Used Memobike 6050 for sale (139)

Condition: used, Year of construction: 2019, operating hours: 19,976 h, Type of fuel: Electric Empty weight: 3.411 kg Dimensions (LxBxH): 200 x 120 x 260 cm Lifting capacity: 1.600 kg Lift height: 605 cm Clearance lift height: 216 cm Fork dimensions: 1.200 x 1.020 mm - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516221V00147 - Operating hours: 19976 - Lifting capacity: 1600kg - Lifting height: 6050mm - Overhead clearance: 2600mm - Free lift: 2160mm - Fork length: 1200mm - Maximum fork width: 1020mm - Minimum fork width: 320mm - Number of wheels: 3 Wheels - Attachment: Side-shift, Fork positioner - Options: Free-lift, Heating, Full cabin, Non-marking tires, Joystick, Work lights - Mast: Triplex - Inspection valid until: 03.2026 - Drive: Electric - Brand/Type: Smart - Battery year of construction: 2019 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 2000mm x 1200mm x 2600mm (l x w x h) - Transport weight [kg]: 3411kg - Transport packages [pcs.]: 1 Nlodpfxswlhyie Aansk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Output module, CPU card, control card, output card, controller, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 4Type: 4086050262 Nsdpfsb A Sa Djx Aanolk -CPU 30 -E16-103 4MB 25MHz -Without: Graphics -Number: 1x tax card available Price: per piece -Weight: 1 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5380x1860x1760 mm Njdpfjv A Hrysx Aanjlk Weight 6050 kg Total power requirement 54,75 kw

Condition: good (used), Technical data: Working length: 6050 mm Bending capacity: 2.0 mm NC control Sheet metal cutting device: rotary shear Upper beam opening: 250 mm Motor power: 9 kW Dimensions (Length x Width x Height): approx. 7200 x 1800 x 1750 mm Weight: approx. 5 t Nsdpfxexyau Es Aanolk The seller is not liable for typographical or data transmission errors. The machine is in condition commensurate with its age regarding appearance, technology, and wear; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2019, operating hours: 4,594 h, load capacity: 1,600 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, construction height: 2,580 mm, Manufacturer + model:LINDE R 16 - Mast:3F6050 ID:25043.7271 Cat.:Used Mast:3F6050 Lowered height:2580 mm Lifting height:6050 mm Capacity:1600 kg Year:29 Hours:4594 hours Capacity:48 v / 775 ah Options:FULL options ; Nedpfjx Nzcfsx Aanolk PANORAMA glass roof !! 2 - LED Spotlight on mast !! Air-sprung SEAT with heating !! Emergency LAMP on the back !! USB & 12 volt connection !! Radio !!

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 2precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  Nodpfx Aoruwb Heanslk - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: used, Year of construction: 2019, operating hours: 22,217 h, Type of fuel: Electric Empty weight: 3.419 kg Dimensions (LxBxH): 205 x 120 x 260 cm Lifting capacity: 1.600 kg Lift height: 605 cm Clearance lift height: 215 cm Fork dimensions: 1.200 x 1.030 mm - Year: 2019 Nledpewviyxefx Aanok - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516221V00140 - Operating hours: 22217 - Lifting capacity: 1600kg - Lifting height: 6050mm - Overhead clearance: 2600mm - Free lift: 2150mm - Fork length: 1200mm - Maximum fork width: 1030mm - Minimum fork width: 320mm - Number of wheels: 3 Wheels - Attachment: Fork positioner, Side-shift - Options: Free-lift, Full cabin, Work lights, Heating, Non-marking tires, Joystick - Mast: Triplex - Inspection valid until: 12.2025 - Drive: Electric - Brand/Type: Smart - Battery year of construction: 2019 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 2050mm x 1200mm x 2600mm (l x w x h) - Transport weight [kg]: 3419kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler   Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve   Cylinders: inlet / outlet Nsdpfox Avcwex Aanolk Collection bin Conveyor 1 additional set of heads Documentation available

Condition: used, mileage: 5,30,000 km, first registration: 02/2018, fuel type: diesel, wheelbase: 6,050 mm, fuel: diesel, emission class: euro6, suspension: air, Three-axle tractor unit, wheelbase 6050 mm, third axle liftable, non-steered, swap body system, full air suspension, automatic gearbox, retarder, air conditioning, 530,000 km. Nledowutpuopfx Aanek Price indicated above plus 22% VAT and registration.

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor Nlodpfxoxdxv Nj Aansk

Condition: like new (used), Year of construction: 2019, operating hours: 4,770 h, load capacity: 1,600 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, construction height: 2,580 mm, Manufacturer + model:LINDE R 16 - Mast:3F6050 ID:25043.7275 Cat.:Used Mast:3F6050 Lowered height:2580 mm Lifting height:6050 mm Capacity:1600 kg Nledpfx Aex Nzb Ueanek Year:29 Hours:4770 hours Capacity:48 v / 775 ah Options:FULL options ; PANORAMA glass roof !! 2 - LED Spotlight on mast !! Air-sprung SEAT with heating !! Emergency LAMP on the back !! USB & 12 volt connection !! Radio !!

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 3precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. Njdpfx Aaeruwb Uonslk All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: used, Year of construction: 2020, total length: 6,050 mm, total height: 2,400 mm, total width: 1,750 mm, Weight: 5.000 kg Price: On request - Year: 2020 - Documentation available: Yes Nljdpfsx Db Dpox Aansk - CE marking present: Yes - CE certificate present: No - Serial number: 1000031582 - Main motor power [kW]: 18.0 - Software: Optiplanning - Easy version, SOPHIA services - Saw blade bore diameter [mm]: 65 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 350 - Max. cutting length [mm]: 3800 - Max. cutting width [mm]: 3800 - Number of feed clamps [pcs]: 6 - Feed speed: - └ Max. feed speed [m/min]: 25 - Voltage [V]: 400 - Current consumption [A]: 36 - Power [kW]: 18.0 - Transport dimensions: 6050mm x 1750mm x 2400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! Nledpfx Aaexzivbonok TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Power measurement during machine dismantling: 5,462 W (end of October 2025) (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. All parts are available at short notice.

Condition: good (used), Feed speed 10-40 m/min Distance: roller fence to sawline 230 mm Distance: feed rollers to sawline 159mm Distance between saws 5mm to 180mm Saw blade dimensions 6050 x 100 x 1.06 mm to max 1,24mm Nodpoxhfx Sofx Aanolk Saw blade speed 35 m/sec Saw wheel diameter 915 mm Saw motor power 2 x 15 kW Feed motor power 1,1 kW with inverter. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 6000 kg

Condition: used, maximum load weight: 16,050 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 11/2010, Year of construction: 2010, Equipment: ABS, Manufacturer HMK Bilcon Model 22.000 l. ADR Tank 4 compartment Year 2010 Condition Very good Serial Number UH9TP2BXXA1HB1615 Ref. nr. 7987 Nlodpfx Aexwr Npeanek Reg. date: Disc brake: ? ABS: ? Axles: BPW Tire Size: 425/65R22,5 Cover% left 80 - 60% Suspension: ? Toolbox: ? Total weight: 20000 kg. Net weight: 3950 kg. Load capacity 16050 kg. Tank capacity: 21.900 l. Separation room: 4 (

Condition: like new (used), Year of construction: 2019, operating hours: 3,987 h, load capacity: 1,600 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, construction height: 2,580 mm, Manufacturer + model:LINDE R 16 - Mast:3F6050 ID:25023.0279 Cat.:Used Mast:3F6050 Lowered height:2580 mm Lifting height:6050 mm Capacity:1600 kg Year:29 Nljdjx Nza Ropfx Aanek Hours:3987 hours Capacity:48 v / 775 ah Options:FULL options ; PANORAMA glass roof !! 2 - LED Spotlight on mast !! Air-sprung SEAT with heating !! Emergency LAMP on the back !! USB & 12 volt connection !! Radio !!

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 4precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. Nledpfxoruwccj Aansk The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: used, Year of construction: 1960, total height: 1,500 mm, total length: 1,400 mm, total width: 6,050 mm, Empty weight: 4.500 kg Price: On request - Year: 1960 - Documentation available: No - CE certificate present: No - Serial number: - Drive system: Conventional - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 71 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Removable bed - Swing over removable bed [mm]: 880 - Control: Conventional - Transport dimensions: 1400mm x 6050mm x 1500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nlodpfx Aaewnhpienjk Lukas van Rossum

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 137900 € 2606.31 € 220 to 6050 mm Y1 / Y2 / X Achse 265 mm 5100 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 1050 mm 154 mm 250 l 22 kW 7500 mm 1770 mm 3350 mm 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF:- more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... Njdpfswiq R Ssx Aanjlk PRICE FCA TÜRKIYE optional equipment: R-axix Z1/Z2/R-axes DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1850x-travel: 2020y-travel: 6050Laser performance: 6precision of position: 0,05repeat accuracy: 0,03weight approx.: 16000messurements (LxWxH): 13200 x 2800 x 2300Table change time: 15Maximum speed: 120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. Nodjtwtnzspfx Aanjlk All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: used, Year of construction: 2007, Knipbank knipschaar plaatschaar Type: Hydraulisch Nsdpfx Aaowng Rronjlk Fabrikant: Jean Perrot Type: CSE 3G 6006 Bouwjaar: 2007 CNC: SEW DOP11A Knipbreedte: 6050mm Knipdikte: 6mm Elektrische achteraanslag Motorvermogen: 15kW Machine-afmetingen voor transport: 7400x2450x2250mm Machine-gewicht: 19000kg - Year: 2007 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 12precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  Nodpferuwb Aex Aanjlk - Automatic lubrication system - Dual camera

Condition: used, Year of construction: 2019, operating hours: 21,330 h, Type of fuel: Electric Empty weight: 3.432 kg Dimensions (LxBxH): 200 x 120 x 260 cm Lifting capacity: 1.600 kg Lift height: 605 cm Clearance lift height: 206 cm Fork dimensions: 1.200 x 1.000 mm - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516221V01609 - Operating hours: 21330 - Lifting capacity: 1600kg - Lifting height: 6050mm - Overhead clearance: 2600mm - Free lift: 2060mm - Fork length: 1200mm - Maximum fork width: 1000mm - Minimum fork width: 330mm - Number of wheels: 3 Wheels - Attachment: Fork positioner, Side-shift - Options: Non-marking tires, Full cabin, Free-lift, Heating, Joystick, Work lights - Mast: Triplex - Inspection valid until: 09.2025 - Drive: Electric - Brand/Type: Smart - Battery year of construction: 2019 - Capacity: 625Ah - Battery voltage: 48V Nledowl Ak Aspfx Aansk - Transport dimensions: 2000mm x 1200mm x 2600mm (l x w x h) - Transport weight [kg]: 3432kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2019, operating hours: 22,269 h, Type of fuel: Electric Empty weight: 3.413 kg Dimensions (LxBxH): 210 x 115 x 250 cm Lifting capacity: 1.600 kg Lift height: 605 cm Clearance lift height: 218 cm Fork dimensions: 1.200 x 1.030 mm - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516221V00132 - Operating hours: 22269 - Lifting capacity: 1600kg - Lifting height: 6050mm - Overhead clearance: 2500mm - Free lift: 2180mm - Fork length: 1200mm - Maximum fork width: 1030mm - Minimum fork width: 320mm - Number of wheels: 3 Wheels - Attachment: Fork positioner, Side-shift - Options: Work lights, Non-marking tires, Joystick, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12.2025 - Drive: Electric - Brand/Type: Smart - Battery year of construction: 2019 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 2100mm x 1150mm x 2500mm (l x w x h) - Transport weight [kg]: 3413kg - Transport packages [pcs.]: 1 Financial information Nlodpfxswp E Dys Aanok VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom