Used Mais for sale (4,518)

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Prsdpfx Aiszix Ucsroc Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Prodpfezix Uiex Airec Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Julabo Type: FP51-SL (v.2) Julabo recirculating thermostat SL v2 with cooling unit FP51 – heating/cooling thermostat Description: For sale is a professional Julabo recirculating thermostat SL (v2) in combination with the Julabo cooling unit FP51. The device is used for the precise temperature control of liquids and external circuits. It is ideal for laboratory, industrial, and test bench applications. The system enables both heating and active cooling and impresses with stable and accurate temperature control. Pjdpfx Aezizn Sjirjrc Technical data (excerpt): Recirculating thermostat: Julabo SL (v2) Temperature range: approx. +20 °C to +320 °C Mains connection thermostat: 230 V / 50–60 Hz Cooling unit: Julabo FP51 Mains connection cooling: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection class: IP21 Dimensions & weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Prsdpfx Aioyiy Hborec Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) Prodpfezimaajx Airjc (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: Predpfx Aiszixy Ssrsc The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Prsdjzgclmjpfx Airoc Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Prsdpfx Aiezd Rmgsrsc Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee. Prjdpfxjzxrtqs Airsc

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an output conveyor – video of the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company headquarters. Net price: 90,000 PLN Prsdpfezx Sfysx Airjc Net price: 20,930 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, mileage: 2,14,694 km, power: 103 kW (140.04 HP), first registration: 12/2015, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Body/Superstructure: Standard long wheelbase van, * Air conditioning, * Auxiliary heater (hot water) with stationary heating function, * Fuel tank: 80 liters, * High cargo area partition with window, * Windows in the cargo area: - fixed front right, * Rear tailgate with glazing, * Wooden floor, * Cargo area lining, * Workshop equipment on the left & right, Technology: * Electrical package 1, * Electrically adjustable and heated exterior mirrors, * Driver assistance system: Parking assistance system rear, * Audio-navigation system Discover Media, * Mobile online services Car-Net, * Mobile phone interface and WLAN hotspot, * Multifunction display, * 2nd battery, * Inverter, Safety/Environment: * 4x4 drive, * Airbag driver/passenger side, * ABS/ASR, * Driver assistance system: Multi-collision brake, * Suspension: Reinforced suspension and damping, * Trailer stabilization program, * Low emissions according to exhaust standard Euro 5, Other: * German initial delivery, * Engine 2.0 L - 103 kW TDI, * Wheelbase 3400 mm, * Permissible total weight 3.00 t, * COC document available Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremen motorway junction. NutzfahrzeugZentrum Behnke constantly has approximately 200 vehicles from the fields of vans, commercial vehicles, and construction machinery in stock! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Podpe Agqfcsfx Airerc Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: excellent (used), Catalog number: 8120 TECHNICAL DATA - Length of workpiece: 2600mm - Width of workpiece: 800mm - Main motor: 4kW - Width of sanding belt: 160mm Podpez Nhv Iofx Airerc - Fan - 2 types of rotational speeds + clockwise/counterclockwise - Diameter of dust extraction nozzle: 2x120mm - Overall dimensions (L/W/H): 3700x1250x1500mm - Weight: approximately 800kg ADVANTAGES – Polish-made – With fan – DTR documentation – Unpainted – Used sander, very good condition Net price: 5900 PLN Net price: 1372 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm Prsdpfezx Rlxox Airec - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower: 230mm, 7.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Vertical, right: 160mm, 5.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, upper: 230mm, 7.5kW 7) Horizontal, lower: 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feed rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, toothed, rubber, double rollers Prodez Nlc Espfx Airoc From below: - Feed roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - Rollers pneumatically pressed - Length of feed table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed rate adjustment on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of dust extraction port: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approximately 4000kg ADVANTAGES – With 7 heads – Ideal for both wet and dry wood – With ATS – Original DTR documentation + CE – Unpainted – Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7680 Psdjztapijpfx Airerc TECHNICAL SPECIFICATIONS - max. blade diameter 500mm - spindle diameter 30mm - hydraulic blade stroke - max. cutting width 500mm - max. cutting height (in the centre, with a 500mm blade) 160mm - main motor 4kW - table dimensions 715x1070mm - table height from the base 790mm - 2 roller tables - table dimensions: - infeed table length/width 2000x640mm - outfeed table length/width 2000x640mm - machine dimensions length/width/height 1400x940x1070mm - total weight 480kg ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 8116 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm * From top to bottom: - Ratchets - Toothed infeed roller, pulling, helical - Pressure roller - Planing roller - Pressure roller - Smooth outfeed roller, pulling - Motor: approx. 4kW - Manual table lifting - 2 feed speeds: 8/12.5 m/min - Diameter of dust extraction outlet: 130mm - Dimensions (L/W/H): 970x870x1300mm - Weight: 620kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.20 EUR Prsdpfx Aez Nhrioirjc (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), EMERSON COPELAND SCROLL Refrigeration Compressors - ZHB10KU TFD-548 Used - in very good condition We sell and export worldwide. Thanks to our extensive storage capacity, we are able to supply larger quantities quickly and flexibly. Shipping costs depend on weight, volume, and, most importantly, distance. When making an inquiry, please provide the delivery address (postal code and city/town). As further details may need to be discussed, please contact us by phone to inquire about shipping costs and alternative delivery options. Please get in touch with us before making a purchase. Podps Ad Ut Uofx Airjrc We issue intra-Community invoices (VAT-exempt). Opening hours: Mon–Fri: 8:00 AM – 4:00 PM Sat: Closed

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible Prjdpfxozl T R Do Airjc • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: good (used), functionality: fully functional, mileage: 3,04,120 km, power: 100 kW (135.96 HP), first registration: 10/2019, fuel type: gasoline, empty load weight: 2,960 kg, maximum load weight: 540 kg, overall weight: 3,500 kg, tire size: 225/70R15 C 112/110R, axle configuration: 4x2, wheelbase: 4,035 mm, axle spacing: 4,035 mm, next inspection (TÜV): 08/2027, fuel: regular/benzine 91, fuel tank capacity: 50 l, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 8, total length: 6,000 mm, total width: 2,050 mm, total height: 2,520 mm, Year of construction: 2019, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, USB port, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, differential lock, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, seat heater, second fuel tank, sliding door, soot filter, tail-lift, Model: FIAT Ducato First registration: 10/04/2019 Mileage: 304,120 km (original) Engine power: 100 kW Fuel: Methane gas or gasoline Engine displacement: 2,998 cm³ The vehicle can be operated with methane gas (CNG) or gasoline. The methane gas system is currently deactivated, but can be activated upon request! Auxiliary heater Antennas Radio (MP3) Air conditioning Electric windows Electrically adjustable exterior mirrors Multi-function steering wheel Speed limiter Fog lights High beam Hazard warning lights Emission class: EURO6 Wheelbase, axles 1 and 2: 4,035 mm Prodpfe Agfcaex Airec Tire size, axle 1 (front): 225/70R15 C 112/110R Tire size, axle 2 (rear): 225/70R15 C 112/110R Unladen weight: 2,960 kg Payload: 540 kg Permissible total weight: 3,500 kg Vehicle overall dimensions (length x height x width): 600cm x 252cm x 205cm Body dimensions, exterior or interior: (length x height x width): cm x cm x cm The seats are not all matching. Currently, 6 + 2 seats are installed and there is space for wheelchairs (wheelchair lift U-Lift, max. 500 kg). Our vehicles are generally listed with a valid TÜV (German vehicle inspection) and emissions test in the advertisements. These are usually foreign inspection certificates, which are, however, sufficient for the issuance of export license plates. For a valid TÜV and emissions test according to German standards, please consult us individually. You can also contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. We kindly request that you call or send a message via WhatsApp! German: We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Spanish: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Portuguese: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! French: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italian: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Russian: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Arabic: نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! Dari: ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! The price is the final price, VAT not shown. We can transport your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available upon request! We support you with the export process, original data confirmation for country homologation, supplier declaration, preparation of export documents, and production of customs license plates, if required. An inspection and test drive is possible at any time, even on weekends, by prior telephone arrangement! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and equipment of the goods/vehicles. All information is provided without warranty. Changes, prior sale, and errors excepted.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pfaff Creative Icon 2” sewing machine Items for sale: 1x Pfaff Creative Icon 2 with the following accessories: incl. additional embroidery module or embroidery unit Prjdpfoz Sx Ruox Airec incl. ‘Grand Endless Hoop’ fabric or embroidery material incl. embroidery hoop or embroidery accessories Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: Prodpfx Aozx Rqhjirec - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Year of construction: 2025, condition: new, 5 × Robuschi ES105/3.5-P Oil-Free Rotary Lobe Blower Packages – New and Unused Five complete Robuschi blower packages for low-pressure air applications, including aeration in wastewater treatment plants. Equipped with weatherproof stainless steel enclosures and rain hoods, suitable for outdoor installation. Specifications and equipment Quantity: 5 complete packages. Manufacturer: Robuschi / Ingersoll Rand. Model: ES105/3.5-P. Operating principle: oil-free positive displacement blower with three-lobe rotors. Medium: atmospheric air. Electric motor: WEG, 55 kW per package. Power supply: three-phase, 400 V, 50 Hz. Motor: 4-pole, approximately 1,480 rpm. Pjdpfx Aie Afu U Uorerc Efficiency class: IE3. Motor protection: IP55. Insulation class: F. Motor mounting: B3. Belt drive with belts, pulleys and transmission guard. Integrated baseframe with discharge silencer. Inlet filter silencer. Non-return valve and overpressure relief valve. Stainless steel acoustic enclosure with rain hoods and ventilation. Motor heater: 230 V. IFM switch kit. Discharge pressure gauge and vacuum gauge for filter monitoring. Design duty points according to the documentation – per blower 2,150 Nm³/h at 375 mbar gauge pressure. 1,760 Nm³/h at 375 mbar gauge pressure. 1,460 Nm³/h at 570 mbar gauge pressure. 1,205 Nm³/h at 570 mbar gauge pressure. The documentation also includes a selection sheet showing a different operating point. Final capacity and control arrangements should be confirmed for the intended application. Condition and reason for sale The packages were purchased new less than twelve months ago and remain unused in their original packaging. They are now surplus to operational requirements. All five units are stored in their original packaging. Technical documentation available. Images taken from the documentation are for illustration and may differ from the offered configuration.

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm - blade arbor diameter 80mm - shaft diameter 60mm - min blade diameter 250mm - max blade diameter 350mm - max blank width 870mm - min blank length 1500mm from above: - pawls - driving shaft, toothed, metal - pawls - driving shaft, toothed, metal - pressure roller - shaft with blades - 2 driving shafts, metal, pneumatically pressed from below: - guide - metal sliding roller - pawls - track - shaft with blades - track - stepless feed speed adjustment via frequency inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the machine body up/down 0.55kW - electric adjustment of the blade shafts 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm Podpfx Aijzxqvderorc - weight approximately 6500kg - Centering device included - toothed driving rollers 3 pcs - smooth driving rollers 8 pcs - motor 2×1.5kW - pneumatic pressure roller (from above) - side pressure roller - dimensions L/W/H 4850/1100/1800mm - weight approximately 1000kg ADVANTAGES - made in the Czech Republic - twin-shaft - centering device - DTR documentation - year of manufacture 2010 - multi-blade saw, used, very good condition Net price: 262900 PLN Net price: 61140 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, p Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 8 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Prjdpsymf H Uofx Airec Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabric...

Condition: used, functionality: fully functional, mileage: 3,92,790 km, first registration: 07/2017, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, Iveco Eurocargo 120-220 Isothermal body with CARRIER refrigeration unit Dhollondia 15 quintal tail lift Mileage: 392,790 km *Price excludes VAT. Pjdo Afpdkjpfx Airerc WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA DOMENICO ESPOSITO S.P.A. HEAD OFFICE EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer - Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided - V8 - Scania - Frost Edition - Covered - Box - Tail lift - Reefer cell - Insulated with refrigeration unit - Van Domenico Truck srl assumes no responsibility for any discrepancies in technical specifications, options, and characteristics, which may in some cases differ from those stated in the description. We invite you to verify the specifications of the specific vehicle.