Used Lumber Planer for sale (1,579)

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Crjdpfxjl Dw Nxj Aa Neb

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Cjdpsi Apuhsfx Aa Norb Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Crsdpfeu Au I Tex Aa Njb Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Crsdpfeyf A H Nsx Aa Neb Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: good (used), For sale is a used Holzprofi KDR 310 ST planer-thicknesser with a planing/thicknessing width of 310 mm. The machine is in good condition and has been serviced and inspected by our technical staff (fully functional). Technical specifications: - Planing/thicknessing width: 310 mm - 4-knife cutterblock (strip knives) - Planing table length: 1270 mm - Thicknessing height: 180 mm - Feed speed: approx. 6 m/min - Extraction connection - 3 HP motor 2 The planer-thicknesser is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Cedoy Nm Akepfx Aa Nerb Related terms: planer, thicknesser, thickness, Felder Reference: R-N316X

Condition: good (used), For sale is a used Felder AD7-41 planer-thicknesser with a maximum planing height of up to 220 mm. The machine is in good condition and has been serviced and inspected by our qualified personnel. Technical specifications: Crodpjy Nnf Hefx Aa Njb - Felder system cutter block - Planing width: 410 mm - Max. clearance: 220 mm - Motor power: 4 kW / 5.4 HP - Incl. boring support - Incl. transport trolley for support - Year of manufacture: 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surfacer, thicknesser, planer, jointer, thickness Reference: R-R027F

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Maximum machinable width: 230 mm Crjdpfxsy Nkpbe Aa Neb Max. forward feed speed: 12 m/min Operator shafts number: 4

Condition: excellent (used), Catalogue number 7981 TECHNICAL DATA - shaft width: 410mm - 3-knife shaft - shaft guard - table length: 2530mm - cast iron tables - both tables adjustable - original angle-adjustable fence - motor: 3.3 kW - brake - dimensions (L/W/H): 2550x850x970mm - weight: 604kg ADVANTAGES – Polish production, ŻEFAM brand – 3-knife shaft – brake – used jointer, in very good condition Net price: 5900 PLN Cedpfxoy Id Twe Aa Nsrb Net price: 1400 EUR depending on 4.2 EUR exchange rate (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 1996, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, table length: 1,970 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, - German-made - grooved table - year of manufacture: 1996 - feed rollers integrated in the table TECHNICAL SPECIFICATIONS: - planing width: 230 mm - planing height: 160 mm Crjdpfey Hq Hnsx Aa Neb - grooved table - spindle diameter: 40 mm 1st lower spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th lower spindle: 7.5 kW - feed speed continuously variable: 6-36 m/min - feed motor power: 5.5 kW - six upper steel feed rollers - two upper rubber feed rollers - three feed rollers integrated into the table - pneumatic feed pressure - pneumatic shoe pressure - spindles with brakes - infeed table length: 1970 mm - electric height adjustment - central lubrication (split) - extraction port diameter: 140 mm Machine dimensions: - (length / width / height): 410x200x180 cm - weight approx. 3000 kg

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Credpfxjxzbn Ns Aa Neb Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: excellent (used), Weinig 140/4A Four-Side Planer Cjdpfx Aasw Tiyxe Nsrb Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Condition: excellent (used), Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Crjdpfx Asw E Hcvea Njb Number of spindles: 4 Spindle arrangement: Bottom 4 kW Right Left 5.5 kW Top 4 kW Feed speed adjustable with variator: 4–20 m/min Total power: 16 kW

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Cedpotxxwdjfx Aa Nerb Right Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Thick soundproof cabin Machine dimensions 380x226x178cmH CE certificate

Condition: used, Year of construction: 2014, Working width 300 mm Working height 200 mm Number of knives 3 St. machine weight ab. 246 kg Cedpey Nd Uwsfx Aa Nerb knife system Tersa Combined planing and thicknessing machine Holzkraft / SCM Minimax type FS 30 Classic for precise planing and thicknessing of solid wood and wood-based materials. The machine combines two processing steps in one compact device and enables precise surfaces and uniform material thicknesses. Ideal for joineries and ambitious woodworkers.

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production Cjdoibq Nijpfx Aa Norb - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: good (used), Year of construction: 2002, Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Crjdohhyr Aopfx Aa Njb Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: used, Used machine Equipment and technical data: - Planing width: 510 mm - Planer table length: 2620 mm - Motor – cutter head: 4 HP, 400 V, 50 Hz - Star-delta starting - 2-knife cutter head - Tiltable fence for planing Machine does not have a motor brake and can therefore only be offered for spare parts Csdpjy Ih Sqofx Aa Norb Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2021, total width: 2,200 mm, total height: 1,900 mm, Empty weight: 12.000 kg Dimensions (LxBxH): 710 x 220 x 190 cm - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 2010016 - Number of spindles [pcs.]: 9 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - └ Spindle 8: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 9: - - Spindle type: Universal - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 10 - Max. planing height [mm]: 200 - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - Transport dimensions: 7100mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Crjdjxiw Hqjpfx Aa Njb VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, total width: 1,200 mm, total height: 1,300 mm, Colour: Green Weight: 750 kg Dimensions (LxBxH): 265 x 120 x 130 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 500 Crodpfx Aaey Ncfzj Nob - Max. planing depth [mm]: 20 - Infeed table length [mm]: 1430 - Outfeed table length [mm]: 1130 - Total table length [mm]: 2630 - Cutter block diameter [mm]: 1200 - Number of knives [pcs]: 4 - Diameter extraction nozzle [mm]: 150 - Height adjustment: Manual - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 2650mm x 1200mm x 1300mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1968, Used machine Year of manufacture: 1968 Features and technical data: Planing width: 630 mm Planing height: 220 mm Speed of 4-knife cutterhead: 5,500 rpm Motor power: 6 HP Feed rate: 7/14 and 9/18 m/min Weight: 1,150 kg Due to the missing motor brake, the machine can only be sold as a parts donor! Codpjy Ih Swsfx Aa Nerb Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Codoyhgiaepfx Aa Nsrb Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, Year of construction: 1992, Working width: 530 mm Planer shaft: Leitz - Centrofix Number of knives: 4 Surface table length: 2900 mm Csdpjug Tytsfx Aa Njrb Surface table adjustment: lever Chip removal display: scale Adjustable fence angle: yes Motor power: 4 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 800 kg

Condition: used, Year of construction: 1985, Working width: 500 mm Cutterhead: Strip knives Crsdsm H Uxrspfx Aa Nsb Number of knives: 4 Surface table length: 2700 mm Surface table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 4 kW Motor brake: Yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: new, Year of construction: 2022, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Surface table length: 3000 mm Surface table adjustment: motorized Chip removal display: digital Adjustable fence angle: yes Motor power: 7 kW Crodpsiqg Nwofx Aa Nob Extraction port: 120 mm Machine length: 3005 mm Machine width: 1460 mm Weight: 870 kg

Condition: used, Year of construction: 1981, Working width: 510 mm Planer shaft: strip knives Number of knives: 2 Surface table length: 2600 mm Surface table adjustment: hydraulic / foot pedal Concave-convex joint adjustment: yes Chip removal display: scale Codpfx Aaey Hqdgj Nerb Concave-convex joint display: scale Surface fence angle adjustable: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2600 mm Machine width: 1000 mm Weight: 1050 kg