Used Mdf for sale (170)

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Ksdjd Dgw Ujpfx Abcoww Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Untha LR 700 single-shaft chipper, new Drive power: 18.5 kW Hydraulic drive power: 1.1 kW Rotor diameter: 300 mm Rotor speed: 98 rpm Number of indexable inserts: 19 Filling opening: 700 x 1065 mm Extraction nozzle diameter: 200 mm Required extraction speed: 28 m/s Recommended pipe cross-section: 200 mm Weight: approx. 1800 kg Workplace-specific Sound pressure level LPA 1 m: 82 dB(A) Diameter of perforated screen: 15 - 40 mm Throughput*: up to 6 srm/h (depending on material properties and perforated screen diameter) Applications - Hard and soft wood - OSB - Particleboard - MDF - Veneers - Cross-cut wood - Reliable and economical cutting system - Unique indexable insert geometry Kwedju Id Ugepfx Abcew - Low-wear perforated screen - Powerful and low-wear swivel slide - Energy-efficient and trouble-free drive concept

Condition: excellent (used), Workbench, usable from both sides. Length: 2500 mm. Depth: 1250 mm. Worktop height: 930 mm. Height with superstructure: 1560 mm. Material: multiplex, 30 mm thick. Structural timber: 16 x 6 cm. Intermediate shelves: 25 mm MDF. Weight: 250 kg. Kwsdpfx Absxvtaajcew

Condition: excellent (used), Year of construction: 2020, HPPA through-feed press manufactured by Famad Paczków, year of manufacture 2020. Kodpsvla A Dsfx Abcjww The press is designed for through-feed gluing of door packs, MDF boards, plywood, veneer, etc. It features a pneumatically lifted chain conveyor for loading and unloading, and can operate independently or as part of a production line.

Condition: excellent (used), Year of construction: 2011, 5-axis gantry machining center for the production of components for chairs, tables, doors, etc. from wood and MDF Max. useful working area (X-Y-Z) mm: 3550 x 1800 x 750 Spindle power: 2 x 7.5 KW Spindle speed: 2000 - 18000 rpm Equipment: Frame 2 x movable loading tables 4-spindle head Kjdpjxau Uyjfx Abceww 2 x loading magazines Numerical controller Electrical cabinet Control panel Protective cabin

Condition: excellent (used), Year of construction: 2021, MC 1100 multi-blade saw from 2021, practically unused, purchased as a backup. It can cut 2200 x 2800 mm panels twice in a row without losses. The machine features 4 motors, 3 idle pressure rollers, and a saw spindle for blades with a diameter of Ø200-Ø250 mm. It boasts a robust, compact design. The main control panel at the front is equipped with a smooth feed speed regulator, allowing precise adjustment to any material for optimal finishing quality. Pawls and top rollers minimize kickback risk, ensuring maximum operator safety. The one-sided open frame provides unlimited capability for cutting extra-wide, oversized elements without the need for additional devices. Includes 3 automatic transport rollers and rubber rollers between saw blades to reduce vibration of MDF panels and wood during processing. TECHNICAL DATA: Cutting width: 1100 mm Maximum cutting height: 50 mm Minimum panel length: 650 mm Feed speed: 5-20 mt/min Feed motor: 0.75 kW, 1410 RPM Maximum power consumption: 22 kW, 380V Kwodpfxswyqvvo Abcjw Power: 30 HP Maximum blade diameter: 250 mm Saw shaft diameter: 70 mm Saw speed: 3500 RPM Maximum number of saw blades: 15 Working height: 900 mm Noise level: 80 dB Pressure: 8 Bar Dimensions (W/L/H): 1640x1495x1400 mm Weight: 1590 kg Infeed and outfeed table: Yes

Condition: new, Year of construction: 2025, functionality: fully functional, Fast sanding of multiple components! We are pleased to present our latest solution – a convenient, two-handed sander designed for rapid processing of various elements such as furniture fronts, coffin parts (including assembled ones), and doors. The device also allows for sanding many items (edges) stacked together. The DMS 2HS is a pneumatic sander equipped with a Flex Trim head. This combination ensures the highest quality of sanding results. The machine only requires a compressed air supply for operation. It is fitted with a 1/4″ quick coupling and a transparent dust extraction guard. An additional advantage is the possibility to connect a vacuum cleaner to further reduce dust. The device features adjustable speed control and the ability to change the direction of operation. Key information: * Flex Trim head with a 120mm working width – equipped with a patented Snaplock adapter, enabling rapid head changes without additional tools * Customizable sanding materials to meet customer requirements – e.g., for veneer, MDF, composite, wood, and intermediate lacquer sanding Kwjdpfx Aboxt Dxhscew * Dimensions (mm): 455x240x320 * Lightweight construction * Continuously variable speed adjustment * Power supply: compressed air

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. Kwedoxc Rmqjpfx Abcjw High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2023, Demonstration machine! List price: €33,390. Machine concept: The Weima high-performance shredders offer versatile applications and are capable of processing all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, providing significant volume reduction even for bulky materials. Operation: The machine features a large feed hopper and can be loaded either manually or via conveyor belt. This hopper can be customized to meet individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. A hydraulically operated ram conveys the wood waste to be shredded into the rotor’s cutting area, with operation automatically and load-dependently controlled. The internal ram guides are made of highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted on universal joints to prevent lateral forces on the piston seals. The patented and profiled V-rotor is made of solid steel with a diameter of 252 mm, operating at a rotor speed of 80–120 rpm. The concavely ground, aggressive, and four-way reversible cutting knives/inserts are located in milled knife pockets on special knife holders. This patented system, which minimizes the cutting gap between counter knife and rotor, ensures high throughput, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is achieved via V-belts to a heavy-duty gearbox mounted on one end of the shaft. Standard features: - V-rotor with one row of knives 40 x 40 mm - Vibration-damping machine feet - Hold-down device on the ram - Horizontal ram - Control cabinet with 5m cable, incl. PLC control and LOGO! text display - Bolt-on screen - WEIMA WAP gearbox - Extraction port Ø160 mm - Straight hopper Optional equipment: - Additional rotor knife row (28 knives) - Free-cutting hopper (LOGSPACER) Kedpfsvfy Rzex Abcsww - Four-sided sectional floor - Fast reverse hydraulic with shock valve Location:

Condition: used, Year of construction: 2024, New demonstration machine!! List price: €52,742 (net). Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board and base frame with adjustable machine feet. Milling bed with 19mm MDF sacrificial board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision racks. All elements assembled, pre-lubricated, including test run, ready to use immediately. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply, and toroidal transformer, fully pre-mounted in the control cabinet, including sensors for each axis. Switching relays for automatic operation of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices provided by a moving extraction device and a laser scanner mounted on one side for working area monitoring, with a 275° and 5.5m field range (machine positioned in a corner of the room). Handheld control unit with all necessary machine operation functions, including emergency stop button and dead man's switch. Tool length sensor to determine tool length and active zero point offset. High-frequency spindle with 2.2 kW, including collet nut, frequency converter, line filter, braking resistor, and collet set. Monitor as a built-in monitor, including mini PC with Windows 10, pre-installed with Beamicon2 control software, as well as mouse and keyboard, integrated in an ergonomic desk. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation, will be sent by email prior to delivery. Vacuum table: Milling bed designed as a vacuum table, consisting of four adjustable segments. Cross table made of PE with a top plate of ... vacuum pump from Becker company with a capacity of 100 m³/hour, oil-lubricated. For connecting the vacuum pump, a 16 Ampere, 400 V AC plug is required. The customer must supply HDF 3mm double-sided raw board (2500x1300mm) as sacrificial plate for the entire vacuum table (recommended use: processing coated wood-based materials). Ksdpfxow Tfy Uo Abceww Tool set in systainer: Tool set in systainer consisting of: - 1 pc. 1.5mm left (HF152LIVHM) - 1 pc. 3.175mm 30° (HF30GVHM) - 1 pc. 6mm 90° (HF90GVHM) - 5 pcs. 4mm Z2 (HF41REVHM) - 1 pc. 5mm Z2 (HF52REVHM) - 1 pc. 5mm Z3 (HF53SRECAR) - 2 pcs. 5mm Z2 (HF52REDIA) - 1 pc. 5mm Z2 (HF52UPDOWN) - 1 pc. 4mm Z3 (HF43REVHM) - 1 pc. 6mm Z1 (HF61REVHM) - 1 pc. 8mm Z2 (HF82LAVHM) - 1 pc. 10mm Z2 (HF10SVHM) - 1 pc. 12mm Z2 (HF12SVHM) Maintenance package in systainer: grease gun 150 ml, one cartridge of high-performance grease 400 g, spray can of silicone spray grease 500 ml, one grease fitting with hose section and 30mm face milling cutter with indexable inserts. Pneumatic unit: consisting of four cylinders, throttling check valve, push-in fittings, angle push-in fittings, silencer connectors, filter regulator, push-in manifold, PE hose, and brackets, for use in a pre-configured table opening (for end-face machining). If pneumatics are required for both table openings, the position must be calculated twice (NOTE: Compressor to be provided by customer.) Technical data: Travel (X / Y) 2500 x 1300 mm, Z = 200 mm Dimensions (L / W) 1980 mm, 3800 x 2300 mm, H = 1900 mm Footprint: approx. 20 m² (smallest installation size) Weight: 1500 kg Rated voltage: 400 V Repeat accuracy: +/- 0.1 mm Connection values: 4.3 kW HF spindle

Condition: good (used), functionality: fully functional, power: 37 kW (50.31 HP), Shredder Manufacturer: Weima Model: WL12 Shredder for pallets, MDF, and all types of residual wood Feed opening: 1200 x 1200 mm Hopper capacity: approx. 2 m³ Slow-speed machine with hydraulic pusher floor Performance depending on material: 2 – 4 hopper fillings per hour Motor: 37 kW Shredder rotor with 8 x reversible knives (indexable breaker plates) Kwedpfx Aox E Rkdjbcew Knives can be easily and quickly rotated or replaced via screws Knife shaft/rotor diameter: 368 mm Rotor speed: 90 rpm 64 knives Extraction nozzle diameter: 200 mm Air velocity at extraction nozzle: 28 m/sec Rotor and gearbox replaced 6 years ago Dimensions: 2500 mm x 1900 mm x 1750 mm (LxWxH) Weight: approx. 3,300 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Kwjdouynnuepfx Abcow

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. Ksdpjfbl Epefx Abcsww The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: used, Speed: 0 - 80 m/min, Kodpogrizvjfx Abcjww Heads: 7, Planing height: 100 mm, Description: With electric box and hydraulic station. Planer Waco HM200X is used for longitudinal processing of solid wood, which results in such products as MDF panels, plastics or similar types of materials. The Waco HM200X has thirteen different stations that can be adapted to different planing modes. In addition to standard equipment such as feeders, top and bottom cutters, side cutters, the machine also has starting blocks, auxiliary feeders, flat cutters, a bevel side cutter, a cutter block and a universal cutter. The maximum working width is 200 mm and the working height is 100 mm. The feed speed can be set in a stepless range from 0-40 or 0-80 m / min. The feeder is equipped with three upper and three lower drive rollers.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Kwjdpfx Aetk It Sebcjw Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Ksdpjtqi Uyjfx Abcsww Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: ready for operation (used), Technical characteristics cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake angle Largeur de coupe130 mm Hauteur de coupe100 mm Diamètre lame300 mm Power and Motors Overall dimensions Lenght: 1400 mm Kwjdpfeuaihmex Abcew Width: 1600 mm Weight: 500 Kg

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE Kwsdpfx Aovpv Nbobcsw FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Kwodpfx Absv N Nn Djcsw Operating Methods: • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: new, storage positions 24 Boxen weight 25 kg dimensions 850 x 400 x 1650 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm. Ksdpfx Asupxm Sebcjww