Used Trumicro 7050 for sale (53)

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disk laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies, even at high frequencies. This allows you to remove layers and contaminants at maximum speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining a constant pulse duration. The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for the efficient and economical cleaning of tire molds. Large-area applications with high average power Ablation, cleaning, annealing: The lasers of the TruMicro Series 7000 demonstrate their full potential in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous layer removal rates. A scanner ensures excellent power utilization. Flexible laser light cables transport the light to its intended destination and facilitate laser integration. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System Input Power: 380–460 VAC, 3-phase Laser Power: 750 W Wavelength: 1030 nm Pulse Energy: 80 mJ Pulse Duration: 30 ns Beam Quality: 20 mm Repetition Rate: 5 to 100 kHz Fiber Diameter: 400 µm Hfsdpfxexaktlo Aqgjl IP Rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 40 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold Hfedpfxozxy Szs Aqgel • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 40 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: excellent (used), Year of construction: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Specifications Clamping force: 11,000 kN Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Mould height: 400 – 1,200 mm Variant A: Reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Screw diameter: Ø105 mm Hjdpfjw U Tcmox Aqgofl L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Injection weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle type, pneumatically actuated shut-off, HP1.1 type, Ø12 mm orifice, M30×2 thread, adapter for ENGEL; no standard nozzle supplied Injection Unit Two injection cylinders with compact design M3 plasticising barrel, bimetallic, corrosion and wear resistant, operating temperature up to 350°C S4V screw Ø105 mm, heat-treated, nitrided, chrome plated, with hardfacing; R9 non-return valve 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper with a capacity of 300 l and magnetic grid Clamping Unit Hydromechanical, two-platen system Four high-pressure short-stroke cylinders on nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonal assembly) Special platen design – horizontal and vertical knockout holes Mould cooling: 10-fold rotameters (0-30 l/min), total of 20 circuits (10 per platen) Variant A: Reduced minimum mould height to 400 mm, maximum daylight maintained (2,400 mm), and increased opening stroke

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit Hodpfxoy Ukfme Aqgjfl 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: Hfodpozu S Uaofx Aqgol • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment Hfjdpfx Asx Nr R Hsqgjl • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2012, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, input voltage: 220 V, Equipment: auto duplex, brochure finisher, RISO COMCOLOR 7050 with Multifuntional Finisher and Scanner. It is on a very good condition . Only 701.000 color print and 430.ooo black. Print heads has no lines , it comes from a general maintained. Inks are about 50-60%. General: - The device is excellent, in full working function. All its systems and print head are working perfect. No lines. Hfodpfxjx E T Tuj Aqgel - A general technical service take place few weeks ago. - we can ship it worldwide, after secure its systems inside and store it on a 2 standard europallets 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 9,806 kN, screw diameter: 105 mm, displacement volume: 4,160 cm³, opening stroke: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! Engel injection moulding machine with Engel ERC 83/2 - CL robot! TECHNICAL DETAILS Clamping force: 1,000 tons Screw diameter: 105 mm Injection volume: 4,160 cm³ Locking force: 1,100 tons Opening stroke: 1,100 mm Tie bar spacing: 1,400 x 1,150 mm MACHINE DETAILS Number of heating zones: 7 Pump drive power: 130 kW Machine weight: 64 t + 18 t Hfjdpjy Ew Aaefx Aqgjl EQUIPMENT Engel ERC 83/2 - CL robot Separate control cabinet Note: For the purchase of multiple items from the same location (see offers below), you will benefit from reduced costs for dismantling and loading.

Condition: excellent (used), Year of construction: 1999, Engel ES 7050/1000 K Clamping force: 1000 tons Year: 1999 Screw diameter: 105 mm Hfsdpfx Ajxvc Sleqgsl Injection volume: 4160 cm³ Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Locking force: 1100 tons Opening stroke: 1100 mm Min-max mould height Tie bar spacing: 1400x1150 mm Machine weight: 64 tons + 18 tons Plus Engel Robot Type: ERC 83/2 - CL Year: 1999 Separate control cabinet

Condition: good (used), Year of construction: 2003, pad printing machine, NIR POWER TC 24, year: 2003, Preis: 1.900 Euro, price: Mr. Rainer Eckerle Hsdpfx Aqed Ai Hkogsfl

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,270 h, load capacity: 5,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, gearing type: automatic, tire condition: 100 %, overall weight: 6,800 kg, total height: 3,050 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, cabin, lighting, sideshift, Still RX 70-50 forklift Load capacity: 5000 kg Year of manufacture: 2019 Hsdpfx Ajzzwuxoqgefl Fuel type: LPG Heated cabin Lifting height: 4450 m Mast type: Triplex, 3050 mm Side shift Fork length: 1200 mm New front and rear tires Hours: 9270 Forklift has undergone an oil service. UDT certified. Option to install a fork palletizer or a fork positioner. Warranty included.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 3,881 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,590 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Camera, Hfjdpjzz D Hhsfx Aqgel Side shifter, 3rd valve, heater, full cabin, dual tires.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 15,06,02,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen Hsdpez Ap S Sefx Aqgsfl ATTACHMENTS Sideshift Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos Hfodpfx Aqsy D Hhvogel -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Condition: good (used), Year of construction: 2013, operating hours: 6,405 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, empty load weight: 6,037 kg, mileage: 6,405 km, Triple diesel forklift Make: Still (Germany) Hodpjzv D Dpjfx Aqgjfl Year of manufacture: 2013 In good condition! Capacity: 5,000 kg Lifting height: 5,080 mm Mast lowered height: 2,500 mm 6,405 operating hours Equipped with FREELIFT, SIDESHIFT, and FORK SPREADER Watch the video on YouTube.

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 7,270 mm, total length: 5,670 mm, - Tragfähigkeit: 4999 kg - Lastschwerpunkt: 500 mm - Lastabstand 540 mm - Achslast mit Last vorn 10468 kg - Achslast ohne Last vorn/hinten 2956/3635 kg - Reifengröße vorn: 355/45-15 - Reifengröße hinten: 250-15 - Räder Anzahl vorn/hinten: 2x/2 - Spurweite: vorn Einfachreifen 1210 mm - Spurweite: vorn Doppelreifen 1364 mm - Spurweite hinten 1120 mm - Neigung Hubgerüst/Gabelträger, vor/zurück 3/7 Grad - Sitzhöhe: 1298 mm - Kupplungshöhe: 496 mm - Gabelträger: Kategorie 3 / Forma A - Arbeitsgangbreite bei Palette 1000 x 1200 quer: 4470 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs: 4670 mm - Wenderadius: 2730 mm - Kleinster Drehpunktabstand: 746 mm - Fahrgeschwindigkeit mit/ohne Last 20/20 km/h - Hubgeschwindigkeit mit/ohne Last min. Lüfterdrehzahl 0,50/0,53 m/s - Senkgeschwindigkeit mit/ohne Last 0,50/0,50 m/s - Steigfähigkeit mit/ohne Last />30 % - Betriebsbremse mechanisch - Motorhersteller/Typ Deutz/TCD 2,9 L4 - Nenndrehzahl: 2200 1/min Hsdpfx Aezttaujqgofl - Max. Drehmoment 260 Nm - Anzahl Zylinder/Hubraum 4/2900 cm³ - Arbeitsdruck für Anbaugeräte 250 bar - Ölmenge für Anbaugeräte 30 l/min - Anhängekupplung Bolzen

Condition: used, Year of construction: 2017, Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Hodpfx Aqjk Aa Dtsgefl Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 500 mm Side guide: steel sheet outside Drive: SEW gear edgear motor Drive position: external pulling Weight: 120 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Hfedpfx Aqezv Duujgel Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Condition: excellent (used), mileage: 5,17,050 km, power: 355 kW (482.67 HP), first registration: 01/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power assisted steering, retarder, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Leaf spring suspension - Roof spoiler - High beam headlights - Speed limiter - Intarder - Air conditioning - Air suspension - Air horn - Particle filter - Radio/CD player - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Bumpers in body color - Auxiliary heating system = Notes = DAF XF 480 Intarder 2 tanks 517,050 km 2020 Smart Tacho 2 Leaf/Air suspension Auxiliary air conditioning 2 sleeping berths Refrigerator Heated seats Air conditioning ACC (Adaptive Cruise Control) Cruise control Lane keeping assist Automatic transmission Euro 6-D 4x2 TÜV/MOT/APK valid until 02-2027 Belgian truck *From first owner* Chassis number: XLRTEH4300G302535 Video of the vehicle (YouTube): EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit registration/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for more information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, Automatic Axle Configuration Axle brand: GOOD YEAR Brakes: Disc brakes Hedszv D Hwepfx Aqgofl Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Tire tread left: 55%; Tire tread right: 55%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80R22.5; Double tires; Differential lock; Max. axle load: 13000 kg; Tire tread left inner: 65%; Tire tread left outer: 65%; Tire tread right inner: 65%; Tire tread right outer: 65%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,597 kg Payload: 10,403 kg GVW: 19,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02.2027 Technical condition: very good Optical condition: very good Further Information Please contact Olivier Geerts or Edwin Geerts for further information.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,040 h, load capacity: 5,000 kg, lifting height: 3,680 mm, fuel type: diesel, mast type: telescopic, construction height: 2,680 mm, fork carriage width: 1,300 mm, fork length: 2,100 mm, empty load weight: 7,243 kg, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/50-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Hfodozmzt Aspfx Aqgel Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, interior mirror, joystick, rotating beacon, windshield wiper, single-pedal control, LED, seat.

Condition: used, Ceramic backings for wire electrode, welding wire, welding wire -Weight: 10.2 kg -Number: 1x packages available -Price: per package -Weight complete: 10.2 kg/package Hedpfsd Idwfex Aqgofl

Condition: good (used), Tool holder, milling tool holder -Recording: SK50 Hfjdpob D I Dcsfx Aqgjl -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 28 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Condition: good (used), Tool holder, milling tool holder Hjdpfx Aob D I Dueqgofl -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 8 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Condition: excellent (used), Here we offer an LDS cooling fan. LDS blower. Hjdpfezfg Ntex Aqgefl Maximum speed: 2900 RPM. Power supply: 415V 3PH 50Hz. Type: V870 50Hz. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS cooling fan. LDS blower Maximum speed: 2855 RPM. Power supply: 415V 3PH 50Hz Hfsdpfezfg Nmsx Aqgol Type: V870 50Hz Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.