Used Moulding Machine for sale (83,223)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Gisdoxw U Syjpfx Ah Hel Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Godpfx Ajxcakreh Hsil Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Giodofphtvjpfx Ah Hel Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Injection moulding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Water system: Oil cooler: Cooling water connection [...]

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Gijdpfxsx D Rg Ts Ah Hjl Max open daylight 1130 mm Mould height min 250 mm Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Blade thickness 1 to 4mm Width band saw blades 60 to 420 mm Godpfxsgxb Ebs Ah Hoil circular saw blades 300 to 1.200 mm Ø electric feed drive via gear motor

Condition: excellent (used), Year of construction: 2012, operating hours: 49,130 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 42 mm, displacement volume: 214 cm³, injection pressure: 1,724 bar, ejector force: 20,400 N, ejector stroke: 130 mm, plate length: 610 mm, plate width: 635 mm, total length: 4,370 mm, total width: 1,210 mm, total height: 2,200 mm, overall weight: 3,730 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 725 mm, Equipment: documentation/manual, warehouse no.: 503452 manufacturer: BOY Gisdpfoxv R S Tsx Ah Hel type: 90 E controller: Procan ALPHA year of construction: 2012 operation hours: 49130 h clamping force: 900 kN distance between tie-bars h x v: 430 x 360 mm size of mould plates h x v: 635 x 610 mm min. mould height: 250 mm max. open daylight: 725 mm opening stroke: 475 mm screw diameter: 42 mm swept volume: 214.7 ccm injection pressure: 1724 bar screw length: 20 l/d screw stroke: 155 mm screw speed: 280 min screw torque: 700 N plasticising rate: 136 g/s PS number of heating zones: 4 nozzle stroke: 250 mm equipment included screen text german core pulling hydraulically 1x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 4.37m x 1.21m x 2.2m total weight: 3730KG

Condition: reconditioned (used), operating hours: 40,662 h, functionality: fully functional, clamping force: 306 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, ejector stroke: 80 mm, total length: 2,520 mm, total width: 860 mm, total height: 1,900 mm, overall weight: 1,150 kg, Now fully refurbished at our headquarters in Northamptonshire, is this BOY 30M injection moulding machine. The 30 machine is a rare find on the used market as it offers a versatile four tie bar setup with good platen areas, from a footprint not much larger than that of a BOY 22. If you’re looking for the most versatile little machine, this has to be worthy of consideration. Fitted with the Procan MD controller and 28mm diameter screw, which gives a shot weight of 49 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Giodev S D Svspfx Ah Hsl

Condition: excellent (used), The machine was built in 2007 and has only worked 5,000 hours. It was used exclusively to test casting molds, which explains the low operating hours. The machine can be inspected and tested under power in Germany – 64850 Schaafheim. For further information, please contact us. In addition to the machine, plastic granulates as well as various accessories and spare parts (see photos) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located fully assembled in 64850 Schaafheim (Germany). Condition: The machine can be connected to power and demonstrated. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and tool specifications: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold height: 250 mm Maximum mold height: 700 mm Daylight: 950 mm Center bore: Ø 125 mm Main technical data Feature Description Manufacturer ENGEL AUSTRIA GmbH Machine type Victory 1050/220 Power Year of manufacture 2007 Machine no. 167023 Control system ENGEL CC control (touch panel, graphical user interface) Clamping force 2,200 kN (220 t) Screw diameter Suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure Up to 3,000 bar at 400 °C Injection volume (PS) Up to 1,600 cm³/s Gijdpfx Asxldtijh Hol The machine can be inspected and tested at any time at our facility in Schaafheim by prior arrangement. Best regards

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 Gsdpfexukgujx Ah Hjil 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Godpfx Ahjukn S Hs Hsil Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Shot weight: 2,560 g/PS Gsdpjxauycjfx Ah Hoil Control: NC 4 Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 - 4 core pulls

Condition: good (used), Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph Gsdpfx Aomqm E Ujh Hoil

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Gisdpfxswfp Hkj Ah Hel Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Weinig Hydromat 17 BL planer with destacker Gsdpfxsv Euy Rs Ah Hsil Feed: 60 m/min Heads: 1. lower - 11 kW 2. right side - 7.5 kW 3. left side - 7.5 kW 4. upper - 11 kW 5. lower - 7.5 kW 6. upper - 7.5 kW 6 feed rollers in the table Feed motor - 15 kW Planing width - 170 mm Planing height - 120 mm Machine on elevated platform Loading included in the price. Perfect condition!

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Gsdpfx Ahoxz Tq No Hoil Total machine weight 11500 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, overall weight: 2,400 kg, type of input current: three-phase, total height: 1,790 mm, pressure: 6 bar, pressing force: 70 t, This Comec SPM/15 moulding machine is in excellent, like-new condition, with very low operating hours. It’s been used for precision moulding of soles for Footwear. Godpfoxu Dyzsx Ah Heil Operation: Pneumatic, Oleodynamic Ideal for: Footwear soles, technical moulded parts, or similar applications Machine has been regularly maintained, kept in a clean production environment, and shows no signs of wear or damage. Perfect choice for manufacturers looking for top performance at a lower investment cost compared to a new unit.

Condition: ready for operation (used), A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible. Gisdpfjxxa S Isx Ah Hsl

Condition: good (used), Loypack One shot chocolate depositor Gsdemqm E Repfx Ah Heil Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: used, Year of construction: 2017, operating hours: 17,481 h, functionality: fully functional, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 393 cm³, injection pressure: 1,892 bar, injection weight: 375 g, mold height (min.): 300 mm, ejector force: 33 N, ejector stroke: 150 mm, total length: 5,000 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 8,200 kg, heating capacity: 15.5 kW (21.07 HP), pump power: 2,200 W, type of input current: three-phase, Equipment: documentation/manual, The machine has been regularly maintained, test possible. Gjdpfjxvqnnsx Ah Hsil

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 61029386, clamping force: 2,000 kN, screw diameter: 70 mm, Equipment: documentation/manual, KraussMaffei 200/1400 CX POL BMC injection molding machine for sale in very good condition. Few operating hours, manufactured in 2017, commissioned in 2018. MC6 control. For details, please contact us by email! Thank you! Godpjwz Iv Aefx Ah Hoil

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 523 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Size of mould platens (h x v) 985 x 915 mm Distance between tie bars (h x v) 630 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 55 mm Ls/D ratio 20 Injection pressure 1904 bar Stroke volume 523 ccm Shot weight (PS) 476 gr. Giedpfx Aexz Tqvsh Hel Injection rate 216 ccm/s Screw speed 280 1/min Plasticising rate max. 49,7 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 37 kW Installed heating capacity 18 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,60 x 2,20 x 2,20 m Total machine weight 11000 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 150 X: 900 mm Y: 700/700 mm Z: 2000 mm C: 0 - 90 Grad Additional Options: - Bluepower - Servodrive - 2 x air valves - 3 x core pulls - 2 x 6-fold water battery

Condition: new, Moulding machine Ital Form Made of duralumin and steel Giedpeuuh Txjfx Ah Hol 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Giodpew Az Riefx Ah Hsl

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Gsdpotyaypofx Ah Hjil

Year of construction: 1999, condition: ready for operation (used), An old Arburg injection molding machine and five HB-Therm temperature control units are available. 1) Injection molding machine Arburg Allrounder 270S 250-70, clamping force: 250kN, tie bar distance: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, mold height range: 200mm/550mm. 2) Temperature control unit HB-Therm HB-W 140, year of manufacture: 1999, max. temperature: 140°C, flow rate: 40l/min, max. operating pressure: 12bar, machine dimensions X/Y/Z: approx. 650mm/300mm/1000mm, weight: approx. 75kg. An on-site inspection is possible. Gsdpfxsxvdfaj Ah Heil