Used Table Lathe for sale (52,080)

Condition: used, LATHE FOR TABLE LEGS GENINI MOG. G300 - Max.turning diam. 300 mm. - Max. Turning lenght mm. 800 - N. 4 carriages Dodpfjmzbp Esx Adksku

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2 Dkjdpfx Asw Imhvsdkou

Condition: good (used), Year of construction: 1983, Turning length 3000 mm Turning knife above bed 800 mm Djdpfxewlchze Adksku

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Dsdpfx Adjxf Uxcoksku

Condition: used, Year of construction: 2009, SECOND-HAND MANUAL LATHE LANDONIO MOD. TLR - SUITABLE FOR MOULDERS AND SAMPLES - Year 2009 Dsdpfx Adewr Ukzekjku

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Djdpfsu Axzksx Adkoku Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Dodpoiv Irlefx Adkoku Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. Dkodpfx Adexdmgvsksu It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Outfeed table before resaw IDL000793 Dkjdpfx Asul Rgvedkou

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Dkjdpfx Adsvkt N Ueksu Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Dkedsfvqmxepfx Adkou Hydraulic

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Dkjdpfx Asvuk Uijdkou

Condition: ready for operation (used), functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. Dsdpfswbdmkox Adkeku With Machine 4 collets. More collets is possible to buy, ~25EUR/pc.

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. Dksdpstpgxijfx Adkju This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Diamter: 120 cm

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Dedsu Smq Sopfx Adkjku - log infeed conveyor

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Dsdpfx Adjwhylvskeku Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Dkedpfxstddw Aj Adkeu - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, 630x4000 Djdpfx Adjcncghekjku Under power.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16220C164110, MACHINE DETAILS Dodpfsxfaxbjx Adkeku Operating voltage: 400 V Power: 98 kVA Rated current: 198 A Three-phase current: 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle bore: 62 mm, turning length: 2,340 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, controller model: SIEMENS SIN 810 D, TECHNICAL DETAILS Turning diameter: 570 mm Turning length: 2,340 mm Turning diameter over support: 345 mm Spindle head according to DIN 55027: Size 8 Spindle bore: 62 mm Tailstock quill taper: MK 5 Spindle speeds: 3 - 2,500 rpm MACHINE DETAILS Control: SIN 810 D Dkjdpfx Aoxf Dk Uedkeu Total power requirement: 35 kW Dimensions & Weight Dimensions: approx. 4.85 x 2.10 x 2.00 m Machine weight: approx. 5.60 t EQUIPMENT extended machine bed steady rest chip tray cooling system 4-jaw chuck

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, faceplate diameter: 4,000 mm, travel distance X-axis: 4,500 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D-sl, clamping range: 8,000 mm, year of last overhaul: 2010, No minimum price – guaranteed sale to the highest bidder! The machine was originally built in 1985 and was completely overhauled in 2010! TECHNICAL DETAILS Travel distance X-axis: 4,500 mm Travel distance Z-axis: 600 mm Faceplate diameter: 4,000 mm Clamping range: 0 – 8,000 mm/min Spindle speeds Stage 1: 0.7 – 5.6 rpm Stage 2: 2.8 – 22.4 rpm Stage 3: 2.1 – 56 rpm MACHINE DETAILS Dkedjxfic Aepfx Adksu Measuring system X-axis: Absolute encoder Z-axis: Absolute encoder C-axis: ROD – 280 Heidenhain 1PH6206 75 kW Drives Drive X: Servo motor 1FT6086 Drive Z: Servo motor 1FT6086 Control unit: Siemens Sinumerik 840D-sl Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Main fuse: 250 A Total power consumption: 120 kW Total rated current: 200 A EQUIPMENT Chip conveyor Hydraulic unit

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Dodpfx Adoxlfu Ueksku Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Dksdpoxf Apvsfx Adksu Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m Dkodpfx Ajxf An Ssdkou EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Dedpexf A Npjfx Adkeku Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper