation until dismantling • Good technical condition Machine is available immediately. Inspection under power possible. Please contact me for price, additional photos, or technical details.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous • Table size: approx. Ø 900 × 700 mm • Max. workpiece weight: approx. 1400–1800 kg • Spindle type: Vertical milling spindle Nkjdpfx Aheyvhfmj Rjw • Coolant through spindle (CTS): yes • CE compliant • Condition: Very good working condition; full service history available Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Nksdpfx Ajyuzg Hoh Rjw Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, total height: 2,400 mm, total width: 1,850 mm, total length: 1,620 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 71235 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 8.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 900 - Table width [mm]: 500 - Tool holder: ISO40 Nodpex Npm Eofx Ah Rjkw - Main spindle power [kW]: 4 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1620mm x 1850mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Nodpfx Ahex Stl Ds Rjkw Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 6500 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 18000 rpm Spindle motor power 35 kW Number of axis 3 Nkedpfox R E Iusx Ah Rjw Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm This 4-axis DECKEL MAHO DMC 50 H horizontal machining centre was manufactured in 2001. Ideal for precision machining, it offers robust construction and reliable performance. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Nsdpfx Aeyufn Ish Rokw Parts shown by hand not come.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Nodpeyu Twkefx Ah Rskw Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 1985, machine/vehicle number: 11429, For sale: MAHO MH 1000c milling machine Serial no.: 11429; BKW GmbH model S..05ES Year: 1985; 18 bar; Volume: 1.6 m3/h; 3000 rpm; Power: 0.36 kW; 50-60 Hz; Voltage: 190-240 V; Current: 2.85 A; Net price: 9000 Euro Nksdoyuwr Sopfx Ah Rjw

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Nedpfox D Duksx Ah Rjkw Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 15000 rpm This 5-axis DECKEL MAHO DMC 70 Evo was manufactured in 2007. It features a HEIDENHAIN TNC 530 CNC control, HSK 63, and a spindle speed of 15,000 rpm. Includes a pallet changer with a size of 500 × 500 mm and a high-pressure through-spindle coolant system. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 70 Evo machine we have for sale. Contact us for more information about this machine. Application Types Milling Nksdpfxex D R Uks Ah Rsw

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3500 mm Measurements depth 3000 mm Measurements height 2500 mm Main Drive Spindle speed range 18000 Tool taper HSK-63A Number of axis 4 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 26,000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 26,000 mm/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 20,000 mm/min Table Table load 400 kg Tools Number of index 20 This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. Application Types Milling Nkodpfex D I Ibsx Ah Row

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Machine Length 2800 mm Main Drive Number of axis 3 Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Application Types Milling Nodpfsx E Ef Aex Ah Rokw

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Rotary range (C axis) 360° Max. table load: 200 kg Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Nodpfx Aheyr Safo Rskw Control: Heidenhain Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Condition: excellent (used), Year of construction: 1992, 1 pre-owned, very well-maintained universal tool milling machine with 3-axis digital readout, brand HEIDENHAIN, and stepless speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992! Working area Table size: 1250 x 740 mm Travel ranges X-axis: 1000 mm Nsdpfjygctrjx Ah Rekw Y-axis (vertical): 600 mm Z-axis (transverse): 750 mm Manual cross traverse of the table: 275 mm Working spindle Tool holder (DIN 2079): ISO 40 Quill stroke of the vertical spindle: 125 mm Speeds and feeds Spindle speed range: 32 – 1600 rpm, steplessly adjustable Feed range X + Z axis: 10 – 500 mm/min Rapid traverse X + Z axis: 1.4 m/min Feed range Y axis: 5 – 250 mm/min Rapid traverse Y axis: 0.7 m/min Drive power: 5.5 kW Resolution of linear measuring systems: 0.01 mm Weight and space requirement Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital display, brand HEIDENHAIN • Tool holder ISO 40, DIN 2079 • Universal clamping table (rotatable, tiltable, and swivelable) • Stepless speed adjustment via MITSUBISHI A 700 inverter (converted in 2006 with new control cabinet) • Spindle head with horizontal spindle • Central lubrication • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Nkodpsytumdsfx Ah Row Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes