Tool Room Milling Machine - Universal

DECKEL FP 1 aktiv

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and continuously variable feed, in very good condition, CE compliant. Technical data: >> Year of manufacture: 1987, Machine No. 2102-3562 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 3 axes >> Rapid traverse in 3 axes Kedpfxezl Eife Aafslw >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel ranges X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list >> Tool holders, vise, counter holder About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is continuously adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture. Ksdpfjx S Edlex Aafelw

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm Kodpszl Ebbofx Aafjlw >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment. Kedezlnmmopfx Aafolw

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Kedjv Ipvxopfx Aafelw

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes Kledpfx Aajziny Iefow - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: good (used), Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW Kledjzfql Sepfx Aafjw weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice - Work light

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Kledpfovzmtzjx Aafjw Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Kedpfexwunzjx Aafjlw

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Klsdpjzbb E Aofx Aafjw Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Ksdpfxsmw Ukce Aafslw Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Kljdpfx Aotp Nyfsafow

Condition: used, Year of construction: 1987, Deckel FP1 with active 3-axis Heidenhain digital display, 3-axis active, fixed table, SK40 S20x2 spindle mount. Central lubrication, operating manuals. Good, ready-to-use condition. Can be demonstrated under power by arrangement. Ksdezbykwopfx Aafslw

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion Kedpfx Aaslkgvbsfelw feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC Kjdpey Tlwuofx Aafslw X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm