Used Maho Mh 500 W for sale (466)

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg Bedpfxjq T T Ndo Abzsww

Condition: used, Year of construction: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm table surface area 940 x 510 mm spindle taper SK 40 spindle turning speed range 32 - 1600 U/min feed - longitudinal/cross 8 - 400 mm/min feeds vertical 4 - 200 mm/min Bjdpfxevzhh Te Abzsww total power requirement 4,5 kW dimensions of machine L x W x H 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant

Condition: good (used), functionality: fully functional, machine/vehicle number: 71452, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, table width: 500 mm, table length: 900 mm, spindle motor power: 8,500 W, The subject of the sale is a Maho MH700P universal milling machine, serial number 71452, with Heidenhain control. The machine is in good technical condition - used since 2006 for minor work for the company's own needs. Over the years, the milling machine has not shown any major problems in use - it is technically efficient and requires inspection and minor repairs at most. Bedpfx Abovwkrtozeww The machine is being sold due to the need to free up space due to the relocation of the company to a new location.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer Bwsdpfxjv Ryams Abzow - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! Bwjdpfxjp S Scho Abzow x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.

Year of construction: 1986, condition: good (used), CNC milling machine MAHO MH 800 E year of construction 1986 half cabin Technical data: X-axis travel 800 mm travel Y-axis 450 mm travel Z-axis 500 mm spindle mounting ISO 40 spindle speed 63 - 3150 rpm rigid angular table 1200 x 620 mm Bedpeig E Thsfx Abzeww feeds X, Y and Z 1 - 1500 mm/min rapid traverse X-axis 4000 mm/min rapid traverse Y-axis 2500 mm/min rapid traverse Z-axis 3000 mm/min drive power 5,5 kW weight approx. 4000 kg outer dimensions approx. 2600 x 2600 x 2200 mm with - Philips 432 screen control - rigid angle table - documents available function untested

Condition: used, CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 Bjdpfx Aboq T T Nhozoww -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 450 mm z-travel 450 mm control PHILIPS CNC 432 table surface area 740 x 440 mm spindle taper SK 40 spindle turning speed range 20 - 5000 U/min feeds 1 - 4000 mm/min rapid traverse 6 m/min quill stroke 80 mm toolpiece magazine: chain magazine 30 Pos tool diameter if 2 vacant positions max. 130 mm tool diametre at full load 100 mm tool length - max. 250 mm weight of tools max. 8 kg total power requirement 15 kVA weight of the machine ca. 3,8 t Accessories: vertical head with hydr. tool clamping and quil retraction, Bodpfotq I Hqox Abzsww univ. table (manual), electron. handwheel, coolant

Condition: used, Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Bwodpfxjv U U S So Abzsw Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: used, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Z-axis: 1,275 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, input current: 44 A, Equipment: documentation/manual, Max. rotating diameter on the bed 700 mm Spindle hole diameter 93 mm Bsdpov S Hk Usfx Abzoww Spindle nose length - tailstock 1,400 mm ASA 8 spindle n.2 speed ranges 2,500 rpm Spindle power 22 kw X-axis useful stroke 320 mm Z-axis useful stroke 1,275 mm 12-position tool turret CNC Philips 432 Complete with SMW AUTOBLOCK 400" self-centering Bezel and tailstock original machine manuals PLC and CNC manuals

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) Bedpfxofgg Aas Abzoww - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C Bwsdpfxoq T T Ntj Abzsw -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Condition: good (used), Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T Bedpfxst Dat Aj Abzoww

Condition: used, Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump -Manufacturer: Vogel, OIL central lubrication pump from CNC milling machine MAHO MH 800C -Type: 122 049 306 -Container content: 2.7 l -Flow rate: 0.1 l/min / 15 bar -Voltage: 110/220V -Dimensions: 240/140/H310 mm Bwodpfx Abeq T T Iyezow -Total weight: 5.7 kg

Condition: good (used), Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Bjdjt Dak Ujpfx Abzjww Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t +++++ Bwsdpjiqu S Eefx Abzjw Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Bwodoxpubrepfx Abzsw Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: good (used), Travel xyz 400 x 300 x 370 mm Angled table inclinable 380 x 700 mm Spindle holder SK 40 rpm 40 - 1.500 Horizontal and vertical spindle Bwodpfxeu T I D Ts Abzow The machine was used very little.

Condition: used, Experience maximum precision and efficiency with the MAHO 600 S machining center, equipped with a powerful automatic tool changer. This CNC-controlled milling center impresses with a maximum spindle speed of 2501 to 3000 rpm, enabling highly dynamic and flexible processing of your workpieces. With overall dimensions of 250 cm in width and height and 300 cm in length, this premium machine integrates seamlessly into your workshop. Manufactured in Germany, the MAHO 600 S machining center is designed for operation with voltages up to 440 V and stands out for its robust construction and durability. The intuitive CNC control system allows for precise and automated processing of your materials, saving both time and labor. Ideal for a wide range of machining tasks – with the Bwodextqrnepfx Abzow

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Bwsdpfoxf Ur Nox Abzjw

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Bedpfx Abexn Rkgjzsww Type: MH1000 Technical Specifications: - Spindle motor: 5.5 kW - 1500 RPM - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm - Slide travel: 750mm - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: used, Year of construction: 1984, travel distance X-axis: 400 mm, travel distance Y-axis: 375 mm, travel distance Z-axis: 250 mm, Maho MH400P Milling Machine Year of manufacture: 1984 The Heidenhain path control is inactive. The machine has been converted to conventional operation – all functions except for the path control work flawlessly. Equipped with SINO digital readout on 3 axes. The spindle runs very smoothly, guides show minimal wear. X travel: 400 mm Y travel: 375 mm Z travel: 250 mm Table size: 205 x 800 mm T-slots: 4 x 45 14 H7 Spindle speeds: 50 – 3150 rpm Tool holder: SK40 Quill stroke: 50 mm Hydraulic tool clamping Hydraulic axis clamping Feeds X + Z axis: 5.0 – 1000 mm/min Feed Y axis: 5.0 – 670 mm/min Rapid traverse: 2.4 / 1.6 m/min Inching feed: 1/100 Central lubrication Spindle drive: 2.2 kW Bwsdpexltwwofx Abzjw Electrical documentation available Weight: 950 kg Dimensions: approx. 1.20 x 2.00 x 1.85 m (LxWxH)

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Bjdpfx Aounwd Tobzoww Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: good (used), Year of construction: 1985, Manufacturer: Maho, model MH400E, year of manufacture: 1985, serial number: 42354, digital readout FROM TRAINING WORKSHOP Bwjdpow Hdv Nofx Abzsw

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Bsdpfx Absurcybezeww Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm with work area enclosure Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .