Used Moulder Weinig for sale (538)

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm draw-in arbor diameter 40 mm clamping height 310 mm Hfodpfsv Uchbjx Aftjl circle diameter 80-300 mm weight 30 kg

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) Hedpowclkyofx Aftefl - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Left 11kw Hodpsvyr Hkjfx Aftjfl Top 11kw Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Hedpfextxi Iex Aftofl Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure Hsdpfx Afoxz Hh Ujtjfl 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: good (used), WEINIG UNIMAT 23EL 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 11 KW 8: BOTTOM 11 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE Hfjdpfxeyahubj Aftel 8000 RPM SPINDLES. FEED MOTOR 7.5 KW MAX FEED SPEED 44M/MIN 13 x DRIVEN TOP FEED ROLLERS 6 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5000 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER EXTRACTION MANIFOLD INCLUDED FULL DOCUMENTATION INCLUDED

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Touch control for forward and reverse movement Hsdoyt R S Nspfx Aftefl 4-roller accelerator. With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) Hfodezh Hw Ajpfx Aftol consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. Hsdjyxxgmspfx Aftofl INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 90240, Weinig four-sided planer, model Profimat 23E, manufactured in 2000. Type: P-23 E Year of manufacture: 2000 Hfjdpfezav Icjx Aftol Machine no.: 90240 Voltage: 380 V Frequency: 50 Hz The machine has been used very rarely and has mostly been kept as a backup for material calibration.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum Hfodpfx Aozawizeftel IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Hfodpfxezdpc Tj Aftjl Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING Hsdpfx Afjzmxmmstefl SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: used, Optimization line Manufacturer: Weinig Model: OptiCut 350–4 R Year: 2001 Country of manufacture: Germany Hedpfx Afoy Dri Ejtsfl ⁠Complete with loading and unloading tables

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Hedpfxjy Aux Ho Aftsfl Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: good (used), Year of construction: 2019, Weinig Conturex C124-L CNC Window production machine (in left side infeed composition) Also available C124 R (Right-side infeed) year 2010 Description; Year of construction: 2019 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 175 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request Available approx. end of 2026 / January 2027 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Hfedpsyvh Eyjfx Aftel Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Weinig combiner machine, model PFA17N, grooved bench, 8 shafts (lower 4kW, right 4kW, left 5.5kW, right 4kW, upper 5kW, lower 4kW, universal 4kW, universal 4kW), used. Hsdpfoy S Acxjx Aftefl

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Hedsyl Rmqepfx Aftjfl Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  11kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. Hedpeyl Rm Rsfx Aftofl OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Hedpozc I Dbofx Aftsfl Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right Hsdpfx Afolx Em Uotofl 3. left 4th top 5. universal feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw Hodpfxoncc Ics Aftefl control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: good (used), Year of construction: 2008, I sell the fourside moulder Weinig Unimat 300, year 2008 Feeding speed 5-30 m/min. Hodpfx Asr Arr Ejftsfl Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Fully working! Available immediately

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads Hsdpsrigxyefx Aftjfl electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, - Working width (mm): 140 - Shafts: 7 Hfjdpfxjrg Exrj Aftjl 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave