Used Marking Devices for sale (15,742)

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features Ljdpfxexaavce Apdoag - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, power capacity 0,75 kW degree 45° Grad turning speeds 10.000 U/min milling height 4,0 mm motor 400 Volt range L-W-H 560 x 300 x 450 mm weight 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work Lsdpfx Asxab H Nopdsag scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : Ljdpfx Apsxab Imedsag - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros Ledpfxoxab Iyo Apdsag

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l Lasdexab Itopfx Apdog available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: used, Vacuum lifting device, vacuum lifter RIVATEC UNIGRIPPER Custom-made as a handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction pads Ø 32 mm (design allows for 12) - 16 suction pads Ø 42 mm (design allows for 20) - 5 suction pads Ø 60 mm (design allows for 6) Ledewywipjpfx Apdoag - a few suction cups missing, see photos (bellows suction pads) - swiveling base body for suction surface at 90° angle or flat 180° - base body pneumatically swiveling - Very elaborate and precise construction with linear guides - Flange plate for suspension or attachment to the robot - Equipped with many Festo components Required space (L x W x H): 620 x 300 x 300 mm Net weight: 28 kg Good condition 2 units available, price indicated per unit

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a professional PIOVAN DPM605 dryer/desiccant dryer for plastics processing. Technical data: * Manufacturer: PIOVAN * Type: DPM605 * Year of manufacture: 2019 * E.D.: 960D06E * Serial No.: EQ.8000005815 * Model: DPM6050504 * 400 V / 3 phases / 50 Hz * Connected load: 6.0 kW * Imax: 9.5 A * Weight: approx. 250 kg * Dry air output for DPM605: approx. 75 m³/h Laodpez Dwunofx Apdsg * Double desiccant tower * Microprocessor control with display * Mobile industrial version Condition: used - fully functional The PIOVAN DPM605 is designed for dehumidifying or drying plastic granules before processing. The DPM series operates with desiccant and achieves a very low dew point, depending on the model.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Used equipment – in very good condition Kugelmann Articulating snowplow blade Type: B140/67 Blade height (H): 67cm Blade width (W): 140cm Clearing width at maximum inclination (W2): approx. 123cm Year of manufacture: 2020 Laodpfx Apozdt Nwsdjg Price upon request Subject to changes, typing errors, mistakes and prior sale. All information is provided without warranty. The sale is made with the exclusion of any warranty or guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Lasdpfxezf E Dve Apdeg Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. Laedozf E Hqspfx Apdeg - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), Various pilot drilling tools available. (Image is similar) Ledpfx Apsdy Anksdsag Data and price: available upon request! We would be happy to prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: excellent (used), Feeder with centering device for multi-blade saw. Power supply: 380/400V Pneumatic Automatic Laodjz Afkkopfx Apdjg

Condition: ready for operation (used), Taylor Hobson Form Talysurf PGI 820 Measuring Instrument Measuring range: 8mm Resolution: 3.2mm Ljdpfx Apjz Dtttodoag Motorized column: 450mm Feed unit: 200mm Roughness calculation Waviness calculation Contour measurement Accessories: Stylus Calibration standard Witte cross slide table Base table PC & software You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Second-hand mobile extraction unit Ledozk N H Eopfx Apdeag Suction nozzle diameter 140 mm Motor: 1.5 kW – 400 V with steel impeller Availability: at short notice Storage location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: mobile extraction unit with filter bag at the top Extraction connection: 140 mm Lodpfx Aezk Nmlopdsag Motor: 1.1 kW, 400 V Availability: at short notice Location: Flörsheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, overall weight: 428 kg, load capacity: 4,000 kg, DGUV certified until: 08/2027, Seith 40.55 rotating device with the following specifications: Load capacity: 4,000 kg Load center of gravity: 500 mm Lodpezhhcyofx Apdjag Mounting: FEM IIIA Overall width: 1,100 mm Year of manufacture: 2015 Weight: 428 kg Center of gravity: 95 mm Overhang: 210 mm Net price ex works, excluding forks (Price for forks available upon request) Inspection and demonstration are available by appointment. Sale is exclusively to commercial customers; subject to prior sale, errors and omissions excepted. Transportation costs available upon request. Further information and offers can be found on our newly designed website.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt Lasdpsd N Hguefx Apdog - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm Lasdswav R Sjpfx Apdjg overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Macsa id K series CO2 laser coding and marking equipment. Ledpfx Aoxf Dmvopdoag Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg IP54 Macsa id TSL-Plus multifunction touch panel Manufacturer: Macsa id Type: TOUCH SCREEN 10.1-M_ICON-2

Condition: new, functionality: fully functional, New unit Enmair Electropneumatic core puller ER Immediately available from stock ER series, Type 650 Application range from 5 to up to 150 to (depending on the design) – injection molding machine Horizontal travel: 650 mm Vertical travel: 125 mm Swivel angle: 5 degrees Gripper angle: [value missing in original text] Lifting weight: approx. 3 kg Laedper A D Itefx Apdsg A bracket on the rear allows for easy adjustment of the swivel angle to the right or left, as needed. Required operating air pressure: 5 - 7 bar 220 V, 50 Hz Depending on the pre-existing equipment on the injection molding machine, the unit can be offered with an Euromap 12 or Euromap 67 connector. Operating interface: English, Dutch

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: gasoline, operating hours: 2,284 h, Road marking machine: + Graco + Airless pump: Airlessco Durotech + Marking spray gun, right-hand side + Hand spray gun with hose + Honda GVX340K gasoline engine, 337cc, 11 hp + hydrostatic drive + Honda 3011 chassis from 1992 with 2,284 operating hours Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and misprints excepted; subject to prior sale! Lasdpfx Apsz Dgwledsg

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Laodezym Nispfx Apdjg Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Robust industrial design The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: Lajdjxf Urpopfx Apdeg 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Ledpswhzg Uofx Apdoag

Condition: used, Technical details: height: 1600 mm width: 1270 mm depth: 1000 mm Ledpou N Ea Hjfx Apdoag 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm *