Used Moulder for sale (682)

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Bjdexak N Hepfx Abzeww Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), Mainly used in high-speed production lines (up to 180m/min) Maximum length 6.1m. Workpieces are dropped on anti-clockwise rotating rollers, thus creating a precise reference line. Transport conveyor belt between moulder and transfer Bwsdoxbpqrjpfx Abzow system for separation of workpieces. - precise positioning of pieces in the following cross feeding system - low noise emission due to carful returning to reference line - automatic transfer to cross feeder, stacker or further processing unit. Possible to offer 2 arm right angle transfer units also if needed.

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) Bedpfxsxlm Nyj Abzsww - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LMC-623C, working width: 230 mm, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 150 mm, total width: 1,600 mm, total height: 1,800 mm, total length: 3,500 mm, overall weight: 4,500 kg, power of feed motor: 7,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 125 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, workpiece height (max.): 150 mm, compressed air connection: 6 bar, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 415 V, tool diameter: 200 mm, table length: 2,000 mm, warranty duration: 12 months, shaft diameter: 40 mm, number of spindles: 6, extraction connection diameter: 125 mm, power: 74.5 kW (101.29 HP), input frequency: 50 Hz, product height (min.): 10 mm, product width (min.): 15 mm, Equipment: motor brake, The Leadermac LMC-623C Compact is a heavy-duty 6 spindle planer moulder (4-sided moulder) built for precision and high-volume production. It offers a working range from 15 mm to 230 mm in width and 10 mm to 150 mm in height, making it versatile for a wide variety of timber sizes. This machine is equipped with powerful Siemens IE3 motors, centralised lubrication, and pneumatic side pressures to ensure smooth operation, fast setup, and long service life. The 2000 mm infeed table with fence provides stable feeding, while hardened chrome bed plates and safety interlocks guarantee durability and operator protection. Highlights: Bodpoxlfd Nsfx Abzoww 6 precision spindles, 40 mm, 6000 rpm Motor powers up to 20 hp per head (total installed 74.5 kW) Variable feed speeds 6–24 m/min (option to 30 m/min) Pneumatic chip breakers & pressure pads with digital readouts CE certified, dust extraction Ø125 mm A compact footprint with industrial-level performance — ideal for joinery workshops, moulding production, and manufacturers needing a reliable 4-sider.

Condition: used, functionality: fully functional, spindle diameter: 30 mm, – Italian manufacture – CE marking – long worktables TECHNICAL PARAMETERS: Bwjdew Ip R Hjpfx Abzjw – spindle diameter: 30 mm – spindle height: 150 mm – maximum tool diameter: 350 mm – five spindle speeds: 3000 / 4500 / 6000 / 7000 / 10,000 rpm – height adjustment – electric brake – motor power: 5.5 kW – table size: 730 x 1200 mm – two auxiliary tables: 410 x 670 mm – table height from base: 925 mm – extraction port diameter: 2 x 120 mm – machine dimensions (L/W/H): 261 / 100 / 120 cm – weight: 800 kg

Condition: used, Year of construction: 1977, Gubisch planer Type: 172/2 Year of manufacture: 1977 Planing width: 170 mm Planing height: 120 mm Spindle diameter: 40 mm Bwodpfx Ajxfzlpjbzjw Spindle positions: Bottom 4 kW Right 4 kW Left 5.5 kW Right 5.5 kW Top 7.5 kW Top/Bottom 7.5 kW

Condition: used, Year of construction: 1998, Bottom right left top bottom universal Bodoxdw Udopfx Abzoww working width 220 mm working height 120 mm

Condition: excellent (used), Standard version Weinig 811 board stacker Length min.-max. 1800 - 6100 mm Width max. 250 mm Height max. 160 mm Outfeed of automatic stacker Stack cross section max. 1200 x 1200 mm Stack weight 5000 daN (5 to) Max. capacity 5 layers per minute 4 elevator arms, 4 carrying arms and 4 lifting arms Bjdpoxbpi Uefx Abzeww lnfeed height of automatic stacker in connection with elevator approx. 850 mm Beginning of stack above ground 600 mm Drive motor 7.5 kW (10 HP) Possible to offer 811 floor level stackers also for 6m boards with board stacked on scissors lift with roller conveyors

Condition: good (used), Year of construction: 1991, I sell the heavy duty fourside moulder Weinig Unimat 17 Feeding speed 6,5 - 49 m/min. Working width 170mm Working height 130mm 7 spindles (6+Universal) Bedpfef Rtgkox Abzeww Configuration: bottom - right - left - right - top - bottom (motor missing) - universal Total power apprx. 33kW Incl. Moulding heads and accessories on photos. Machine suitable mostly for wooden facing, parquettes and floors production. Fully working! Sellable immediately Deffects: broken entry table (can be underlaid like on the photo) 1 pc. Motor for spindle nr. 6 missing

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES - Year 1997 Bsdpowrh Iyjfx Abzsww

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. Bsdpfx Absm Tg Ecjzoww milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: new, Year of construction: 2024, functionality: fully functional, New machine Stainless steel model 24 months warranty Advantages: + TOP price-performance ratio + complete machine in stainless steel cladding + robust baguette long roller + with secured, high feed hopper + with safety switch on the feed hopper, stops the machine immediately (see video!) + Felt conveyor belts + simple, mechanical adjustment of the long roller properties + fast supply of spare parts within 1-2 working days SPECIAL accessories, optionally available at an extra charge: - Chassis: + 440,-- EUR net --- with 4 swivel castors, 2 with brakes - Guide for box loaves: + 490,-- EUR net Technical data: - Long roll width: max. 750 mm - Weight range: 50 - 1,200 gr - Hourly output: approx. 1,200 pieces (depending on dough) - Motor power: 0.37 kW - Connected loads: 400 V - 3Ph - 50Hz - 16A CEE plug Bjdshydbtepfx Abzoww - Dimensions: 97 x 68 x 155 cm (WxDxH) - Height of the machine: approx. 70 cm (without frame) - Net weight: 250 kg

Condition: used, Year of construction: 2004, working width min/max 80/260 mm Bwedpfx Aboxdwr Nszew working height min/max 12/210 mm feedspeed min /max 5-30 m/min

Condition: excellent (used), Year of construction: 2008, Weinig Unimat 500 Year of manufacture: 2008 Planing width: 260 mm Planing height: 120 mm Bedoxdm Tvjpfx Abzeww Infeed table length: 2,500 mm Feed speed: 5 - 30 m/min Feed motor: 4 kW Automatic positioning of the left and top spindle Spindle positions: Bottom 7.5 kW Right ) Left ) 11 kW Top 11 kW Bottom 7.5 kW

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Bedpfx Absu N Iwnezeww Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 0,75 kW

Condition: used, Year of construction: 1997, machine/vehicle number: AB/109677, SECOND-HAND SPINDLE MOULDER SCM MOD. T130N - CE RULES - S/N AB/109677 Bwsdewrh Nkjpfx Abzew - Year 1997 Technical specifications Spindle diameter 50 mm Spindle height 180 mm Height adjustment; useful stroke 140mm Rotation spindle speed: 3.000 / 4.500 / 6.000 / 7.000 / 10.000 Maximum tool diameter 250 mm Table top dimensions 1200 x 730 mm Height from base 925 mm Voltage 400V, 3 phases, 50 Hz, 12 A Motor power 5.5 kW Dimension 1200 x 1000 x 1400 mm Weight 600 Kg

Condition: new, Year of construction: 2024, functionality: fully functional, New machine 24 months warranty Advantages: + TOP price-performance ratio + robust baguette long roller + 3 rolling cylinders made of polypropylene with chain drive + with secured infeed hopper, infeed chute is blinded + additional protection to prevent interference with the rollers + with safety switch on the feed hopper, stops the machine immediately (see video!) + Felt conveyor belts + simple, mechanical adjustment of the long roll properties + fast supply of spare parts within 1-2 working days SPECIAL accessories, optionally available at an extra charge: - mobile frame: + 390,-- EUR net --- painted frame, with 2 storage compartments under the machine --- with 4 swivel castors, 2 with brakes Bwodpfxohyda Ie Abzjw - Guide for loaves: + 490,-- EUR net Technical data: - Long roll width: max. 750 mm - Weight range: 50 - 1,200 gr - Hourly output: approx. 1,200 pieces (depending on dough) - Motor power: 0.55 kW - Connected loads: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 115 x 69 x 167 cm (WxDxH) - Throw-in height: 144 cm - Height of the machine: approx. 75 cm (without frame) - Net weight: 258 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 Bedpewrh Hvefx Abzeww - Year 1998

Condition: new, Year of construction: 2024, functionality: fully functional, New machine Stainless steel model 24 months warranty Advantages: + robust, compact machine Bjdpjivd Dvjfx Abzoww + easy maintenance and cleaning + suitable for long kneading of smaller dough pieces + optimal for wrapping sandwich buns + secured dough infeed + conveyor belts made of felt + output plate is height adjustable + very practical in combination with a bun press + fast spare parts supply within 1-2 working days Technical data: - Long roll width: max. 180 mm - weight range: 20 - 80 gr (depending on dough) - hourly output: approx. 2.000 pcs (depending on dough) - motor power: 0,37 kW - connected load: 230 V - 1Ph - 50Hz - dimensions: 280 x 475 x 280 cm (WxDxH) - Height input tube: 45 mm - Net weight: 26 kg

Condition: used, SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Bodpfemxliajx Abzjww - S/N 25 906/001

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom - 2nd vertical right - 3rd vertical left - 4th horizontal top - 5th horizontal bottom - 6th universal Bedowrx Nbepfx Abzsww - Working width mm. 230 - Cardan feed - Year 2002

Condition: used, Year of construction: 1998, SECOND-HAND 5 SPINDLES MOULDER WEINIG PROFIMAT 23 E - CE RULES - ATS system - Working width 260 mm - Working height 160 mm. Composition : - Horizontal bottom 5.5Kw - Vertical right (7.5Kw Rh + Lh) - Vertical left - Horizontal top 7.5Kw - Horizontal bottom 11Kw - Year 1998 (CE) - V 380/50 Bwedpfx Abomxkx Hszow

Condition: used, Year of construction: 1989, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. P22N - Cardan feed - Composition: Bwsdewrr T Hepfx Abzjw * Horizontal bottom * Vertical right * Vertical left * Horizontal top * Horizontal bottom - Year 1989

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 Bwedpfx Ajrm Rxwebzjw - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 V 380/50

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw - Vertical right/left 7.5Kw Bjdpfswrxuwjx Abzoww - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)