Used Mortise for sale (234)

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Configuration 1. BodorPower 12 kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch touchscreen monitor Dcjdpfx Aoxv D T Rjptel 10. Automatic cutting gas pressure adjustment 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-searing mineral cast 14. Bodor Mango® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Smart maintenance reminder 17. Wi-Fi internet connection 18. Water cooling 19. Exhaust system 20. Wear parts kit CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm Total machine rated power: 52.2 kW Total machine rated current: 99.1 A Average power consumption: 29.8 kWh OPTIONAL: LANTEK EXPERT II CUT software, including post-processor

Condition: new, Year of construction: 2026, table length 4000 mm table width 2000 mm burner heads 1 Control CNC workpiece weight 2510 kg traversing speed 200 m/min dimensions of the machine ca. 11599 x 3380 x 2718 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function Dodpfx Aowh Ukyeptscl 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 20 mm

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source Dodpfox I Sglox Aptjcl 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: like new (used), functionality: fully functional, planing width: 400 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Italian, in excellent condition! Griggio PF 400 Planer! Small, 4-knife, stable! SUPER Manufacturer! Perfect condition! TECHNICAL SPECIFICATIONS: - Table length 2500 mm - Working width 400 mm - 4 traditional knives - 3kW motor Dcsdpfx Aezx A Nceptol - Shaft RPM 5000 - Shaft diameter 120mm - Both tables adjustable - Stable, solid fence - Shaft noise reduction system Machine dimensions: - Length 250 cm - Width 70 cm - Height 100 cm - Weight 550 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines: band saws, circular saws, crosscut and miter saws, thicknessers, planers, sanders, horizontal and vertical drilling machines, feed systems, sharpening machines, four-sided planer, 4-sided, 3-sided, three-sided, two-sided, thicknesser, planer, sander, jointer, planer-jointer, planer-thicknesser, jointer-thicknesser, cleaning machine, mortiser, dowel machine, parquet machine, trimming machine, rounding machine, for log homes, milling machine, milling machines, spindle down, spindle up, top, bottom, sanders, wide belt, narrow belt, throughfeed, cylindrical, disc, angle, planer, drill, drills, horizontal, radial, milling machine, multi-spindle, edge banders, edge banding machine, veneer machine, press, presses, lathes, log splitters, briquetting machines, briquette machine, chippers, chipper, wood chipper, boring machine, boring machines, dust extraction, dust collectors, extractor, extractors, fan, fans, sharpener, sharpeners, compressor, compressors, sharpening machines, multi-functional.

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT Dedpozx Alkefx Aptjcl We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Machine dimensions: - Length: 1700 mm - Width: 900 mm - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Djdpfozxyuvex Aptscl Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t Dedpeu Nfliofx Aptocl dimension machine approx.LxWxH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: excellent (used), Year of construction: 1995, MACHINE CONNECTED, WORKING IN GOOD CONDITION, POSSIBILITY OF TESTING - INCLUDED IN THE TOOL SET Dcsdpelc N N Uefx Aptol The Weinig UC 10 combined mortise, tenon and rebate machine for the flexible production of various windows, elements and doors without changing tools. Frame-by-frame production, serial or one-piece. - Units: 1. Cross cut saw: ø 40 mm, 3 kW 2nd tenoning and slotting spindle: clamping length: 320 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3rd profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4th profiling unit, horizontal from above, 3 kW, ø 40 mm, clamp length: 40 mm 5th profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6th profiling unit, vertical right, 3 kW, ø 40 mm, clamp length: 160 mm - Studio window unit - Slat conveyor with conveyor belt for automatic return transport to the operator - NC axis: feed height adjustment - Milling package THE MACHINE HAS 3 SETS OF TOOLS FOR WOODEN WINDOWS - PROFILES 68/78/92

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Dcedszbm Tfepfx Aptel Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 1,080 mm, number of slots in tool magazine: 4, total height: 2,354 mm, total length: 3,800 mm, total width: 3,050 mm, Equipment: CE marking, PADE TARGET – 5-Axis CNC Machining Centre with Additional C Rotary Axis Manufacturer: PADE, Italy Model: TARGET Year of manufacture: 2006 Condition: Used, fully operational Availability: Available for delivery November–December 2026 Technical specifications • 5 simultaneous CNC machining axes + additional controlled C rotary axis • Axes: X / Y / Z / A / B + C • C-axis rotary table usable during machining • X-axis travel: 1,600 mm • Y-axis travel: 1,675 mm • Z-axis travel: 1,080 mm • A-axis rotation: 360° • B-axis rotation: ±90° • Maximum working area: 1,600 × 1,100 mm • Machining head with 4 independent electro-spindles • Electro-spindles with ceramic bearings • Revolving machining head for rapid spindle/tool selection • Adjustable workpiece supports and clamping system • Suitable for routing, profiling, drilling, boring, mortising and tenoning • Particularly suitable for complex and curved solid-wood components, including chair, table and furniture parts Control system • Original WINMEDIA 93000635J industrial PC has been replaced by a standard PC • Machine is fully operational in its current configuration Dsdpfxszx S Afo Aptscl • Available for demonstration in operation prior to dismantling Machine description The PADE TARGET is a versatile CNC machining centre designed for complex machining of solid-wood components, particularly chair, table and other shaped furniture parts. The machine combines simultaneous 5-axis machining with an additional controlled C rotary axis, which can also be used during the machining process. Together with four independent electro-spindles, this configuration provides high flexibility for machining complex three-dimensional components from multiple orientations. The machine is in fully operational condition and is currently installed and in use. The original WINMEDIA 93000635J industrial PC has been replaced by a standard PC, and the machine operates normally in its present configuration. The machine can be inspected and demonstrated under in our production plant in Laktasi, Bosnia and Herzegovina. Available for delivery: November–December 2026.

Condition: excellent (used), Year of construction: 2018, Complete workshop, machinery for window production Conturex Weinig window production line Scm DMC sanding machine SY TM 1650 SCM Record 240 NT Weinig mortise and tenon press Laminated timber press Veneer press OMC Frame press Casolin Edge profiling machine SCM Dsdpfxszx Ti He Aptecl Painting system / spray booth Table saw Felder Table circular saw Felder Double miter saw Stop tables Ruchser Mullion machine Stegherr Sanding machine Kundig Sanding machine Löwer Drilling machine Ganner Dust extraction system Mion Mosole and many other machines

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder Dcjdpexdttijfx Aptel - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Dcjdpfxjff Hdmo Aptol Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Includes several slot mortising cutters Dodpfoyvv Ngex Aptjcl Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Dsdoih Dxlepfx Aptscl Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising Dsdpscnxa Nefx Aptocl torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Dedpfjhp Rcysx Aptscl Aluminum fence cheek

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Dcodjdqzh Tepfx Aptsl Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Dsdpfx Apjih Dxdetocl Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Dsdpfx Aod Hx Hmoptocl Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Dedji Dphtopfx Aptjcl Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: used, Bacci Morta-saw machine with 2 benches and 2 tips Overall dimensions: cm. 145 x 100 h. 140 Djdpfezg Hz Ssx Aptscl Approximate weight: Kg. 700

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm Dcedpfx Aozvmx Aoptsl - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Used Machine Features and Technical Specifications: - Lock case milling unit - Handle hole driller Djdpfx Apezlbn Djtjcl - Face milling cutter - Motor: 1.7 kW - 2,800 rpm - Includes accessories Location: 65439 Flörsheim Availability: Available immediately

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Dcjdjzxg Ivjpfx Aptol