Used Mandrel Pipe Bending Machine for sale (84,932)

Condition: ready for operation (used), gebruiksonderdelen: diameter: 180 mm diameter: 260 mm Lhedpex Imm Tjfx Aaner

Condition: used, Year of construction: 1990, pressure ca. 20 t Lhedpfx Aaex E Dt Sjner

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Lhjdpfx Asxpqy Djaner Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Lhodpjuudrkjfx Aanor Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Lhedpfsx Nnm Rex Aansr Tube feed length: 4500 mm Machine weight approx.: 0.11 t Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Lhjdpfjx D Efqex Aanor Application Types Bending

Condition: good (used), Year of construction: 2021, operating hours: 2,789 h, functionality: fully functional, machine/vehicle number: MP_0990, Our good condition salvagnini B3 edge bending machine is for sale. Type: B3.100-3000 Country of origin: Italy Lhsdpfx Aajv Ua Dyonor Weight: 8600 kg Processing range: 3060 mm length Pressing force: 100 tons

Condition: as good as new (ex-display), Year of construction: 2024, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm bending speed 5.3 m/min engine output 2.2 kW weight 1360 kg range L-W-H 2320 x 900 x 1200 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition as NEW Special price on request Lsdpfx Asxaaa Usanjhr Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Lhsdpfx Aasx I Rdiener Handrail: 60x12 mm

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine Ledpfx Aasfg Th Aenehr -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V revolutions per minute: 5 -16 U/min Lhsdjx Adbnopfx Aansr Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: good (used), Year of construction: 2008, Technical Data: Lhsdpjx Nntkofx Aanjr Working width: 1030 mm Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Lhjdpfxsk Iymxe Aaner Machine in Good Condition Undercurrent Demonstratable .

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel Lhsdpfxoxaacve Aanjr - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2024, roller length: 3,000 mm, sheet thickness (max.): 90 mm, sheet thickness steel (max.): 90 mm, sheet thickness aluminum (max.): 90 mm, machine available with special price Lhedpetp Tfnofx Aanjr

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Lsdpfx Asgrzuusanehr -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8" to 3 1/4" -Dimensions: 1020/310/H170 mm -Weight: 28 kg

Condition: excellent (used), Year of construction: 2000, Operating hours: approx. 28,000 Lodpfexzzq Dox Aanshr

Condition: like new (used), Year of construction: 2025, Rebar bending machine B 50 Technical data see data sheet Lsdpfjwr Ub Hex Aanohr Dimensions 1.4x1.3x1.5 meters / Weight 400Kg Errors / input mistakes reserved

Condition: new, Year of construction: 2025, Take advantage of our Try&Buy offer and test the TruBend 7050 from 149.900€* incl. TRUMPF tool package incl. 90 days right of return *Offer only valid for new customers in Germany. The images shown correspond to extended equipment options and not the standard scope of the offer. Please contact us for details of the offer and further information. About the machine: With the TruBend Series 7000, you can bend small and medium-sized parts highly productively under the best working conditions. Winner of the Ergonomics Award, it takes the strain off your operator while working quickly and safely. You achieve energy savings of up to 74% compared to conventional hydraulic drives and achieve precise results for all applications. See the perfect interaction between man and machine for yourself! Precise and intuitive Control, tool clamping, positioning and angle measurement - every work step supports the path to the perfect result. User-friendly handling and precise design make the machine a compact high performer in your production. Consistently ergonomic If the bender is comfortable, the bending process runs smoothly: the TruBend Series 7000 was the first bending machine to receive an ergonomics certificate. The operator works comfortably with a standing and sitting aid and adjusts the support table individually. The sitting and standing aid as well as the swivel-mounted control protect the spine. LED lighting guarantees optimum visibility in the work area. Further information can be found on our website. TRUMPF quality Our fast remote service support takes care of your concerns anywhere in the world. Ljdpei Ubhxefx Aanehr For further technical data, please refer to the data sheet or visit our website. If you have any questions, please contact us. About TRUMPF: In our 100-year company history, we have been able to help shape many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market and experts in software, automation and Smart Factory, you will always receive an individual offer that is tailored to your requirements and makes you fit for the future. PS: We are also happy to support you when it comes to financing. With the financing, leasing or pay-per-use models of TRUMPF Financial Services, we are at your side for both financial and business challenges.

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Lhsdpex I Rq Aofx Aaner

Condition: good (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 874015, Profile bending machine Roundo R3 Lsdex Hw Eqepfx Aanehr

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm Lhjdecn Shuepfx Aanjr -Weight: 10 kg

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm Ljdpsx I Afxefx Aanshr - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 Lsdpfx Aoip Eqreanohr -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg Lhodsip Eqkopfx Aaner