Used Maho Mh 500 W for sale (438)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 62,469 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine. • Working hours (as of 04.07.2023): • Operating hours: 62,469 h • Spindle hours: 17,307 h • Rotary/Swivel axes: • C-axis indexing: 360° • B-axis indexing: 0–180° • Workpiece: • Max. workpiece diameter: 700 mm Ljdpsydlacefx Adveri • Tool system: • Tool magazine: 32 positions • Coolant system: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: External coolant supply • Rapid traverse (X/Y/Z): 50 m/min Additional equipment • Touch probe: TS 641

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar Lodpfx Adsx U Tinjvjri • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,804 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, table load: 350 kg, overall weight: 3,400 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 90, tool weight: 10,000 g, number of axes: 4, This 4-axis DECKEL MAHO DMC 60H hi-dyn was manufactured in 2000. It features a Siemens Sinumerik 840D control, a spindle speed up to 8000 rpm, and a 90-position tool magazine. The machine includes a pallet changer with 4 storage locations and a rapid traverse rate of 60 m/min. Ideal for high precision horizontal machining. Contact us for more information about this machine. Additional equipment • Coolant Type/Content: Emulsion (internal & external) / approx. 1100L • Coolant Unit: Knoll with drum filter 30, 40, 50 bar via M-command • Machine Accuracy: VDI / DGQ 3441 • Renishaw Measuring Probe Lodpfex D H S Ejx Advori • Tool Breakage Detection • Drum filter • Pallet Sequential Operation • Enclosed Work Area Enclosure • Network Connection • Technical Documents and Layout Plan available Machine Benefits Qualitative Machine Benefits • Some hydraulic and pneumatic hoses replaced • Lt module replaced in the control cabinet • Drum on the knoll system replaced • Regular maintenance performed • High operational efficiency with rapid pallet and tool change times • Comprehensive maintenance records ensuring reliability and accuracy • Equipped with a pallet storage space (4 spaces) • Enhanced safety features with accident prevention regulations compliance Technical Machine Benefits • Torque 100% / 40% duty cycle: 124 nm • Motor power 100% / 40% duty cycle: 13 kw • B-axis (360 x 0. 001°) 60 rpm • Table/pallet size (lxw): 6 pallets 500x400 mm • Table/pallet type: t-slots according to din 55201 • Pallet changer / setup station / storage location: yes / yes / yes (4 storage locations) • Pallet change / tool change time: 6 seconds / 5 seconds • Tool magazine type: chain magazine • Total power requirement: 20 kw • Hydraulic system motor and pump replaced Extra Information Machine still under power Dimensions Machine Depth 5000 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Lrjdpfx Asyk S Hpodvoi Model: DMU 70VL Year of manufacture: 2001

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min Ledoydflrjpfx Advori C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis. Lredpfeywlakjx Advji

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Lrsdpjyq Rpcjfx Advji Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 10356 Spindle Working: 6223 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Lrjdpfxoyq Rm Is Advoi Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. Ledpfx Asym Smbodvori FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. Ljdpfx Adoym Sd Tsvori FCA D-96257 Marktgraitz – loaded onto truck

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Lrodpfx Adsyvzq Nsvei Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A Lrodpfxsym Rk Se Advji - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches Ledpfx Asym Nb Asdvsri - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. Ljdeu Hf Ryjpfx Adveri A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place Lrodpfjw A I Uusx Advji spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: used, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, total height: 1,800 mm, total length: 1,700 mm, total width: 1,300 mm, table width: 380 mm, table height: 285 mm, table length: 625 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, overall weight: 1,700 kg, spindle speed (min.): 40 rpm, spindle motor power: 5,000 W, number of spindles: 1, input voltage: 380 V, type of input current: three-phase, The MAHO MH80 is a robust conventional universal milling machine suitable for use in toolmaking, mechanical engineering, as well as for single-part production and training purposes. The machine is equipped with a swiveling vertical milling head and can also operate in horizontal milling mode, making it versatile for various machining tasks. Its sturdy cast construction ensures high precision and reliability even after many years of operation. The listed price does not include dismantling, packaging, and shipping costs. Sale is ex location, subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded. Ljdpfeyvhbzex Advjri

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Lredjx Dlf Rspfx Advji Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Lredpoym Aucefx Advei Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: ready for operation (used), The machine is ready for operation. Please refer to the video: The machine can be dismantled, loaded, and transported to your location for an additional charge. Basic Specifications Travel paths: X 710 / Y 520 / Z 520 mm Weight: approx. 5,500 kg Tool holder: SK40 or HSK-E50 Tool magazine: 24 positions (optionally 60) Ljdpfx Adjyu Tlzjvori Spindle Standard: 12,000 rpm Option: 30,000 rpm Power: 10–15 kW (standard) / 15–20 kW (option) Axes & Feed Rapid traverse: 30 m/min Feed rate: up to 10,000 mm/min Resolution: 0.001 mm Positioning accuracy: 0.010 mm Tool Data Max. tool length: 315 mm (SK) Max. tool weight: 6 kg Magazine total weight: 80 kg (optionally 180 kg) If you have further questions, please feel free to send a message here, or contact us via WhatsApp or phone. The price is net, no warranty or returns, liability for defects is excluded, subject to prior sale and errors.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders Lrsdsym Rnkjpfx Advoi ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: used, Year of construction: 1994, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, quill stroke: 80 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, workpiece weight (max.): 6 kg, Tool holder: 40 Magazine positions: 20 Machine weight: 3,200 kg Dimensions: Length: 2,740 mm Width: 2,660 mm Lrjdpfx Aoymc T Eodvji Height: 2,140 mm Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and expert installation – all from one source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Lodewglfxepfx Advsri Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. Lrsdpoytruxsfx Advei X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B - axis -30 - +180 ° tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg Lrjdpfx Asyui Ncsdvoi rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale DECKEL MAHO DMU 100 T machining centre – 5 continuous axes: Description: CNC vertical machining centre with 5 simultaneous axes, designed for complex precision parts machining (mould making, aerospace, automotive, etc.). Lrjdpfxeyc Tzls Advsi Technical specifications: - Model: Deckel Maho DMU 100 T - CNC control: Heidenhain iTNC 530 - Axes: X / Y / Z + B rotation + A rotation (simultaneous 5-axis machining) Axis travels: - X-axis: approx. 1050–1150 mm - Y-axis: approx. 710–750 mm - Z-axis: approx. 710 mm Spindle and tooling: - Spindle speed: Up to 18,000 rpm - Spindle power: approx. 28 kW - Tool mounting: SK 40 - Tool magazine: 32 positions Table and capacity: - Type: Integrated NC rotary table - Dimensions: approx. 800 x 800 mm - Max load: 500–800 kg Dimensions and weight: - Machine weight: approx. 9,500–10,000 kg - Dimensions: approx. 3500 x 2500 x 3000 mm (L x W x H) I remain at your disposal for any further information.