Used Moulding Machine for sale (91,585)

Condition: used, Year of construction: 2006, A Demag Ergotech injection molding machine including Wittmann robot and machine housing is available. 1) Injection molding machine Demag Ergotech 50/355-200, year of construction: 2006, tie bar distance X/Y: 355mm/355mm, min. installation height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, injection weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Cage. Documentation available. On-site inspection is possible. Godpfx Aaswvadnsbobu

Condition: used, Year of construction: 2008, operating hours: 69,348 h, functionality: fully functional, The machine comes with a complete injection unit featuring both 35 mm and 40 mm screws. It is equipped with hydraulic core pull and integrated 8-channel heating control. The control unit is NC 5 with touchscreen, delivered with full documentation. The machine includes a Euromap 67 robot interface. The machine is in impeccable technical condition and can be tested in operation by prior arrangement. The machine can be inspected in operation at any time – prior appointment is required. Year of manufacture: 2008 Operating hours: 69,348 Machine sale price: HUF 6,600,000 + VAT (EUR 16,500 + VAT) Gedpsw Icx Djfx Aabebu

Condition: ready for operation (used), Year of construction: 2008, operating hours: 65,345 h, General Data Machine weight 22200 kg Godpewzn Acjfx Aabobu Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Gbsdoilhfcopfx Aabeu

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Godpfor N Rh Hsx Aabjbu

Year of construction: 2012, condition: ready for operation (used), Clamping force: 62.5kN, opening stroke: 110mm, ejector force: 6.4kN, ejector stroke: 60mm, platen distance: 119mm-229mm, mold carrier (fixed): 247mm/172mm, mold carrier (movable): 128mm/155mm, screw diameter: 12mm, injection volume: 6.8cm³, injection pressure: 1360bar. Machine dimensions X/Y/Z: approx. 700mm/1200mm/1650mm, weight: approx. 350kg. Documentation available. On-site inspection is possible. Gbjdjwyxa Njpfx Aabou

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, paint mixing units and T-conveyor belt. Documentation available. On-site inspection is possible. Gbjdpfx Asw Az Risabeu

Year of construction: 1997, condition: ready for operation (used), Clamping force: 250kN, approach force: 20kN, opening force: 65kN, max. opening stroke: 275mm, mold installation height: 200mm, platen distance: 475mm, column distance: 220mm, platen dimensions X/Y: 400mm/400mm, screw diameter: 22mm, stroke volume: 30cm³, molded part weight: 25g/hp, weight: approx. 1900kg, operating hours: approx. 42046h. Documentation available. On-site inspection is possible. Gsdpfx Ajwxxvzjabobu

Year of construction: 2019, condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Gsdpfxjrk Rxqo Aabobu

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Gbjdsugmx Aopfx Aabou

Year of construction: 2009, condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Godpfx Aaou Afz Debobu

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Gbjdpfxst E Trhs Aabou

Year of construction: 2008, condition: ready for operation (used), Ten injection molding machines are available. 1) Netstal SynErgy 1500/460, year of construction: 1998, clamping force: 140t, tie bar spacing: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 9200kg, operating hours: 129131h. 2) Netstal SynErgy 1500/460, year of construction: 2007, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11500kg, operating hours: 85445h. 3) Netstal SynErgy 1500/460, year of construction: 2006, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mold height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11000kg, operating hours: 91159h. 4) Netstal SynErgy 900/230, year of construction: 2007, clamping force: 100t, tie bar distance: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mold installation height: 200mm, weight: 6800kg, operating hours: 73323h. 5) Netstal SynErgy 900/230, year of manufacture: 2007, clamping force: 100t, tie-bar spacing: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mold installation height: 200mm, weight: 6800kg, operating hours: 87883h.6) Netstal SynErgy 1500/230, year of construction: 2000, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/870mm, max. opening stroke: 450mm, screw diameter: 40mm, injection volume: 161cm³, min. mold installation height: 250mm, max. injection pressure: 1447MPa, weight: 11000kg, operating hours: 93464h.7-8) Netstal ELION Force 800-270, year of construction: 2008, clamping force: 80t, tie bar distance: 410mm, platen dimensions X/Y: 600mm/632mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, mold installation height min./max.: 250mm/500mm, max. injection pressure: 1690MPa, weight: 7800kg, operating hours: 82400h.9) Netstal SynErgy 800/230, year of construction: 2005, clamping force: 100t, tie bar distance: 510mm, platen dimensions X/Y: 617mm/600mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, min. mold installation height: 200mm, weight: 6800kg, operating hours: 97530h.10) Arburg Allrounder 370C, year of construction: 1997, clamping force: 370t, platen dimensions X/Y: 570mm/570mm, max. opening stroke: 500mm, screw diameter: 30mm, injection volume: 70cm³, min. mold installation height: 250mm, max. injection pressure: 1500MPa, weight: approx. umentation available. On-site inspection is possible. Godpfxev Amrme Aabebu

Year of construction: 2013, condition: ready for operation (used), A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible. Gbsdpsv Ext Ijfx Aabou

Year of construction: 2001, condition: ready for operation (used), Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible. Godpfxowydg Ue Aabsbu

Year of construction: 2008, condition: ready for operation (used), Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible. Gbjdpfxjwz N Tvj Aabeu

Year of construction: 2007, condition: ready for operation (used), Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible. Gbodpfx Ajv R Ew Deabeu

Year of construction: 1996, condition: ready for operation (used), Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible. Gjdpfx Aajv T Ap Nsbebu

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Gbedpevb Hbfefx Aabju

Year of construction: 1998, operating hours: 62,144 h, condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Gbsdpov Ifwxjfx Aabeu

Year of construction: 2005, condition: ready for operation (used), Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible. Gedpfov Ip Rvjx Aabsbu

Year of construction: 2010, condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Gbodpfx Aeu St I Rsabsu

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Gbedeum U S Ejpfx Aabju

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Gbodpfx Aaerc Hibjbou

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Gsdpow Rqwtefx Aabebu