Used Hydraulic Workshop Press for sale (27,471)

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Rcsdpedzp Trsfx Agueb Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Year of construction: 1992, Technical details: voltage: 400/50 V/Hz air-pressure connection: 7 bar control: - pressure capacity max.: 340-375 t total power requirement: 15 kW weight of the machine approx.: 1,4 kg dimensions of machine: 1,4 x 0,8 x 1,6 m Rodpsxv Awzjfx Aguscb Hose and crimp press · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force ? suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology longer service life, less contamination on workpieces. Working range: All hoses up to 6SP (SAE 100R 13–14) and crimp fittings up to DN 125 or I.D. 5 Crimping range: from Ø 9 to Ø 180 mm Crimping tool: Double-wedge system (domestic and international patents) Maximum crimp stroke: Ø 20 mm Maximum adjustment range: Ø 10 mm Number of crimping programs: 3 *

Condition: used, Year of construction: 1992, Technical details: control: - Hose and crimp press · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force ? suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology longer service life, less contamination on workpieces. Working range: All hoses up to 6SP (SAE 100R 13–14) and crimp fittings up to DN 125 or I.D. 5 Rcsdpfxoy N R Hmo Agusb Crimping range: from Ø 9 to Ø 180 mm Crimping tool: Double-wedge system (domestic and international patents) Maximum crimp stroke: Ø 20 mm Maximum adjustment range: Ø 10 mm Number of crimping programs: 3 *

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Rsdpfx Agoi Amnpsujcb Location: Ex works - available at short notice -

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Rodpfef Sqcyox Aguecb Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: new, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Manual Pump Rcodpfsf Sqckjx Aguob The TIGERMETAL WH150 workshop press is a powerful industrial press designed for the most demanding applications in workshops, production, and maintenance. With a pressing force of 150 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows both fast operation and highly sensitive, precise pressure control – especially for delicate workpieces. 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + manual pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Working width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The WH150 is the ideal solution for anyone looking to combine maximum pressing power with the highest level of precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to a wide variety of workpieces. The massive steel construction guarantees maximum stability, safety, and a long service life – even under intensive industrial use. Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. A wide range of additional workshop presses in various designs, sizes, and with optional equipment is available! Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rcjdpfxsw N Su Dj Agusb Lukas van Rossum

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread Redpfowki Apox Aguecb - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, pressing force: 150 t, overall weight: 1,400 kg, Equipment: CE marking, We are offering this quality Sahinler 1020-150 workshop press, hydraulic press, 150 tons, year of manufacture 2012. - Adjustment of closing stroke with fine tuning - Table height adjustable - Automatic pressure cut-off at set pressure - Separate 2-hand control panel - Table plate with T-slots for T-nuts - Ram plate with slots - 2 machine guide columns for the upper ram plate Fully functional The machine can be demonstrated on site Rodpfx Asyzl Amsguecb Hardly used, only for prototype production Single owner Dimensions as per data sheet Loading on site possible. Weight approx. 1.4 t Original price approx. €21,000 net No warranty or guarantee If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Rsdpfx Aok Nz Ntsgujcb Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: new, Technical data: Capacity: 100 t Rsdpfjk Nz N Esx Agujcb Installation height: 1010 mm Max. working area: 1010 x 300 mm Piston stroke: 400 mm Advance speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Side-shifting cylinder - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: new, Technical Data: Capacity: 60 t Installation height: 820 mm Max. working area: 820 x 300 mm Piston stroke: 400 mm Advance speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Rodpjk Nz Ndofx Aguocb Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Laterally movable cylinder - Generously sized working area - Height-adjustable table - Torsion-resistant design made from welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: new, Technical Specifications: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Rcedopl T Diopfx Agueb Equipment features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Generously dimensioned working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Your benefits: - Among the heaviest-duty models on the market - Available in capacities up to 500 tons - Maximum performance and stability - Various table widths available upon request - Horizontally freely positionable hydraulic cylinder with handwheel, rack, and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge Rjdsp Dt Uuopfx Aguocb - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: used, pressure:120 t stroke:400 mm table surface area:1750 x 500 mm press capacity:120 t Rcedpet Hmldsfx Agueb working width:1740 mm total power requirement:3,0 kW weight of the machine ca.:2 t dimensions of the machine ca.:2 x 1,0 x 1,5 m

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), pressing force: 25 t, stroke length: 480 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, table width: 780 mm, table length: 200 mm, oil tank capacity: 20 l, total length: 10,400 mm, total width: 7,800 mm, total height: 23,000 mm, operating pressure: 230 bar, MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros Rjdpfet A Dznjx Aguocb The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Redpfxstndu Uo Aguscb CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions Rcedpfx Aecmat Uegusb

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Rcsdpfx Agju Axfcousb Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 1204197, functionality: fully functional, pressing force: 125 t, stroke length: 120 mm, table width: 700 mm, table length: 1,100 mm, hole diameter: 52 mm, ram adjustment: 100 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Press force: 1,250 kN Speed range: 30 - 250 rpm Ram stroke: 8 - 120 mm Ram adjustment: 0 - 100 mm Ram bore diameter: 52 mm Table dimensions: 1,100 x 700 mm Rjdpfx Asy D Nnlogujcb MACHINE DETAILS Controller manufacturer: UNIDOR Drive power: 35 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 2,400 x 3,300 mm Machine weight: 12,000 kg EQUIPMENT Decoiler, diameter approx. 1,200 mm Workshop drawer cabinet with clamping devices External reference: 68

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Rcjdpfx Agjy Uiyvouob Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, stroke length: 250 mm, table width: 1,000 mm, table length: 800 mm, 2000 tons hydraulic press 4-columns Table 800x1000 mm Rcsdpfxsy Sz Rhj Agusb Stroke 250 mm

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, pressing force: 80 t, stroke length: 400 mm, table width: 750 mm, table length: 600 mm, Omera hydraulic press model OPI-80C Rodpfx Agoy Sz I Houocb Capacity 80 tons Table 700x600 mm Stroke 400 mm

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Rcedpfxey Szwno Agueb Capacity 400 tons Table 700x1000 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, stroke length: 650 mm, table width: 800 mm, table length: 800 mm, Equipment: documentation/manual, LCM Taiwan, 250 tons hydraulic press Rcsdpfey Szvwox Aguob New in 2014 Table 800x800 mm Stroke 0-650 adjustable