Used Milling Machine Universal for sale (84,781)

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Ledpfx Aovvnfueaneak Machine vice etc.

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) Lsdpoxy Stysfx Aanoak - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Laodpfoxy Ntqsx Aansk Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: new, Year of construction: 2025, functionality: fully functional, TECHNICAL DATA TABLES: Fixed angular table: Working surface dimensions: 840 x 390 mm T-slots: 5 / 14 x 63 mm Max. table load: 200 kg Vertical table: Working surface dimensions: 950 x 250 mm T-slots: 3 / 14 x 63 mm Travelling distances / feeds: Axis travel: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Feed rates: stepless - Range (X, Y, Z): 0 - 600 mm/min. Rapid traverse - X, Y, Z axes: 600 mm/min. Horizontal spindle: SK 40 Distance spindle centre / table: 95-475 mm Speed range, 12 steps: 50-2600 rpm Gear stages: 12 Lasdpfox E Tldjx Aanek Tool clamping - DIN 2080 manual Vertical milling head: SK 40 Distance spindle nose / angular table: 90 - 470 mm Distance spindle centre to column min./max.: 150/370 mm Speed range: 50 - 2600 rpm Gear stages: 12 Head swivel: +- 90° Quill travel, manual: 100 mm Tool clamping - DIN 2080 manual, M16xP2.0 Motors: Main drive power: 2.2 kW Feed motor power X-Y-Z: 0.35 kW CURRENTLY on order: Delivery time approx. 5 months // Subject to prior sale

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Ljdpforb A Tcex Aanoak Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t ja Ljdpfxjxzuz Ns Aaneak more pictures available

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools Lodpfx Aasvanqxoneak

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Lsdoxylqropfx Aansak Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Lajdpovxllkefx Aanjk Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Laodexfkm Aopfx Aanok Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Laodpfxoit Tr To Aanok Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Ljdpfx Aaeghtvaenoak Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm Laedowwwqhspfx Aansk turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: used, Year of construction: 2000, functionality: fully functional, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X850 Y290 Z475 mm. Table size: 1250 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 7,5 HP. Digital readout: Electronica EL403M (X, Y & Z) Year: 2000 Laedpfex Ex Siex Aansk Country of origin: Spain. Size (L x W x H): 2050 x 2220 x 2050 mm. Weight: 1900 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout. With Hurré milling head and supports. All our machines are tested and serviced before delivery.

Condition: good (used), Internal item no.: 25094 Universal milling machine Deckel FP1 + Accessories (machine vice / dividing head / SK40 tool holders / tailstock) The milling head is equipped with an M16 drawbar + Additionally, S20x2 drawbar Laedpfxexxkwns Aansk The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 Laodow D Hmljpfx Aanek - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Lsdewyit Hopfx Aanjak Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min Lsdpfotqqmhsx Aanoak rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm Laedpfx Aaexwzf Honek z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter

Condition: used, Year of construction: 1989, Universal Milling Machine ALCERA type 100 M Laedpfxsx Ekafe Aanjk Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

Condition: used, Year of construction: 1991, Table size 2000 x 450 mm X/Y/Z - 1250/430/510 mm Spindle taper ISO 50 Spindle speeds 28-1400 rpm Equipped with: Laodpfx Aasxv Shvonok 3 axis dro 2 pcs. arbor support 5 long arbors 2 pcs. vices 15 pcs. tool holders

Condition: good (used), functionality: fully functional, Universal Milling Machine Dufour 194 Made in France 🇫🇷 Laodpfxexzlb To Aanjk In excellent condition Table dimensions: 1200 x 250 [mm] Travel: X: 825 mm Y: 290 mm Z: 410 mm Spindle taper: SA 40 Spindle speeds: 34-2000 Weight: 2 tons

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Lajdpfx Ajwrzkzsansk Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Hello, Universal milling machine FY-321 for sale. The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00. Lasdpfxexykbis Aanok

Condition: good (used), Hello, For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. The machine is fully operational and in continuous use; inspection and testing on site are possible. Lodpfxexyi Ste Aaneak The price listed in the advertisement is net and is subject to VAT. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.