Used Mortise for sale (222)

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Available immediately Hjdpfegiwl Dox Anyjt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Weight 700 kg Hsdpfev A Hydex Anyet Total power requirement 1,9 kw

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm Hodpsu Nfmyofx Anyet throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) Hedpjzpblkjfx Anyjt - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor Hodoy Saw Hspfx Anyet - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Hedpfx Anew I U Nhsyjt Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Scheppach Type St 12 rectangular drilling or mortising machine for drilling or mortising rectangular openings for doors, windows or similar applications. Hodoztvxmspfx Anyst Technical data: - Number of chiselling units: 1 - Motor power: 0.37 kW - Mains voltage: 230 V - Chiselling width: 6 x 6 mm

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm Hjdeu Nfvujpfx Anyet mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm Hedpfxsw D Awms Anyjt mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t Hodpfx Anju Nfizsyjt dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Hjdpfx Asvwf H Ejnyst

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine Hjdoxw Ty Nepfx Anyot - E-LAB programming system, automatic trajectories manager Main functions: - Mortising - Drilling - Milling - Cutting - Tenoning

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm Hedpfxeywnuwe Anyst - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Hjdpsvwfrzofx Anyst

Condition: used, Tubular frame lock, locking body, door fitting, mortise lock, escape door lock, panic mortise lock -Manufacturer: BKS, mortise lock panic mortise lock, unused Ovp -Type: B-21160-02-R-8 Hjdpfxetzrf Sj Anyst -Number: 4x mortise lock available -Price per piece -Dimensions box: 240/140/H30 mm -Weight: 0.9 kg/piece

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. Hedpfxju Nfi Us Anyst *

Condition: good (used), Code: 0451 Brand: MCN - ITALY Model: JUNIOR - CE Standard Bit mortising machine for furniture, joinery, custom-made furniture, doors, shelves and various – CE standard Technical data: Table length 530 mm Table width 230 mm Hjdpfxszm Slpj Anyst Table height from floor 800 mm Max groove length 200 mm Max groove depth 150 mm Vertical spindle stroke 200 mm Spindle attack 16 mm Spindle 2800 rpm Motor power 2 Hp Pneumatic clamping device for workpieces Weight kg 160

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Hjdpfx Ansyxzacsyst

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. Hedsv H D Tvopfx Anyot You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted.

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m Hjdpfx Anju Nfiboyot This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Hedpfx Asytc N Honyst Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools

Condition: as good as new (ex-display), Exhibition Machine Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø260 mm with under-table extraction. Milling fence 250 mm. Slot mortising table with Westcott collet chuck, Mori safety device. Exchangeable milling spindle with MK4 mount, made in EU! Jointer unit: Table width 410 mm Table length 1800 mm Cutterhead diameter 100 mm Number of cutter knives 4 pcs Cutterhead speed 4500 rpm Motor output 5 kW (S6) (4 kW S1) Thicknessing unit: Thickness capacity min/max 4 – 225 mm Feed speed 8 m/min Spindle moulder: Usable spindle length 125 mm Spindle height adjustment 175 mm Motor output 5.5 kW (S6) (4.5 kW S1) Max. tool diameter: For profiling 250 mm For tenoning 300 mm Spindle speeds 10000/8000/6000/5000/4000/3000 rpm Table openings 260 mm Hodpfx Aswzzguenyet Circular saw: Sliding table length 3000 mm Saw blade diameter min/max 315 mm / 250 mm Tilting range 90° - 45° Max. cutting height 90° / 45° Saw blade 315 mm 103 / 72 mm Motor output 5 kW (S6) (4 kW S1) Weight 1090 kg Slot mortising table: Table size 300 x 500 mm Drilling length 250 mm Drilling depth 210 mm Height adjustment 160 mm

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, Hedpfx Asyy Nl Nenyjt knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: new, I sell the combined surface planing - thicknessing machine with spiral head and mortising machine VITAL FS41NSD. New machine. Max. working width 410mm 3-line spiral knives spindle 410x100mm Main spindle + Feeding motor 4,0 KW. Total weight 420kg. With additional mortiser with positioned table. Surface planer: Max. construction cutting take-out 5mm Table dimensions 1800 x 410 mm / 900 mm input + 900 mm output Aluminium fence dimensions 1100 x 155 mm / adjustable 0–45°. Thicknesser: Max. construction cutting take-out 4mm Max. working thickness 4-230mm Feeding speed 8 m/min. 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Working thickness adjustment manual . Dust extraction hose diameter 120mm. Hedpoq Dzmtjfx Anyjt European product, made in EU, with CE certificate and instruction manuals. New machine with 12 months warranty. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). Hsdpfx Ajvt Nvponyst *