Used Maka Stv 71 for sale (44)

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Cedpfx Aevwf I Neptjrg

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Cjdpfsvwfz Njx Aptjrg

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Cjdpfx Apjv Hm Nmstjrg Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1973, Storage location: Nattheim Codpovvkt Uofx Aptsrg

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Cjdpfx Apozwcfzoterg Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, For sale is a robust MAKA/Griggio surface planer, model AH 430. The machine features a robust, heavy-duty design and is suitable for professional use in carpentry, joinery, and woodworking. Technical data / Features: Manufacturer: MAKA/Griggio Model: AH 430 Planing width: 430 mm Year of manufacture: 1994 Motor power: 4.0 kW Connection: 380 V / 50 Hz / 3 phases long infeed and outfeed tables, total length approx. 2,600 mm 4-knife cutterblock CENTROFIX system with reversible knives adjustable fence manual chip thickness adjustment via handwheel dust extraction port motor brake GS-tested for dust emissions massive and robust construction The machine is in used condition, which is good considering its age. The surface planer was used as a training machine in a vocational school and is fully functional. The machine is subject to differential taxation. An inspection and demonstration can be arranged by appointment. Crjdozvu Uxopfx Apteg Transportation is possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. Csdpfszhtpfsx Aptjrg The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. An inspection of the machine is possible at any time; it is currently still in production.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled Crsdszuw Ixepfx Aptsg - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. Codpfszwk Tajx Aptorg 4 pneumatic stops Automatic central lubrication. Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Credpfx Apjtqfqxstsg

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Cedpfx Apevmq Tvetjrg

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Crjdpfszcyq Hjx Aptjg

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Crsdev Rlpyepfx Apteg Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: good (used), Year of construction: 1992, Well-maintained elongated hole drilling machine with the following features: Cjdpfx Apezdcdlotjrg Table can be tilted With center stop With length stop With turret drilling template for series drilling with spacing of 16, 22, 25, 32 mm.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence Cedpezlbpuofx Aptjrg - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2003, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2800 mm Cutting depth: 125 mm Scoring unit: no Saw blade height adjustment: handwheel Csdpfx Apsy A Hi Dotsrg Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3200 / 4000 / 6000 Motor power: 5.5 kW Motor brake: yes / automatic Extraction port: 80 mm and 125 mm Machine length: 3400 mm Machine width: 1800 mm Weight: 820 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Crsdpsv S Diuefx Aptjg Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm Crodpfxjhi Tv Hs Aptjg 5.5 kW engine power 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Can be purchased without advance

Condition: used, Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm Cedpjdwhuqofx Aptjrg -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

Condition: used, Feed unit MAKA -used- Crodpsu R S R Uefx Aptog infinitely variable feed speed ----- Technical data ----- Rollers: 3 pieces

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Crsdpfxogiwl De Aptsg Available immediately

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. Crodozd Dfvopfx Aptsg - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Cjdpey S Hahjfx Aptjrg Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Crsdpfezgtyhox Aptjg Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), Motor power: 2.02 kW Pneumatic tensioners Pneumatic depth adjustment Shoulder length: 220 cm Crodpjh Im S Nofx Aptog Working depth: 16 cm