Used Metal Band Saw for sale (41,595)

Condition: excellent (used), Cutting height 42cm-56cm Cutting width 20cm-40cm Engine 20 HP Gijdpfjv Eurajx Ah Hel Belt width 110mm Belt length 6520mm

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm Gisdpfx Ajhhzl Heh Hel 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Gijdpfxettbf Rs Ah Hel Technical data: Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Gisdpfxjx Rvb Sj Ah Hel Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2003, overall weight: 1,100 kg, working height: 700 mm, Double column bandsaw Brand: SABI Model: PBS 320-450 Year: 2003 The Sabi PBS 320 bandsaw is a semi-automatic double column machine designed for metal cutting. Below are its technical features: Cutting capacity at 90°: Round: up to 320 mm diameter. Rectangular: up to 320 x 285 mm. Round: up to 280 mm diameter. Bandsaw blade dimensions: Length: 4570 mm. Width: 34 mm. Thickness: 1.1 mm. Cutting speed: adjustable between 15 and 105 m/min. Main motor power: 4 kW. Working height: 700 mm. Jaw height: 175 mm. Machine dimensions: Length: 2180 mm. Width: 900 mm. Height: 1525 mm. Weight: approximately 1100 kg. These specifications make the Sabi PBS 320/450 a robust and versatile choice for cutting operations in workshops and industrial environments. Gisdpfx Ajx Tg Uneh Hjl

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 3699, cutting width (max.): 1,300 mm, cutting height (max.): 275 mm, working height: 1,100 mm, saw drive: 45,000 W, Bandsaw for splitting BSH / glulam beams. Working width 1300 mm, cutting height 275 mm; motor power 45 kW; feed speed 3-15 m/min, extraction port diameter 200 mm, including electrical cabinet and control panel, including hydraulic unit. An additional shifting frame with a short bridging roller conveyor for removing the machine from a production line is also available as an option; in this case, the working height increases to 1,300 mm. Gijdpfx Aex Tud Dsh Hol

Condition: ready for operation (used), Year of construction: 2007, Manual light metal circular saw Metallkraft LMS 400 Gsdpfx Ajx Tz R Deh Heil - Working condition - Year of manufacture: 2007 - Spare saw blade included - Can be tested on-site under power - Shipping via freight company available at extra cost - On-site loading with forklift - Invoice with VAT included

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min Godpfx Aeivuqteh Hsil total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: good (used), Year of construction: 2009, functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Gjdov T Tglspfx Ah Hjil Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) Gisdpfjfk Ew Esx Ah Hel • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 2019, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – Sale to the highest bidder. Lot 2910010: Gjdpfex N Nigjx Ah Hsil Lot consisting of 1 used single mitre saw with conveyor belt in good condition. Shows minor signs of use and is suitable for precision cutting operations with pneumatic clamping and automatic feed assistance. Mitre saw: Elumatec TS161/21, year of manufacture 2019. Motor power: 1100 W, 4100 rpm. Feed system: Ruchser RU-LAP3 conveyor unit, 1.5 kW, 50 kg/m load capacity. Electrification: 400 V (saw), 230 V (RU), 50/60 Hz, 3.0 A + 4.5 A. Pneumatics: 7 bar air pressure, pneumatic clamping. Accessories: Integrated control panel, conveyor frame, length stop.

Condition: like new (used), Year of construction: 2009, I sell the vertical band saw Felder Hammer N4400. Motor power 3,0KW Suitable for saw bands up to 35mm. Godpfx Aer Alyksh Hjil Table tilting. Year 2009 Condition very good. Available immediately.

Condition: new, total height: 4,700 mm, cutting width (max.): 1,100 mm, overall weight: 19,000 kg, power: 90 kW (122.37 HP), saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Godpfx Ajrlm N Ush Hjil

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder Gsdpfst I D Tuex Ah Hsil - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Gisdewuqbbopfx Ah Hsl Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Gjdjw D Aybjpfx Ah Hjil

Condition: new, incl. Giedpfx Ajd Tb N Ajh Hjl Hydraulic lifting of the saw frame with check valve Micro dosing unit Available with or without laser light for cut line indication Metal band saw for straight and mitre cuts, continuously adjustable from 30° - 45° - 90° - 45° - 30° according to scale Swivel axis remains unchanged at any angle setting, therefore precise length measurement at 90° and in the mitre range. Cutting speed: 35 and 75 m/min, pole-switchable Cutting capacity 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Alternatively available in "HS" semi-automatic version: - Hydraulic lifting of the saw frame - Hydraulic material clamping/short stroke - Rapid approach lowering to material top edge The following options are recommended: Micro-spray system Laser light Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc.

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Giedpfx Ahjricwqe Hol Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: Giedpfx Aoxz Hhzeh Hjl -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm, band guidance above and below, tiltable table Storage location: Supplier Gisdpfx Ahsw D Aw He Hol

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Gedpfet D Azcex Ah Hjil Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Condition: new, total height: 2,210 mm, cutting width (max.): 1,000 mm, overall weight: 7,000 kg, power: 22 kW (29.91 HP), saw blade length: 7,200 mm, The HTZ 1100 PRO is a fast, versatile band saw. Suitable for either production or quality oriented sawmills, who are looking at lowering their operation costs, while increasing quality of sawn wood and production. Gsdpfsrllanjx Ah Hjil

Condition: new, cutting diameter 220 mm saw band length 2450 mm cutting width 250 mm cutting speed 40 / 80 m/min dimensions of saw-band 2450 x 27 x 0,9 mm 100 mm 90 mm 90 x 90 mm 160 mm 160 x 110 mm 250 x 190 mm total power requirement 0,75 / 1,1 kW table height 925 mm weight of the machine ca. 218 kg dimensions of the machine ca. 1300 x 700 x 1530 mm Godpfxslb I A Se Ah Hjil

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm Gedpfx Aholb I Dao Hoil capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: used, Year of construction: 2005, cutting diameter 178 mm saw band length 2265 mm cutting width 225 mm dimensions of saw-band 2265 x 20 x 0,9 mm band speed 30 / 60 m/min capacity 90 degrees: round 178 mm capacity 90 degrees: flat 225 x 110 mm capacity 45 degrees: round 140 mm Godpferzwwrox Ah Hsil capacity 60 degrees: round 85 mm total connected load 0,75 kW weight of the machine ca. 165 kg dimensions of the machine ca. 1100 x 700 x 1650 mm Furnishing: - Coolant device - band saw blades