Used Masturn 550 for sale (2,725)

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change Nledjy Uhfkjpfx Alhoc

Condition: good (used), Year of construction: 2006, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Nsdpfx Aey S Tx Dolhjlc Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining • Complete robot automation including infeed and outfeed conveyors

Condition: new, Year of construction: 2026, machine/vehicle number: 20251212004, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 5.029 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 456 x 170 x 248 cm CE mark: yes Other information Fuel consumption: 75 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 760 l Production country: CN Nledpfxey Uq D Ns Alhoc Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1955, groove width 90 mm Nljdjy D A Dyopfx Alhoc drawing length 550 mm table surface area 400x300 mm a lot of tools

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Options / surcharges: Pressure control valve: ¤400.00 Nodpjutuy Asfx Alhslc Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, Equipment: CE marking, documentation/manual, emergency stop, ZDV Series - Circular Type Dryers Nlodpfx Ael Sm N Tjlhoc For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Nsdpfx Aloy S Rp Tsholc Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Coolant system, 70 bar, Chip conveyor.

Condition: new, Year of construction: 2026, machine/vehicle number: 7735357, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 5.215 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 467 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 72 Liter / Hour at 75% Load Generator: Mecc Alte ECO40 3S4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1750 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Nsdey T D Dyopfx Alholc - Control Panel - Steel canopy - Tank = Remarks = Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: good (used), Year of construction: 2007, functionality: fully functional, EDGE BANDING MACHINE WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm Nledpfjy Dcipjx Alhec * Rolls: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electrics: 400 V, 50 Hz, 3-ph Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Control panel at machine infeed Separating agent application Jointing cutter unit: 2 x 2.2 kW 1 x with feed direction and 1 x against feed direction

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet Nedpfx Aom Nb Rielhelc >capacity through spindle 60 mm >max. piece length 340 mm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 550 h, load capacity: 1,000 kg, lifting height: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, battery capacity: 138 Ah, battery voltage: 24 V, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Mono Condition: Refurbished, no warranty Nledpfx Asy Rviislhsc Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 138Ah Battery type: Lithium-ion Battery year of manufacture: 2023 Description: Serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Without paint. - with initial lift

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Nodpfx Aey Htgqolhjlc Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: ready for operation (used), Year of construction: 2021, This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Nlsdpfox D Exqsx Alhec • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) • Blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilever table support surface: 1250 x 650 mm • Telescopic stop for crosscuts up to 3200 mm • Crosscut stop swiveling range: 90° to 45° • Rear table extension behind saw axis: 1200 mm • Rip fence: electronically positioned via ball screw, enclosed/dust-free in the table

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Nljdpfjyapkwox Alhjc Distance between centers: 1000 mm Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Max. swing in gap: 710 mm Spindle bore: 52 mm Morse taper: No. 5 Max. cross slide travel: 350 mm Power: 11 hp

Condition: new, Year of construction: 2026, machine/vehicle number: 20132586945, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Volvo TAD1346GE, General information Field of application: Construction Weights Empty weight: 4.860 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 432 x 152 x 243 cm CE mark: yes Other information Fuel consumption: 76.7 Liter/Hour at 75% Load Generator: Stamford S5L1D-D41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Production country: TR Nljdpfexvk Inex Alhoc Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320017, fuel type: diesel, motor manufacturer: Perkins 2506C-E1STAG2, General information Field of application: Construction Nljdpfjyzl Atjx Alhjc Weights Empty weight: 5.395 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 451 x 160 x 235 cm CE mark: yes Other information Fuel consumption: 81 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2806J-E18TAG1, General information Field of application: Construction Weights Empty weight: 6.740 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 542 x 204 x 243 cm CE mark: yes Other information Fuel consumption: 94.5 Liter / Hour at 75% Load Generator: LL6114K Nodpsw A E T Usfx Alhslc Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1125 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = EU STAGE 5 Compliant 50/60 Hz switchable frequency via terminal link 550 kVA Prime power Spark arresting silencer

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Weights Empty weight: 5.071 kg Functional Nodpfsx S Umiox Alhelc Generator capacity: 550 kVA Dimensions of cargo space: 493 x 166 x 232 cm CE mark: yes Other information Fuel consumption: 73.6 L/Hour at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Weights Nledpfx Ajxpg U Delhec Empty weight: 3.699 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 380 x 113 x 222 cm CE mark: yes Other information Fuel consumption: 73,6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250214003, fuel type: diesel, motor manufacturer: Cummins QSZ13-G3, General information Field of application: Construction Weights Empty weight: 4.950 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 425 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 74.2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Additional information Please contact Team DPX for more information = Additional options and accessories = Nodpfx Aloxfpr Rjhslc - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Cummins QSZ13-G10, General information Nledpowddwnjfx Alhec Field of application: Construction Weights Empty weight: 5.350 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 452 x 178 x 262 cm CE mark: yes Other information Fuel consumption: 77.1 Liter per Hour at 75% Load Generator: Stamford S5L1S-D4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: reconditioned (used), Generally overhauled grinder manufactured by LŽT Kikinda, type URB 550/750/1000. Machine Features: Nedpfx Ajv Tah Nolhslc table area 880/1130/1500 x 300 mm Max. Grinding length 550/750/1000 mm Max. grinding width 350 mm Max. Grinding wheel axis height 500 mm Max. Cross stroke of the table 300 mm Max. Longitudinal stroke of the table at max. speed 570/770/1020 mm normal size of magnetic plate 500/750/1000 x 300 mm Sanding disc 300x50x127 mm Grinding accuracy 5 microns new electrical cabinet with components manufactured by ABB, Schnieder Painting in the final color according to the customer's wishes Warranty on work: 6 or 12 months. Delivery time: by agreement. Feel free to call for anything else.

Condition: new, Year of construction: 2024, turning diameter over bed 250 mm turning diameter over slide rest 145 mm Nlodpfx Aewlvk Ajlhec turning length 550 mm center height over bed 125 mm centre distance 550 mm bed width 135 mm spindle bore 26 mm turning speed range - stepless 50 - 2.000 U/min power requirement 750 W 3-jaw-chuck diameter 125 mm taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 70 mm voltage 230 V weight of the machine ca. 120 kg dimensions of the machine ca. 1,25 x 0,60 x 0,50 m

Condition: new, Year of construction: 2025, functionality: fully functional, Conical rotary sieve for filtering juices, mounted on a stainless steel frame; integrated juice collection tank 150 l, Nsdpfsq H Axxex Alhslc equipped with a filling level sensor for automatic switching of the subsequent juice pump depending on the filling level. Diameter: 550 mm Screen perforation: 0.3 mm Power supply: 3x400V, 50 hz, 0.5kW/16A

Condition: good (used), Year of construction: 2018, operating hours: 13,665 h, load capacity: 3,500 kg, lifting height: 5,499 mm, fuel type: diesel, mast type: triplex, construction height: 2,520 mm, Linde H35D-02 Triplex 550 Freelift / Sideshift / Fork Positioner VW Diesel 2018 Video can be sent via WhatsApp. Ongoing stock, see website. Nlsdpfjy Rkngex Alhsc Prices are ex Nuland. Van de Wert Trading B.V. holds a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland