Used Metal Lathe Machine for sale (65,454)

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workpiece block: 70×70 mm Min. machinable block: 20×20 mm Max. machinable length: 300 mm Min. working length: 25 mm CE mark Csdpfjyxqc Hex An Ujrc

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Crjdjfhb N Sopfx An Usc Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Condition: excellent (used), Series 12-225-WRD 1st station sanding belt for removing burrs and laser spatter 2nd station disc for light edge rounding Pass-through width 225 mm Codjymlfdjpfx An Usrc incl. TEKA extraction system

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. Credpfex Uwlasx An Uec 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: new, Massive Cast Iron Legs for Lathe / Workbench – NEW & Extremely Sturdy For sale are 2 heavy-duty, high-quality cast iron legs, the perfect base for lathes, workbenches, or other machinery. The solid construction ensures maximum stability and minimal vibrations – ideal for precision work. With their robust cast design, these legs are virtually indestructible and suitable for professional use. Condition: - New & in original packaging - Unused, including accessories (see photo) Csdpsyzd Injfx An Usrc Technical data: - Weight: 31 kg per leg - Height: 80 cm - Width (bottom): 50 cm - Width (top): 25 cm - Thickness (bottom): 10 cm - Thickness (top): 15 cm Features: - Adjustable leveling feet included → perfect compensation on uneven floors - Threaded holes on top incl. mounting bolts - Sturdy, well-designed construction with bracing for extra rigidity - Highly adaptable: simply mount a wooden board or machine table if desired Ideal for: - Lathes - Heavy machinery - Workbench projects - DIY or industrial-style furniture Shipping / Collection: - Collection preferred - Shipping via freight forwarding available The legs are located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: cast feet, machine base, lathe stand, workbench legs, industrial feet, machine feet, cast frame, workbench subframe, heavy-duty supports, metal feet

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled Cedpsudb R Ijfx An Uerc and profiled parts Weight: 6200 kg

Condition: new, Year of construction: 2026, Machine for machining various internal and external surfaces, mainly keyways. Widely used in repair shops and tool shops, in single and small batch production. Machine for machining various internal and external surfaces, designed for precise work, especially grooves. It is widely used in overhaul shops and tool shops, both in unit and small batch production, making it a versatile tool for various industries. Main features of the machine: Hardened and ground guides: ensure maximum durability and precision, guaranteeing longevity and high quality machining. Tilting chisel head of +/- 30°: Allows flexibility in machining surfaces at different angles, increasing the versatility of the machine. Built-in lubrication system: Automatic lubrication of the workpieces, which reduces friction, increases machine life and minimises the need for manual maintenance. Adjustable stroke speed per minute - 6 settings: Allows the speed to be adjusted to suit the specific material and type of machining being carried out, improving accuracy and efficiency. This machine is ideal for both small batch production shops and those that need high precision when overhauling or reconditioning tools. Thanks to modern features such as the ability to adjust the speed, users can easily adapt the operation of the machine to their individual needs, increasing efficiency and saving time. Technical specifications Maximum stroke 125 mm Minimum number of strokes 60 / min. Maximum number of strokes 350 / min. Number of speed steps 6 Head rotation 90º Table dimension 500x200 mm Table travel X/Y 220 mm Z axis travel 200 mm Motor power 0.37 kW Overall dimensions 800 x 750 x 1550 mm Codpouyhxmsfx An Uerc Weight 290 kg Knife shank dimensions Ø 10 / Ø 16 mm or 16 mm square shank

Condition: good (used), In good technical condition and fully functional. Credoy Hr R Ijpfx An Uoc Year of manufacture: 1981 Max. working length: 3000 mm Max. sheet thickness: 25 mm

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses Crjdpfx Aoywhvnen Uec - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: Cedpfxeiwa Ias An Usrc total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Crodjytpy Sjpfx An Uec Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Working width: 2540 mm Cjdpfx Asytparsn Uerc Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: complete production line for rotors and stators, including full assembly of the corresponding motors. Some of the brands/models: Promotech, Stihl, etc. Machines on the stator line include: stator core press, stator insulation insertion machine, dispensers for insulating plastic, stator winding machine, machine for cutting excess wire, tab welding machine, stator inspection station. Crsdpfxjy Ddrrs An Usc Machines on the rotor line include: rotor core press, rotor insulation insertion machine, commutator press-fitting machine, rotor winding machine, rotor testing (rototest). Additionally: rotor varnishing machine, finishing operations (lathe for commutator and rotor core machining), balancing machine, cutting/sawing machine, rototest. Also includes: assembly line for complete motor assembly, DAKS device for motor testing, conveyor belt, packaging unit. For more pictures, detailed information, or any inquiries, we are at your disposal.

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Crsdpjrklxvofx An Uoc Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Crjdpfx Aneuzv Tzj Uec Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Crodpoxn Nqlofx An Uec

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Credjx Sz D Ijpfx An Ujc

Condition: used, Machine is in fully working condition. Cedpfx Ajhm S Dgen Uorc

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Passage of main spindle ----- 38 mm Bed width ----- 203 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 KW Crodpfx Anoq E Iyzo Uec Weight ----- 880 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 200 mm * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: used, EMAG VL 4 is a machining cell / vertical lathe engineered for high-precision work, exceptional accuracy and production reliability. Capacities: 2 machines, 2 axes; max workpiece dimension 200 mm; Z travel 400 mm; X travel 750 mm; turret 12 positions with 12 driven tools. Specs: spindle speeds up to 6000 min-1 with stepless control to 4500 min-1; spindle power 25/18 kW; torque 280/202 Nm; supply 3x400V 50Hz; total power 36 kW; footprint L5300×W2300×H3650 mm. Equipment: chip conveyor, automatic loading/unloading, set of toolholders, status light, spare parts. Achieves tight tolerances; suited for automotive, aerospace, machine tools and medical. Cjdpfx Ansyxnyvo Usrc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,060 mm, sheet thickness (max.): 150 mm, total length: 2,640 mm, total width: 1,905 mm, total height: 2,090 mm, overall weight: 3,200 kg, table width: 1,060 mm, workpiece height (max.): 150 mm, power: 25.2 kW (34.26 HP), input current: 52 A, The budget-friendly entry-level model, yet equipped with all necessary functionalities. With a working width of up to 1060 mm, the machine combines deburring, edge rounding, and removal of laser oxide in a single pass. • Table width 1060 mm Credpey Icrrefx An Usc • Maximum workpiece height 150 mm • Deburring and edge rounding in one pass • Abrasive belt • 2 x 2 top brushes • Pressure rollers before and after each unit Operator-friendly control via touchscreen. Ex-showroom machine!

Condition: used, L + Z Lathe TONGIL- SAEILO Type TIPL-4SP Machine No. 00570319 Year of manufacture: 1985 Centre distance: 1000 mm Crjdjx Urbvopfx An Uoc Swing over bed: 400 mm Swing over cross slide: 210 mm Centre height over bed: 200 mm Centre height over cross slide: 105 mm Spindle bore: 58 mm Spindle speed: 55 - 1600 rpm, 16 steps Feed: Longitudinal and cross Tailstock taper: MT4 Chuck flange: Camlock, taper size 6 Motor power: 4 / 6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear stages - 3-jaw scroll chuck RÖHM Ø 200 mm with stepped jaws - Multifix quick-change tool post size B with 2 exchangeable tool holders - Spindle brake via mechanical foot pedal - Coolant system - Emergency stop - Machine lamp Space required (L x W x H): 2250 x 1050 x 1220 mm Weight: 1500 kg

Condition: like new (used), Year of construction: 2026, functionality: fully functional, working width: 1,300 mm, The SRS 1300 is an industrial finishing machine for sheet metal that integrates deburring, edge rounding, and surface finishing in a single pass, optimizing the process after laser or plasma cutting. ⚙️ Main technical features Working width: 1300 mm Configuration: 2 abrasive roller heads 4–8 rotating brushes Installed power: 39 – 88 kW Materials: steel, stainless steel, aluminum, brass Working thickness: approx. 0.5 – 50 mm 🚀 Performance Complete process in a single pass Removal of burrs, oxides, and slag Homogeneous edge rounding Line grain or non-directional surface finish Csdpfx Aoyz Tdljn Usrc Parts ready for painting, welding, or coating High repeatability and reduced manual work

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € Crjdpfx Aoynmw Rsn Uec 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW Credpfxoynmwks An Uoc 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.