Used Manometer for sale (153)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Fjdpfx Asxabpweddsgk Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by agreement! 54 m³ Kempf grain tipping semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: – (NEW) * Capacity: approx. 54 m³ (10.00 m long x 2.43 m wide x 2.20 m high) * Gross weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift/lower function / rapid discharge * EBS Wabco * Kempf 400 high-performance steel sluice, throughput capacity 30–40 m³/h * 2 partition walls with 3 locking positions, sliding in overhead rails * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right (hoses not included) * Combination door (swing + double-wing door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Doors 1/3 to 2/3 division * 1x grain shutter with funnel/dust sack * Fifth wheel height from 1,170 mm to 1,230 mm * 1x approx. 4.00 m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box, rear right * Single wheel mudguards * Drop legs, aluminium * Operator platform at the front * Sliding tarpaulin with central locking * 3x tarpaulin support bows * Load manometer * Shovel and broom holder * Dual round LED three-chamber tail lights * 1x LED work light, left * 1x LED work light, right * 1x LED interior lighting with switch * Body finished in RAL 9007 grey aluminum, chassis RAL 9005, tarpaulin colour dust grey * Air tanks made of aluminum * 4 m aluminium ladder * Tyre pressure monitoring system * Access steps inside front bulkhead * Floor, 6 mm New vehicle! Rental option also available! Fgsdpfxjwuyx As Addek

Condition: excellent (used), Year of construction: 2015, pressure: 450 bar, 5.000 liter per hour - 450 bar - High Pressure homogenizer Fjdpfx Aoxnl Exoddegk High pressure homogenizer. 2 stages with pneumatic pressure control. 3 Ceramic pistons, piston diameter: 55 mm and stroke: 100 mm. Stainless steel cladded with sound reducing material. Connections: 2 x 3" Din. Current motor power: 132 kW and maximum pressure in current configuration with this motor 450 bar. Freestanding control panel with Siemens Simatic ET 200SP controls. Small control box on machine with Siemens Simatic ET 200SP controls. With overpressure valve (set on 540 bar). Manometer on 1st and 2nd stage. Electronic pressure transmitter on in- and outlet. Flowswitch on cooling water. Pulsation damper on inlet. Remote pressure control. With spare pulsation damper and overpressure valve. Documentation: operational manual, electrical diagram, parts list and service report. Dimensions control panel: 80x40x187 (lxwxh) cm.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Used multiprocess MIG/MAG welding machine EWM Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Fedpfxowgy Eyj Addogk Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A Price Euro 7.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Equipment: ABS, TECNOKAR SUPERTOP F1 6900 - AXLES: Single axle 9 tons, twin axles 12 tons. R22.5 - AXLE CONFIGURATION: 1st axle liftable and self-steering, 2nd and 3rd fixed - VOLUME: 28 m³ - BODY STRUCTURE MATERIAL: Standard in DOMEX - FLOOR PLATE MATERIAL: Wear-resistant steel, hardness HB 450 - FLOOR PLATE THICKNESS: 6 mm - SIDE PANEL MATERIAL: Wear-resistant steel, hardness HB 450 - SIDE PANEL THICKNESS: 4 mm - REAR: High yield strength steel - TYPE OF REAR DOOR: Hinged with gasket and locking rods, full hydraulic opening Fsdpfxovzh Ugj Addegk - REAR DOOR VERSION: Recessed into the body - HYDRAULIC OPENING VERSION: With exposed arms and protective wedges - REAR DOOR LOCKING: With side hooks, hydraulic - DOUBLE ANTI-JAM HINGE SYSTEM: Yes - SEALING TYPE: With gasket on the body and 5 locking turnbuckles - REAR OVERHANG: With extension for screed flush with the floor - SHAPED SADDLE: No - TYPE OF COVER: Cramaro - COVER HEIGHT: 400 mm Standard Equipment and Accessories: - MANUAL LOCKING FOR STEERING AXLE - REVERSE BUZZER - SPEED LIMITER DISCS - ECOLED II LED REAR LIGHTS - MANOMETER FOR PRESSURE AND THEREFORE PAYLOAD READING - PAIR OF REAR TOW EYES - MANUALLY REVERSIBLE BUMPER WITH ROUND UNDER-RUN BAR - FAST UNLOADING SYSTEM - ANTI-VIBRATION RUBBER BUFFERS - TPMS TIRE PRESSURE MONITORING SYSTEM - SAF OSCILLATING RETRACTABLE LANDING GEARS - SINGLE REMOTE CONTROL FOR ELECTRIC COVER AND VIBRATOR - UNDERBODY VIBRATOR - 10x 9.00 R 22.5 ALCOA DURA BRIGHT ULTRA ONE ALLOY WHEELS - 10x CONTINENTAL 315/80 R 22.5 TIRES POSSIBILITY OF TAILORED FINANCING OR LEASING AT OUR PREMISES. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 AM – 7:00 PM / SATURDAY 8:30 AM – 2:00 PM WE OFFER A HUGE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet – Schmitz Isuzu - Flatbed – Crane – Tipper – 4 axles – 4 Rear Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Three-way – V8 – Scania – Frost Edition Curtain-sided – Box – Side Loader – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility for any discrepancies in equipment, options, and features which may in some cases differ from what is described. Please verify the specifications of the specific vehicle.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Fsdpfx Adow Ewafodjgk Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm Fjdoxaa Tbepfx Addjgk capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device Fgsdpfx Aemhm Aqsddsk - Tape tension control via manometer - Electr. automatic cooling

Condition: excellent (used), functionality: fully functional, Schenk plate filter L: 1600 mm B: 650 mm H: 900 mm Plates: 40x40 Fedpfxswn D Are Addegk Rack length for 60 plates. Mobile version with steering column and wheels. New Bourdon tube manometer equipped with 39 plastic filter plates and 2 plastic end plates. Product valve connections.

Condition: good (used), Year of construction: 2023, functionality: fully functional, Used multiprocess MIG/MAG welding machine Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Fsdowktz Aspfx Addegk Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A We have 2 identical complete pieces available in stock. Price Euro 6.000 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPER BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR - DRUM ETO - AXLE CONFIGURATION: 1 STEERING AXLE + 2 FIXED AXLES - DISC BRAKES - BRAKING SYSTEM: KNORR, 2 SENSORS / 2 CHANNELS, LIFTING 1 AXLE - WHEELBASE: 1310 mm - STANDARD LANDING LEGS - CHASSIS COLOR: MENCI METALLIC GRAY - MANUAL UNDER-RUN BAR - PENTA HYDRAULIC CYLINDER - BODY TYPE: ROUND - BODY MATERIAL: STEEL - BODY LENGTH: 7450 mm - BODY HEIGHT: 1840 mm - REAR DOOR: TYPE B, 20-DEGREE INCLINE - BODY CAPACITY: 30m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE WALL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - DOOR THICKNESS: 4 mm HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG RELEASE - 2 SAFETY LOCKS BODY COLOR: IVECO WHITE IC194 Fgjdpfovzh T Nsx Addsk SIDE STRIPES COLOR: BLUE RAL 5010 DOOR WITHOUT SEAL TMPS BRAND: KNORR REAR LIGHTS: EUROPOINT III - N. 10 SPEEDLINE DISCS 22.5 x 9.00, BOLT HOLE D. 26 - N. 10 TYRES: GY 315/80R22.5KMAXSG2 VIBRATOR PRE-SETTING STAINLESS STEEL TOOLBOX 400x300x450 mm STANDARD MANOMETER 2 TOW HOOKS RAPID DUMP WITH BUTTON CRAMARO ELECTRIC SHEET SYSTEM, TYPE C REMOTE-CONTROLLED SHEET SYSTEM: YES COLOR: BLUE RAL5010 BOW HEIGHT: 500 mm ROLLER HOOKS POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY: 8:30/19:00 SATURDAY: 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tip-Trailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 axle – Rear 4 Axle – Tway-T-Way-540- 460 HP – Xway-X-Way– Three-Way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Loader Sideboard – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical equipment, optional features, or specifications which may, in some cases, differ from those described. Please verify the features of the specific vehicle.

Condition: new, Year of construction: 2024, * manual cutting cycle Fgodpeftmxvsfx Addek * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW Fgedpfx Adjxaa H Iedek weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 315 mm dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer Fedpfxewfyq Ts Addegk - Electr. automatic cooling

Condition: new, Blasting cabinet Make: STK Model: PK-690L Condition: New machine Accessories: - Interior lighting - Suction with filtering - Pressure reducing valve with manometer Fgjdpfxs R Thtj Addsk - Pair of gloves - Blasting gun with nozzle - foot switch - Instruction manual

Year of construction: 2005, condition: excellent (used), functionality: fully functional, empty load weight: 63 kg, maximum load weight: 300 kg, machine/vehicle number: 2441, Mobile tank, entirely made of stainless steel, Eurocont brand, year of manufacture 2005, impeccable technical and optical condition, gaskets in excellent condition, Series: 2441, weight 63 kg, operating pressure allowed: 1 bar; tested pressure 1.7 bar; negative operating pressure allowed: -0.15 bar, maximum operating temperature allowed + 130°C, this tank can work under pressure if a manometer is installed. Mobile stainless steel tank for various food and non-food liquids. volume 300 liters, diameter 800 mm, height 1,140 mm. The tank is on four rollers with blockers. It has 3 upper loading sockets: 100 DN with valve, 50DN and 20DN socket and lower DN 100 discharge/empty socket with closing lever and threaded cap. Fgsdpfotctmxex Addjk Sales price: 2.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Manometer, test manometer, saw tension gauge Fsdpsw Adkrsfx Addjgk -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering Fedpfxsxaarko Addegk * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer 1 hose 4 meter lenght 4 system are with high pressure spray gun 2 system have no high pressure spray gun Fgedpetu Enqefx Addek The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: used, Pressure fitting, pressure clock, pressure indicator, manometer -Manometer: for oil filters -Measuring range: 2.5 bar -Faucet: Ø 45 mm -Thread: mm -Number: 20x fittings available Fodpec Nnarefx Addogk -Price: per piece -Weight: 0.055 kg

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) Fjdsxaaqtopfx Addegk - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: used, Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 25 bar -Outlet pressure: 0-1.5 bar adjustable -Number: 1x reducer available -Price: per piece Fgjdpfxjb Sc Sue Addsk -Weight: 1.3 kg/piece

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force Fjdpfsxaapcsx Addegk - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: used, Pressure reducers, pressure regulators, manometers -for forming gas Fedob Uhuwopfx Addjgk -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

Condition: used, Pressure reducers, pressure regulators, manometers -for nitrogen Fgjdpsb Uhuxsfx Addek -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece