Used Maho 600 for sale (448)

Year of construction: 1980, condition: reconditioned (used), Universal - swivel - tilting table for MAHO MH 1000 Dujdefx Aipspfx Afpjn clamping surface: 1050 mm x 630 mm The universal - swivel - tilting table is in a good condition !

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Dujdpfsuqmvkex Afpjn Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Djdoxxyd Dspfx Afpeun Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) Dusdsxn Aczjpfx Afpsn - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis Duedpsuw Sd Isfx Afpsn 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros Duedpfx Afoyaam Aopjn • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. Duedpfx Afsx U Tinepen • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information Machine still under power

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 52436, MAHO 500 W2 / CNC Milling Machine * Due to changes in our production sector and manufacturing processes, we are selling a MAHO 500 W2 / CNC milling machine at short notice. * Serial number: 52436 Year of manufacture: 1988 Heidenhain CNC 232 Travel range X- 500 mm, Y- 380 mm, Z-350 mm Spindle taper ISO 40 Quill stroke vertical 50 mm Spindle speeds: 63-4000 rpm, stepless Feed rate X/Z = 1-1000 mm/min Feed rate Y = 1-600 mm/min Rapid traverse X/Z = 4 m/min Rapid traverse Y = 2 m/min Table load capacity 250 kg Total power requirement 11.3 kW Machine weight approx. 2 t * IMPORTANT: For logistical reasons, we are only selling within Europe. The buyer is responsible for removal, loading, and transport of the machine. * "The seller excludes any warranty for the goods sold. The goods are sold as-is, without any guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller accepts no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded." * The machine is in good condition for its age and fully operational. * Inspection and testing under power on site are of course possible. * As of: 09.02.2026 * Price: €2,800 negotiable / plus VAT Dusdpfx Ajyghz Usfpon Prices are net, plus value-added tax * If you have any questions or require further information, please do not hesitate to contact me at any time. *

Condition: ready for operation (used), Year of construction: 2001, operating hours: 32,966 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,534 mm, overall weight: 3,000 kg, product length (max.): 1,783 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2001. It features a manual rotary table with a clamping surface of 700 x 500 mm and a maximum load of 200 kg. The spindle speed reaches up to 9,000 rpm, and the machine includes a tool changer with 16 magazine slots. Dimensions are 1,783 x 1,647 x 2,534 mm, weighing 3,000 kg. Consider the opportunity to buy this DECKEL MAHO DMU 50 T vertical machining centre. Contact us for more information. • Rotation: 360° • Swivel: -10°/+95° • Spindle Speed: 9000 rpm • Power (100%/40%): 9/13 kW • Tool Holder: SK 40 DIN 69871 • Feed Rate X, Y, Z: 10000 mm/min Duedpfx Afjx Uqmdepjn • Rapid Traverse X/Y/Z: 12 m/min • Manual rotary table with swiveling axis • Clamping Surface: 700 x 500 mm • Maximum Load: 200 kg • Slot Spacing/Width: 63 mm / 14 H7 • Magazine Slots: 16 • Maximum Tool Length: 290 mm • Maximum Tool Weight: 6 kg • With electric hand wheel Dimensions Machine Depth 1647 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Coolant: external only; no internal coolant • Notes/condition: Screen may be defective Dodpfx Afex D D Htopoun • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor: not included • Internal coolant: not available (external coolant supply only) Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Dodpfx Aex D Epcofpoun • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Duedpox T Dgnjfx Afpen Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 3,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Additional equipment • Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm • Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total Power Requirement: 17 kVA • No chip conveyor included / No automatic measuring probe included / No tools included Machine Benefits Qualitative Machine Benefits Duodpfox E D U Ajx Afpjn • Low spindle hours and power-on hours. • Never used in series production; operated with care and proper procedures. • Warm-up programs and maintenance routines followed for optimal performance. Technical Machine Benefits • Torque: 57 / 82 nm / rapid traverse (x/y/z): 12 m/min /feed rate: 10000 mm/min • Table clamping surface: 630 x 500 mm • Swivel range: -5 / +110° • Max. Table load: 200 kg • T-slots: 14 h7 / t-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete x-axis bearing overhaul including ball screw and bearing assembly. / various hydraulic components overhauled. / tool changer readjusted and sensor system replaced. • New door switch installed. / new discs installed (with some chip debris affecting them). / new coolant pump installed. / new screen installed. / new handwheel hr410 installed. • Machine is 5-axis machine with 3+2 configuration • The table can swivel to any angle in both the B and C axes. This is accurate to within 0.001 degrees Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1990, operating hours: 30,912 h, This 5-axis DMG DECKEL MAHO MH 800 E2 was manufactured in 1990. It features a semi-cabin splash guard, an adaptable control unit with power unit, an electrical cabinet, a MAHO vertical tool changer, an NC rotary table, and an electric manual control panel. Consider the opportunity to buy this DMG DECKEL MAHO MH 800 E2 universal machining centre. Contact us for more information about this machine. • Splash guard cabin (semi-cabin) Dusdpfjx D Hqzox Afpen • Control with adaptation and power unit, including electrical cabinet • Interface for connecting peripheral devices • MAHO vertical tool changer • NC rotary table • Electric manual control panel • Precision/positioning: • Position tolerance T_P: 0.020 mm • Position uncertainty P_a: 0.015 mm • Reversal span U: 0.005 mm • Position scatter: 0.005 mmAdditional equipment • Damping plates

Condition: excellent (used), Year of construction: 1999, operating hours: 37,300 h, functionality: fully functional, X-travel 500 mm Y-travel 400 mm Z-travel 400 mm Control: Heidenhain TNC Speed range - main spindle 20 - 9,000 rpm Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm Swiveling B: 105° (-10°/+95°) manually Rotatable 360° manually Max. table load 200 kg Number of T-slots: 7 Centering hole 30H7 mm Number of tool positions: 16 positions Tool holder ISO 40 DIN 69871 Max. tool length 290 mm Max. tool weight 6.0 kg Max. total weight 50 kg Max. feed rate 10,000 mm/min Duodpfswm Nqrsx Afpsn Total power requirement 17 kW Machine weight approx. 3.2 t Space requirement approx. 4.0 x 4.0 x 2.5 m

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Dsdpfxjx Uz Apo Afpsun Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg Dusdpfx Afsx Uz Avepjn

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Duedpfx Aswm Rqaofpen Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) Dusdevyr Tdjpfx Afpjn About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: used, MAHO INGERSOLL HANSEN HS 300 E die sinking EDM machine Dsdpfx Ajyghmdofpoun

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. Duodpeydflrofx Afpsn table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling

Condition: used, Year of construction: 2012, x-travel 635 mm Dusdpsx S Rxnefx Afpsn y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Dusdpfx Asx Tulnefpon Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. Dusdpovtnm Hjfx Afpjn I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: ready for operation (used), Year of construction: 2017, Main Drive Number of axis 5 Spindle Speed 15000 RPM Spindle motor power 46 kW Tool taper SK 40 Movement X-Axis Movement 2600 mm Z-Axis Movement 900 mm Y-Axis Movement 1100 mm Control Unit Brand SIEMENS Model 840D sl This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. Application Types Dujdpex D Iclefx Afpon Milling