Used Material Separators for sale (19,395)

Condition: ready for operation (used), Genie SLC-18 Mobile Material Lift Superlift Contractor Lift Maximum lifting height: 5.64 m Load capacity: 295 kg Ledewaxhgspfx Aansak Folded height: 2.18 m Machine weight: 140 kg You are welcome to stop by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: good (used), Material tester - Height: 100cm - Width: 120cm - depth: 75cm - up to 300T Laodpfx Aoh E Egnsanjk Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year of construction: 2025, condition: like new (used), Application with screening shafts: Separating stones, branches, roots, turf, debris, etc. from still usable waste soil. Even in moist soil. Mixing compost, sand, substrate, etc. in one operation with screening is easily possible. Screening of topsoil, construction rubble, gravel. Backfilling of structures and sewer ditches, etc. Installations for other grain sizes or shafts are also available; please ask us about this. The installed adapter can be purchased separately or modified; it is not included in the price. For excavators from 6 t For wheel loaders from 4 t Lajdpfxswi N D Ds Aanjk Weight in kg: 600 Throughput: 16 - 23 m³ / h Leakage oil connection required: 2

Year of construction: 2005, condition: ready for operation (used), Zig-zag fine material separator Laodpfef Rlc Dsx Aanjk Cross section: approx. 500 / 300 mm For the separation of fines from the regrind Equipment: 2x rotary valve type NU 250 With Vulkollan seal, each 0.37 kW, 1x material conveyor blower type MFT 75/500, 11 kW

Condition: refurbished (used), functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, empty load weight: 53,050 kg, Year of construction: 2012, operating hours: 13,200 h, machine/vehicle number: 835.5.1445, Very good overall condition! The engine and wear parts were replaced in 2024 - total overhaul cost approx. €70,000 No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Unladen weight: 53,050 kg Fuel type: Diesel Lasdpfxev Ran Ds Aanjk MACHINE DETAILS Total operating hours: approx. 13,200 h Engine running time: approx. 160 h (since replacement) EQUIPMENT - Tracked chassis

Year of construction: 2023, condition: good (used), Top condition – with warranty Special equipment available on request. Price: On request The ideal attachment for wheel loaders to evenly distribute material such as concrete, asphalt, bulk goods (sand, grit, gravel, topsoil, salt, etc.) via a conveyor belt. Possible areas of application include road construction, pipeline and sports field construction, as well as municipal use. Cost-effective alternative to a berm paving machine. Ledpfxow Hycro Aanoak General description (including photos and application videos) and technical data for the product can be found on our Optimas website. The photos are for illustrative purposes and do not show the actual products for sale. If you are interested, please feel free to contact us at any time by phone or email.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Ledpfx Asg Sxmfsaneak Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. Lsdpoph U Anefx Aaneak The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Tipping skip with drive and auger for self-collection Lsdpfx Aajr Iyb Nenjak

Condition: not inspected (used), functionality: fully functional, Wooden crate with nuts, bolts, screws, and other fasteners. 820kg (weight is excluding the wooden crate) Ledow Hrw Iepfx Aanjak Lot includes the wooden crate.

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 45940-30, overall weight: 2,150 kg, Large conveyor belt for sale Laedpfjv N I E Iox Aanek Weight: 2150 kg

Condition: excellent (used), Recyclables depot lockable  The article is a recyclable material depot. The depot is equipped with a lowering gate as a locking mechanism and thus offers secure protection for valuable goods and merchandise. Lodeh I D Auepfx Aanjak Dimensions: 4.25 metres wide, 1.35 metres deep and 2.85 metres high Manufacturer locking mechanism: Warema Condition: used  Complete factory locking system, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), We offer here 4 transport rollers for sale. Included in delivery are: 04x fixed castors, used Material color castor: black Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 37,5 mm Roll material: solid rubber Material rim: polypropylene plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Lasdpfx Ashunwaoansk Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg

Condition: new, ZAB0-0100-0012, MC002X2_42, Applied Materials Electric Motor Active Part - New Model: ZAB0-0100-0012 Lodpsq S Tiaefx Aanjak Type: MC002X2_42 Condition: New

Condition: not inspected (used), functionality: unexamined, Used Cleanroom Mobile Scaffold Two Platform Heights: ~1.29 meters ~2.29 meters With manual. For indoor use only. Laodsxiv Hispfx Aanek Max 250kg per work platform.

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Laedpfsn R Edmjx Aanek General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, ZAB0-0100-0013, MC002X2_42, Applied Materials E-motor Passive Part Rev.0 - New Model: ZAB0-0100-0013 Type: MC002X2_42 Condition: New Lsdpfxeq S Th Ss Aanoak

Condition: good (used), We offer here a used rear wall grille holder for sale. Ledjgyfxpjpfx Aanjak Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized dimension leg A: approx. 115 x 85 mm dimension leg B: approx. 50 x 85 mm distance back wall grid: approx. 85 mm oblong hole dim.: approx. 21 x 10 mm distance center-center-hole: approx. 50 mm Weight/piece: approx. 0,403 kg Shipping costs on request

Condition: new, 0270-0271, Applied Materials Universal Lifting Handle Endura Attachment - New Model: 0270-02710 Ljdsq S Sd Nepfx Aanjak Condition: New

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm Ljdpfx Aaen R Egzjnjak material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), We offer here a used rear wall grille holder for sale. Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized Lsdpfxogyfxwj Aanjak dimension leg A: approx. 90 x 320 mm dimension leg B: approx. 30 x 135 mm distance back wall grid: approx. 180 mm slotted hole dim.: approx. 52 x 9 mm Distance center-center-hole: approx. 60 mm Weight/piece: approx. 0,524 kg Shipping costs on request

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm Lasdpfx Aaslucaqonjk The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: good (used), The depth bar is suitable for a stand depth of 1,050 mm and a crosshead width of max. 40 mm. The scope of delivery includes: 01x depth bar, used Material color: orange total length: approx. 1.058 mm f. depth of upright: approx. 1.050 mm clear span: approx. 960 mm Technical data for the depth bar: Ledpsh Hni Nsfx Aanoak Shelving system: Nedcon profile dim.: 60 x 40 mm crossbar support: approx. 43 mm material thickness profile: approx. 1,50 mm material thickness support: approx. 4,00 mm Unit weight: approx. 2.50 kg General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Ledpfsibzftox Aanoak Material color: orange IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 06x nuts 06x washers

Condition: good (used), Technical data for compensation plate: Manufacturer: Bito PRO Scope of delivery includes: 01x compensation plate, used Suitable for base plate M; Mounted on upright P4-P6 Material finish: Sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 120 mm Weight: approx. 0.46 kg | pc. Ledpfoi Hkngjx Aanjak