Used Mazak Vtc for sale (353)

Condition: excellent (used), Year of construction: 2018, operating hours: 40,807 h, functionality: unexamined, Full 5-axis. Max. swing diameter over cross slide ø658 mm (ø25.9"). Max. machining diameter (upper turret) ø658 mm (ø25.9"). Max. machining length 2,497 mm (98.31"). Max. bar capacity ø102 mm (ø4.02"). X-axis travel 615 mm (24.21"). Z-axis travel 2,563 mm (100.91"). Y-axis travel 260 mm (10.24"). B-axis indexing range -30° to 210°. Main spindle chuck size 12". Main spindle speed 1 – 3,300 rpm. Main spindle nose A2-8. Main spindle bore ø112 mm (ø4.41"). Main spindle indexing increment 0.0001°. Hydraulic chuck for the sub-spindle (10" through-hole chuck B-210A0815X). Sub-spindle speed 1 – 4,000 rpm. Sub-spindle travel (W-axis) 2,175 mm (85.63"). Main spindle nose – A2-8. Main spindle bore – ø91 mm (ø3.58"). Bearing ID – ø130 mm (ø5.12"). Min. indexing increment – 0.001°. Milling spindle type: turret with automatic torque control. Milling spindle speed 12,000 rpm. Max. milling spindle torque 120 Nm (88.5 ft·lbs). Turning tool shank height 25 mm (1"). Boring bar shank diameter ø40 mm (ø1.5"). Rapid traverse speed: X-axis 50 m/min (1,969 ipm). Rapid traverse speed: Z-axis 40 m/min (1,575 ipm). Rapid traverse speed: Y-axis 40 m/min (1,575 ipm). Rapid traverse speed: W-axis 30 m/min (1,181 ipm). Tool holder interface HSK-A63 (T63). Tool magazine capacity: 72 tools. Max. tool diameter/length (from reference line) ø90 mm (ø3.54") (if adjacent tool positions are empty: ø125 mm (ø4.92"))/400 mm (15.75"). Max. tool weight 12 kg (26.46 lbs). S/Nr. 285804 (2018/04). Note: No tools included. With Mazatrol SMOOTH X CNC control. Hydrafeed MSV110 bar feeder S/Nr. C02-18L28. SMW-AUTOBLOCK Telbrook T-17915 SLU-X 3.2 Stable, ø50–200 mm. Filtration Service Engineering E7377 chip management system S/Nr. 21025 (2019). Tool interface (upper turret/automatic). Dual foot pedal switch for the chuck. Through-spindle coolant supply. Simultaneous delivery of 0.5 MPa (70 psi) coolant through spindle and coolant supply (upper turret). Long drill holder, tool length 400 – 1,000 mm, max. ø80 mm. Machine dimensions: L 6,390 mm x W 2,945.5 mm x H 2,770 mm. Machine weight 20,400 kg. Gjdoxdbuuepfx Ah Dekf

Condition: used, Year of construction: 2010, travel -x axis 630 mm travel -y axis 765 mm travel -z axis 600 mm control MAZATROL Matrix number of spindle speeds 18.000 U/min a-axis +30 ~ -120 ° c-axis +/- 360 max. working diameter 730 x 500 mm 0 500 mm numbers of positions in the tool changer 80 Gjdpfx Aex Avtieh Djkf tool taper HSK 63T 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with a rotary function (turntable) The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II T

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stock-No. 1022-E06344 Type of machine Machining Center - Vertical Make MAZAK Type MTV-655/80N Year of manufacture 2006 Type of control CNC Storage location NRW / Germany Country of origin Japan Delivery time Immediately Freight basis ex foundation Mazatrol 640 M CNC Control Travels: X-axis 2000 mm Y-axis 650 mm Z-axis 650 mm Spindle speed 6000 rpm with two gear stages Tool holder SK 50 Spindle motor power 18.5 kW Table size: 2240 x 650 mm Machine weight 12000 kg Equipment: Gjdpex Aumhjfx Ah Dekf Dual pallet changer (2PC) 4-axis Kitagawa rotary table Tool changer with 60 tool positions Zero Clamp zero-point clamping system Mayfran chip conveyor Coolant system with 70 bar pressure Internal tool cooling ILT internal extraction system with air filter

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Gksdpfx Ajx Dcbpjh Dsf Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Max. Bar diameter: 35 mm Turning length: 600 mm Spindle speed 6,000 min-1 Counter spindle 12-position turret with driven tool Chip conveyor Godewlu Ndepfx Ah Dokf FMB bar feeder SL 80V

Condition: used, Year of construction: 2005, machine/vehicle number: 181026, turning diameter: 280 mm, spindle speed (max.): 6,000 rpm, workpiece weight (max.): 4,100 kg, bar diameter (max.): 51 mm, CNC Turning Center MAZAK QUICK TURN NEXUS 100MS Lathe adapted for oil operation (fire extinguishing system) Offer direct from owner – no intermediaries! - CNC control: MAZATROL 640T NEXUS - Max turning diameter: 280 mm - Max turning length: 309 mm - Max bar diameter: 51 mm - Max main spindle speed: 6000 rpm Gsdpswmbrbsfx Ah Djkf - Sub-spindle - 12-position turret - Dimensions (L x W x H): 2100 x 1600 x 1800 mm Contact: 0048509250804

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Gjdpfjv Dxw Rox Ah Dskf Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. Gedpfjx Avr Sex Ah Dskf - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: like new (used), Year of construction: 2023, functionality: fully functional, We are offering for sale a beautiful 5-axis machining center MAZAK VARIAXIS C-600, suitable for simultaneous machining. The machine has very few, if any, spindle hours and was manufactured in 2023. Technical Data: - Travel: X: 650 mm, Y: 550 mm, Z: 530 mm - B-axis - C-axis - Table / pallet size: Ø 600 mm × 500 mm pallet table (standard) - Max. workpiece size: Ø 730 mm × height 450 mm - Spindle speed: 18,000 rpm (SK40) - Control: Smooth Ai Dimensions: W: 2,350 mm, L: 2,962 mm, H: approx. 3,039 mm Machine Equipment: SPECIAL ACCESSORIES - Work table surface with T-slots 650 x 500 mm - Chain magazine with large capacity for 60 tools SAFETY EQUIPMENT: - Preparation for detachable handwheel COOLANT SUPPLY: - High-pressure coolant supply 15 bar through spindle / 35 l/min - High-pressure coolant interface 70 bar (European interface) Gjdsxz Dp Ajpfx Ah Dskf CHIP MANAGEMENT: - Preparation for chip conveyor with left-side discharge - Chip conveyor MT10 with hinged belt design - Chip cart SMOOTH Ai CONTROL OPTIONS: - Smooth synchronous tapping - Rapid traverse at constant tilt angle - 5-axis tool radius compensation 5-Axis Machining Package for MAZATROL SmoothAi This option includes: - EIA/ISO 5-axis simultaneous machining - Spline precision interpolation (EIA) - Tool tip control / 5-axis - 5-axis spline interpolation - NOXXX path error suppression

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Gjdpfx Ahex At Svs Djkf Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2000, Mazatrol Fusion 640M control system Travel X/Y/Z 710/610/660 mm Spindle speed 12,000 min-1 Tool magazine for 80 tools SK40 2-fold pallet changer (500x500 mm) Max. Workpiece D 730 mm, H 710 mm, 500 kg Chip conveyor Gsdpfx Aouvg Nujh Djkf

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, controller manufacturer: MAZAK, controller model: PC FUSION 640 M, CONTROLS .. CNC controls MAZAK PC FUSION 640 M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. - positioning/indexing: 360000 ° SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. drive power: 37 kW TOOL MAGAZINE .. number of positions: 120 AUTOMATIC WORKLOAD EQUIPMENT Gedpfx Asxzbrboh Dekf .. store type: pallet changer .. number of store positions: 6 .. pallet length: 1000 mm .. pallet width: 1000 mm .. number of pallets: 6 A high-quality Mazak FH 10800 is available for sale, equipped with a 6-fold pallet storage system, ideal for automated machining processes and high production output. The machine is in very good condition and is available immediately. With a large travel range, powerful spindle and extensive equipment, this horizontal machining centre is particularly suitable for demanding machining tasks in mechanical engineering or series production. NC4 laser Renishaw OMP60 probe Synchronised thread cutting Removable handwheel CNC performance package Mayfran Concep chip conveyor with drum filter 70 bar high-pressure pump

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Gksdpfstugggjx Ah Dof Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: used, Year of construction: 2017, travel -x axis 1.050 mm travel -y axis 530 mm travel -z axis 510 mm control MAZATROL Smooth G number of spindle speeds 40 - 12.000 U/min tool taper SK 40 numbers of positions in the tool changer 30 table-size 1.300 x 550 mm Milling machining centers - vertical | VCN-530C - 2017 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Gjdsx Avr Eopfx Ah Dokf The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VCN530C | VCN-530 C | VCN 530C | VCN 530 C

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,045 mm, turning diameter: 350 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 1,045 mm, Mazatrol Matrix CNC control 3-jaw chuck 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 610 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 1045 mm Planweg (x) / cross way (x) 190 mm Längsweg (z) / longitudinal way (z) 1045 mm Drehzahlbereich / spindle speed 35-5000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 26 (35) kW Gewicht der Maschine ca. / weight 5900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Godpfxoxyw Nts Ah Djkf

Condition: used, Year of construction: 1998, Mazak SQT30M CNC Lathe, year 1998, Japan C-axis, driven tools Mazatrol T plus Turning length: 1000mm 12-inch chuck Spindle bore: 98mm VDI50 turret Tailstock Probe Gksdpfx Ahoxutcfs Def Chip conveyor

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control system: Mazatrol 640 MT Pro Travel distances: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speed of the axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm COUNTER SPINDLE Drive power: 26 kW Max. torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/chip removal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure levels PLC - Dual change filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Synchronous counter-rotation of turning and milling spindle - C-axis 0.0001 degree (counter spindle) - Overload monitoring system for the spindle and axis feed system - Automatic ON/OFF with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1,500 U) - Hand type D3 (clamp jaws types A, B, C, D, E) - Maximum workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) Gedpfjxy Nzusx Ah Djkf - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at the chuck CONTROL OPTIONS - Cylindrical interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous tapping, MAZACC2D, - EIA/ISO, tool length compensation - Fully programmable B-axis 0.0001° - Software for 5-axis simultaneous mode - For main and sub spindle 3-jaw quick-change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Sub spindle Speed range: 5,000 rpm Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Godpfx Ajx Ezvkoh Dskf Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: good (used), Year of construction: 2007, machine/vehicle number: MP6200Y, ● Delivery terms: Ex works, loaded onto truck ● Location: 73547 Baden-Württemberg - Lorch ● Availability: Immediately, subject to prior agreement ● Payment terms: Advance payment - by bank transfer ● Internal reference no.: KLAU ● Can be inspected under power: Yes Technical Data: ● Control: Mazatrol 640 T ● X-axis travel: 240 mm ● Y-axis travel: 100 mm ● Z-axis travel: 495 mm ● Max. machining diameter: 320 mm ● Bar capacity: 51 mm ● Main spindle speed: 5,000 rpm ● Main spindle motor power: 22 kW ● Sub spindle speed: 5,000 rpm ● Sub spindle motor power: 22 kW ● 2 x 12-position turrets with driven tools ● CNC option package EIA / ISO programming ● Tool eye ● Partition wall Gkodpfx Ajx Elrish Dof ● Automatic parts catcher with conveyor belt ● High pressure coolant 10 bar Scope of delivery: ● LNS short bar loader Quick Load Servo III ● Mayfran ConSep 2000 II chip conveyor Dimensions & Weight: ● Installation dimensions L x W x H approx.: 5000 x 3500 x 2000 mm ● Weight approx.: 8,400 kg Information: ● The machine has been fully inspected and geometrically measured by a Mazak specialist. It is immediately ready for operation! ℹ️If you have any questions or would like to arrange a viewing, please contact us! Additional notes: ►Upon request, we can offer transportation to the destination ►The quoted price is net, plus VAT ►The goods are sold excluding any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale to business customers only❗

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2700 mm Measurements depth 4200 mm Measurements height 2650 mm Machine weight 11500 kg Control Unit Brand MAZATROL Model PC-FUSION-CNC Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm Godpsx D Ihuofx Ah Dokf Additional Equipment Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg Tool Capacity: 64 positions This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gjdpfxsiyx Dio Ah Dskf Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Machine type: CNC Horizontal Machining Center Model: FH6800 Manufacturer: MAZAK Control: Mazatrol 640M Year of initial operation: 2010 Location: Germany Gedpfx Aexxzlvsh Dokf Options: - Number of tool magazine pockets: 80 pcs - MAZAK Monitoring B (Renishaw probe) - Software options package “Performance” - NC rotary table (C-axis) 0.001 degree - Chip conveyor Mayfran Consep 2000 - Through-spindle coolant (IKZ) pressure: 20 bar Travel X-axis: 1,050 mm Travel Y-axis: 800 mm Travel Z-axis: 880 mm Rapid traverse X/Y/Z-axis: 40 m/min Pallet size: 630 x 630 mm Max. spindle speed: 7,000 rpm Coolant supply: 20 bar

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm Gedpox E Twajfx Ah Dekf • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. All information provided without guarantee

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, table width: 650 mm, table length: 1,740 mm, rotational speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, number of slots in tool magazine: 60, Mazak MTV-655/60 Gsdexw Hztjpfx Ah Dokf

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Gkedjtp Hgzjpfx Ah Dof Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.