Used Makino Snc 64 for sale (31)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V Hnsdpfx Aceyvq Drohsr • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm Hnedpfx Acjuzbaysher table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 2,350 mm, total length: 2,500 mm, total width: 2,300 mm, workpiece height (max.): 260 mm, workpiece width (max.): 650 mm, workpiece length (max.): 940 mm, overall weight: 6,000 kg, CNC wire cutting machine in very good condition. It has been thoroughly inspected by a Makino service technician. The machine has been cleaned, and all pumps have been checked, newly mounted, and sealed. Hnedowww Nqspfx Acher

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t Hnjdpovxwygefx Achjr dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC OİMF+, controller model: 2025, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, rotary table diameter: 630 mm, overall weight: 27,000 kg, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool length: 630 mm, tool diameter: 250 mm, MAKINO A88 HORIZONTAL MACHINING CENTER Control System: Fanuc Oi-MF Plus 15" Touchscreen All electronic components, servo motors, and drives were completely replaced with a Fanuc system in 2025. The mechanical components have only 2 years of working time. Specifications: Pallet Size (2): 24.8" x 24.8" (630 mm) X-Axis Travel: 35.4" (900 mm) Y-Axis Travel: 31.5" (800 mm) Z-Axis Travel: 38.2" (970 mm) B-Axis Rotation: Full (360,000°) Spindle Speed: 20 – 12,000 RPM Spindle Taper: HSK100 Spindle Motor: 40 HP Automatic Tool Changer: 60 tools Pallet Changer: 2 Power: 380 V; 3 Phase; 60 Hz Full Load Current: 139.8 Amp Approx. Dimensions: 227" x 144" x 124" Approx. Machine Weight: 27 tons Features: 4th Axis Pallet Indexing Through Spindle Coolant and Air Shower Coolant and Spindle Nozzle Coolant Wash Guns and Pump Spindle Lubrication Unit Hydraulic Unit Chip Conveyor Coolant Tank Fully Enclosed Cutting Area Tool Life Management Rapid Traverse Speed: 50 m/min Z-Axis Dual Ball Screw Hjdpfx Asyy Dhfjchjnr Y-Axis Dual Ball Screw Capable of tool change and operation with 630-size fixtures All maintenance has been completed.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Hjdpfx Acezapp Hshjnr Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: used, Year of construction: 2005, Technical details: size of pallet: 400x400 mm numbers of pallets: 15 table load: 400 kg weight of the machine ca.: 0,060 t dimensions of the machine ca.: 0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale Hnsdpfx Asvc Adljchor *

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts Hnsdpfxevfdvbs Achor *

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Hnodpfsy I Ak Isx Achjr Wire EDM in good condition. *

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Travel ranges (U/V): +/- 101 mm Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg Hnodpszudqyefx Achor The machine was recently in operation at our customer's site and can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2000, A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible. Hodjx Syv Ajpfx Achenr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Technical specification: - horizontal spindle - spindle HSK-A63 - spindle torque 240 Nm - 4 axis machining - ATC 60 tools - pallet changer (2 pallets) Hnsdpfx Aezqyvwecher - pallet size 500x500 mm - coolant chiller - coolant filtration system by Knoll - cooland pressure 50 bar through spindle - control system Fanuc - chips transporter - robot interface - linear measuring systems (scales) - manufactured in year 2014

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: W150474, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 420 mm, workpiece height (max.): 420 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, documentation/manual, The Makino U6 H.E.A.T. is a high-precision wire EDM machine for machining tool steel, hard metal, titanium, Inconel, and other difficult-to-machine materials. It is specifically designed for tool and die making, aerospace, medical technology, and precision manufacturing. Key technical specifications: Travel ranges (X/Y/Z): 650 × 450 × 420 mm U/V axes: ±75 mm Hodpozq Tc Djfx Achsnr Max. workpiece size: 1,000 × 800 × 400 mm Max. workpiece weight: 1,500 kg Available wire diameters: 0.10 / 0.15 / 0.20 / 0.25 / 0.30 mm Work table: 910 × 710 mm (hardened, usable on four sides) Special features of the H.E.A.T. version: *H.E.A.T. (High Energy Applied Technology) for significantly higher cutting speeds under difficult flushing conditions. *Two independent high-performance flushing pumps for higher pressure and better removal of erosion particles. *Four-stage filter system with air vent for easier filter replacement. *Split-V wire guide, which is much more durable than conventional round wire guides and requires less maintenance. *Hyper-i control with 24" touchscreen, mouse, and keyboard, as well as integrated manuals and training videos.

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg Hodpfezg N E Hex Achjnr 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: excellent (used), Year of construction: 2002, Technical specifications: Hnodpezmabxjfx Achor Travel distances (X/Y/Z): 450 / 350 / 350 mm CNC control: MAKINO MGF2 Tool changer Dimensions (length x width x height): approx. 2000 x 1950 x 3050 mm Machine weight: approx. 1.5 tons Condition: very good condition The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1984, functionality: fully functional, We offer this used Makino MC 65 horizontal machining center, year of construction 1984. Type: MC 65 Serial number: 80.4000.0107 Year of manufacture: 1984 Manufacturer: Makino Model: MC65 Year of manufacture: 1984 Control: Fanuc System 6M Technical Specifications Horizontal CNC Machining Center Twin pallet system Pallet size: 500 × 500 mm X-axis travel: 630 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle taper: BT50 / ISO50 Spindle speed: 4,000 rpm Automatic tool changer: 40 positions Fanuc System 6M CNC control Included: Twin pallet system 40-position automatic tool changer BT50 spindle Machine documentation (if available) Hjdpfx Acszivz Tshsnr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Hnsdeyqu I Aepfx Achsr Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,290 mm, overall weight: 3,200 kg, controller manufacturer: MAKINO, controller model: MGF, number of axes: 3, This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Total area: width 3000 mm, y 2800 mm • Power: 12 kva, 400 v, 12 a • Table size: 500 mm x 350 mm • Tool positions: 8 Hnjdpfx Acex U U Husher • Polishing edm is possible with this machine. Extra Information Polishing EDM is possible with this machineFaulty circuit board (machine won't start up) Dimensions Machine Depth 2000 mm

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Hodpfoy D Sirox Achsnr Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, operating hours: 55,569 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 126, controller model: Fanuc 16 MC Professional 3, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Tool interface: HSK-A63 DIN 69893 Tool magazine: 126 positions Tool change time: 1 s Max. tool diameter: 80 mm Max. tool length: 300 mm Distance from spindle nose to table: 150 - 710 mm Distance from table top to spindle center: 80 - 640 mm Pallet size: 400 x 400 mm Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table rotation speed: 5000 rpm Spindle drive: 22 kW Feed rate: max. 40,000 mm/min Rapid traverse rate: 40,000 mm/min MACHINE DETAILS Control system: Fanuc 16 MC Professional 3 Total power consumption: 64 kW Dimensions & Weight Footprint: approx. 9.0 x 3.0 x 2.8 m Machine weight: approx. 15 t Hnodpfx Acezb Ewpjhor Operating hours Spindle hours: 55,569 h Program runtime: 66,600 h Power-on time: 163,411 h

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, wire diameter (max.): 0.3 mm, overall weight: 250 kg, product length (max.): 800 mm, number of axes: 3, wire diameter (min.): 0.1 mm, This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details. • Spindle speed: 150–2000 rpm • Spindle drive power: 0.75 kW (at 100% duty cycle) Hnodpfx Acey Hi T Tshsr • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz • Availability: Not specified

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: Fanuc, controller model: PRO 3, spindle nose: HSKE 63, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, Our machine is located in Plovdiv , Bulgaria. Machine is in working condition. Extremely clean for its age. As machine is big in size , It is dismantled. ATC is disconnected and packed next to machine. IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis Hnodpfsyrdn Iox Achsr *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes Hnsdpfx Acowww Sxshjr

Condition: excellent (used), Hexagonal tower Dimensions 500 x 500 x 500 mm Height 930 mm Base plate 630 x 630 mm Grid 40 mm Hnjdpsyl Swdefx Acher Double angle bracket Dimensions 630 x 200 mm Height 760 mm Base plate 630 x 630 mm Grid 40 mm Square tower Dimensions 400 x 400 mm Height 930 mm Base plate 630 x 630 mm Grid 40 mm

Condition: excellent (used), Base pallets for MAKINO A77/81 Dimensions: 630 x 630 mm with T-slots, slot spacing 125 mm Hedpfx Ajyl Sv Tjchonr Several units available!