Used Masturn 50 Cnc for sale (40,771)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Boschert TRI 1500 CNC Z Rota Revo Tool quick-change system TRUMPF Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Nodpoz R Da Ssfx Airown Station 2 Trumpf system tool - size 3 (105 mm) freely rotatable and indexable Station 3 Trumpf system tool/Boschert Revotool - size 3 (105 mm) Station 4 Engraving head incl. Revotool 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) y- 1580 mm Punch arm outreach: 1730 mm Tool system Trumpf size 1-3 (105 mm) Labod 32050 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90/45 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball rollers in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture 2002 Well-maintained condition - currently being overhauled Available from mid-November 2026 with a large amount of accessories

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Nwedpfjq U R T Nox Airen Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: ready for operation (used), Year of construction: 2006, number of axes: 3, pressing force: 82 t, This 3-axis FERMAT CTOF 80/2500 CNC was manufactured in 2006. It features a press force of 80 tons and a maximum bending length of 2500 mm. If you are looking to get high-quality bending capabilities, consider the FERMAT CTOF 80/2500 CNC press brake we have for sale. Contact us for further details. Nwsdpfx Aisz Srkbsren Technical Specification Bending Length 2500 mm

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 1,60,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Nwedexqfk Tspfx Airon Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: Famar N 20 5, Can be inspected in Poland Nwodpfx Aexb Avbsirsn

Condition: used, Year of construction: 1984, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Rotary table Skoda E20 Nsdeb Hv Twopfx Airjwn

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle Nsdpjxwl N Aofx Airewn - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter 850 mm turning length 2200 mm Nodpfsyhrb Uox Airown control Siemens 840 D

Condition: excellent (used), Year of construction: 2016, Machining center Make KNUTH Nedpstiauhofx Airjwn Type EcoMill 350 CNC

Condition: like new (used), Year of construction: 2001, Technical data: Nodjza D U Dspfx Airown Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, MORI SEIKI HORIZONTAL CNC LATHE Model : NL2500Y/700 Year 2006 Max Swing Over Bed 925 mm Max Turning Diameter 356 mm Max Turning Length 705 mm Distance Between Centers 700 mm Bar Working Capacity 80 mm Standard Chuck Size 10” • X-Axis Travel: 260 mm • Z-Axis Travel: 795 mm • Y-Axis Travel: 100 mm / ± 50 mm • C-Axis Minimum Indexing: 0.001° • Main Spindle Speed: Max 4,000 RPM • Turret Stations: 12-position bolt-on type BMT turret • Live Tooling Speed: Max 6,000 RPM • Live Tooling Motor: 7.5 hp (5.5 kW) Nwjdpfxs Ad Ubxo Airen • CNC Control Unit: MSX-850 / MSX-850III (MAPPS III) • Tailstock

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Very compact punching and nibbling machine Suitable even for limited space Boschert EL500CNC Z TRUMPF rapid tool change system Punching force: 280 kN (28 tons) Travel distances x- 1000 mm (repositioning up to 9999 mm) y- 580 mm Punching arm overhang: 730 mm Trumpf Gr1-3 (105mm) tool system Labod 32040 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching slug extraction Table width left + right: 1100 mm each Table depth: 810 mm Table height: 900 mm Overall width: 2582 mm Nedpfx Aishr A Nvsrewn Overall depth: 2800 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 8,300 kg Hydraulic oil capacity: 80 l Color: Reseda green RAL6011/Light gray RAL7035 Machine year of manufacture: 2003 Very well-maintained condition with a lot of accessories Tool cabinet

Year of construction: 1991, condition: ready for operation (used), A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible. Nedpfx Asy Hk Tzjirewn

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: Nwedpfovkc D Iox Airsn - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: used, Year of construction: 2014, operating hours: 460 h, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Nwsdezxgvmopfx Airsn Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 1,60,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Nwjdpfx Aijx Rw E Sjrsn Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: used, Year of construction: 2005, functionality: unexamined, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used slant-bed lathe, manufactured in 2005 by Trens in Slovakia (Type SBL 500 CNC). It features a 12-position turret with 6 powered stations and a Siemens Sinumerik 810D control system. An identical TSL 500 from 2006 is available at the same location in the Düsseldorf area. Anyone looking for two identical machines for a manufacturing cell can acquire both together. TECHNICAL DATA - Year of manufacture: 2005 - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-position, with 6 powered stations - Main drive: 22 kW, max. 4,200 rpm EQUIPMENT AND ACCESSORIES - Tsubaki chip conveyor with cable carrier (SRF 040) - Tool holders, stocked - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. Nwjdpfx Ajz H Ufvjiron AREAS OF APPLICATION Suitable for shafts, flanges, and housing components up to 400 mm in diameter, including drilling and milling operations. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact details for local transport companies. Price on request. Please feel free to contact us via the contact form.

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning Nwjdpfx Aiozu Swnsrsn • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description Nwodeyr Dawopfx Airjn An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: Nwedeyanbbjpfx Airsn - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. Njdpfx Aioz H Udxorewn AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 15511601/120, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 4,045 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 317 mm, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,200 mm, Equipment: CE marking, documentation/manual, HOLZ-HER Horizontal-Nesting-CNC Dynestic 7507, Baujahr 2018, Lieferung ab Standort Enthalten: Nsdpey Nzubofx Airjwn Software Campus V7 CAD/CAM, 1 Floating License CAMPUS V7 „Better Nest“ für rechteckige Bauteile High-Speed-USB-Server Handbedieneinheit Bedienpult mit 21,5" 16:9 Flachbildschirm Bohrkopf 7884, 14 Spindeln 10/4 inkl. Nutfräse Guscugw Njy Nzubouob Fräseinheit 7830, 8 kW (S6/40) Werkzeugwechsler, 6 Positionen, Pick-Up-Ausführung Werkzeugwechsler 7872 mit 1 Werkzeugfach, in X- und Y-Richtung schwenkbar Winkelgetriebe 7868 Individuelle Hinteranschläge ECO Vac – intelligentes Vakuumsystem Vakuumpumpe 3 x 140 m³/h = 420 m³/h, luftgekühlt Sicherheitslichtschranke Zentralschmierung, manuell EasyLabel-Drucker 1 zusätzliche Bearbeitungsstation A, hinten mit Anschlag Wärmetauscher zur Steuerungsschrankskühlung, max. 32 °C DC-Notstromversorgung (USV) Personensicherheit durch vertikale Sicherheitslichtvorhänge an allen vier Seiten der Maschine, für optimalen Zugang zum Maschinentisch. Manuelle Schmierung – Schmierstellen für alle Linearführungen in X, Y und Z sowie für alle Kugelgewindespindeln in X, Y und Z. Zusätzlicher Vakuumanschluss für 10 Vakuumsauger inkl. Wechselschlauch Vakuumsauger

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Nedpfx Aoyf I Hbeirswn

Year of construction: 2013, condition: ready for operation (used), A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible. Nwedpfxsyw Svle Airjn

Year of construction: 2000, condition: good (used), Technical specifications Nwsdev Tz I Repfx Airen Capacity: 2100 x 650 mm