Used Multi Rip Saw for sale (28,249)

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Lhjdpeua E Trofx Aabjn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Lodpovz Hxqefx Aabshn Weight 3500 kg Total power requirement 94,75 kw

Condition: as good as new (ex-display), Year of construction: 2024, Automatische langssnijzaag Raimann FlexiRip “Jrionline” Ljdju Sg Anjpfx Aabshn Zaag lengte : 6200 mm Maximale zaaghoogte afhankelijk van de diameter van het zaagblad, variërend van 85 tot 210 mm. Alleen gebruikt als demo, praktisch als nieuw, met slechts 34 draaiuren.

Condition: excellent (used), For sale Hegner Multicut 2S ready for use Lsdpfx Aaoq R Ufxobshn

Condition: good (used), Year of construction: 2004, functionality: fully functional, belt width: 450 mm 4 movable blades + 1 fixed blade Ledpowy Hzhefx Aabohn lasers optimization software

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Lhsdpfxsvz Hxkj Aabjn Weight 3300 kg Total power requirement 71,5 kw

Condition: used, Year of construction: 2012, total width: 1,750 mm, total length: 1,800 mm, total height: 1,600 mm, Weight: 1.900 kg Price: On request - Arbor hole saw blade diameter [mm]: 650 - Conveyor motor power [kW]: 0.8 - Conveyor width [mm]: 350 - Year: 2012 - Documentation available: Yes - CE marking present: Yes - Serial number: 12236 - Voltage [V]: 400 - Current consumption [A]: 80 Lhedpfx Aewniideabon - Fuse [A]: 100 - Power [kW]: 57.0 - Transport dimensions: 1800mm x 1750mm x 1600mm (l x w x h) - Transport weight [kg]: 1900kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1995, working width: 1,300 mm, saw blade bore: 80 mm, Multi-blade saw Manufacturer: Zaffaroni Model: MLS 130 P including infeed and outfeed systems Hydraulic lift table for infeed and outfeed, for max. workpiece length approx. 3300 mm CE marking Working width: 1300 mm Pass-through width: 1520 mm Min. workpiece length: approx. 450 mm Workpiece thickness: approx. 2 - 45 mm Saw shaft: approx. 80 x 1310 mm Max. saw blade diameter: approx. 280 mm Saw motor power: approx. 22 kW Variable feed, approx. 1.5 kW Dimensions: approx. 2100 x 1700 x 1500 mm Lhedoxp Rl Hepfx Aabon Specifications are partially estimated or taken from the manufacturer's brochure.

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) Ljdpfx Aeuryrneabshn - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Lhsdpfx Asdzp Snjaben Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device 2x floating saws maximum saw blade distance 550 mm maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics strong solid body robust line not afraid of challenges Lhsdjqwgy Nopfx Aabon

Condition: used, functionality: fully functional, overall weight: 20,000 kg, total height: 5,000 mm, total width: 3,500 mm, total length: 13,000 mm, feed length X-axis: 400 mm, feed length Z-axis: 1,900 mm, Equipment: rotational speed infinitely variable, Carl Meyer gang saw for marble or sandstone with block trolley, ideal for smaller blocks. Minimal energy consumption: 18.5kW. Max block dimensions: 2800–3000/1900/1900mm. Machine dimensions: L: 13.5m, W: 3.5m, H: 5.0m. Frame size (inside): 3600/1600mm. Price includes some new spare parts, dismantling, and loading onto truck. Lodpfx Aajv D I Ifsbohn

Condition: excellent (used), Year of construction: 2009, Edger, multi-blade, and trimmer circular saw MEBOR with control Robust and reliable machine Can be used as an edger with movable saw blade or as a trimmer with batten head. Main motor power 37.0 kW, 400 V, 50 Hz Saw blade speed 2800 rpm Saw blade diameter 250 - 400 mm Max. cutting height 120 mm Max. passage width 900 mm Minimum workpiece length approx. 1200 mm Feed motor power approx. 2.2 kW, 400 V, 50 Hz Feed speed approx. 0 - 40 m/min Number of feed rollers: 3 below, 2 above Extraction port approx. 200 mm Extraction volume approx. 4000 m3/h Blade control - automatic Blade positioning - hydraulic Feed via FU - continuously adjustable 2 x LASER - cutting line indicator Lhedpfx Aajwm Hx Hsbjn CE NEW SAW SHAFT BEARING INCLUDES - some saw blades - infeed roller conveyor, non-driven, 3000 mm Dimensions L x W x H = 2350 x 1550 x 1500 mm Weight approx. 3700 kg Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex-location - free loading! • The machines have been cleaned and function-tested. • All machines are bought as seen, with no guarantee of any kind. The buyer is free to inspect the machines at the location. • Special agreements are only valid in writing. (We only respond to inquiries including your address + telephone number!)

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm Ledpfxst Dxwao Aabehn nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Lodpjri Si Djfx Aabjhn Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Year of construction: 2022, condition: reconditioned (used), MULTIPLE CROSS CUTTING SAW Machine ideals for the production of precise elements for pallets min\max lenght of the planks 800\5000 mm max depth of cut 150 mm Lhodpfx Aasfky Enebjn power motor 11 kw

Year of construction: 2001, condition: used, Multiple crosscut saw with 4 saws Lhsdpfx Aaeiw El Ujbon

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Ledehrdxiepfx Aabshn

Condition: ready for operation (used), Technical characteristics For cutting all types of timber for carpentry and timber frames Cutting capacity 800 to 1000 pieces per 8-hour shift Cutting length (max): 7000 mm Cutting length (min): 460 mm (90°) Wood cross-section (max): 300 mm x 50 mm 5 Blades: 2x ∅ 800 mm (1725 rpm, 10 HP) + 3x ∅ 500 mm (3450 rpm, 5 HP) 2 suction nozzles: ∅ 200 mm Air speed: 28 to 30 m/s per nozzle Supplied with: - Automatic horizontal wood discharge table - Automatic wood stacking scissor table - Under-machine waste conveyor Power and Motors Voltage: 400 V Power: 45 Kw Overall dimensions Lenght: 11500 mm Ledjtvt Ucspfx Aabshn Width: 4000 mm Height: 2600 mm Weight: 8000 Kg

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) - 2,2 KW Feed Gearbox Ledpfx Asfdzrhjabohn - 70 mm Sawing spindle - 225 mm Circular Saws - 4000 Kg weight of the machine

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Lhodpowi I Hkjfx Aaben Weight: ± 5,500 kg 2 spare sleeves and spacers Infeed table: Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Upper rollers with pneumatic pressure

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, Lodou U Dkfepfx Aabshn OFFER OF THE MONTH UNBEATABLE PRICE

Condition: ready for operation (used), Technical characteristics Gooseneck for all widths Blade diameter : max 350 mm Cutting width: 350 mm Cutting height: 120 mm Drive by notched belt: 5 to 45 m/min Belt width 300 mm Motor 18.5 kW Feed 1.5 kW Top pressers and splinter guard Lubrication of the belt Infeed guide 4 pressure rollers Ideal for packaging, mass production, pallet manufacturing, etc. Power and Motors Pluging: Three-phased Power: 20 Kw Motor: 25 CV Lhedpetn H Eljfx Aabon Overall dimensions

Condition: ready for operation (used), Technical characteristics 4-strand chain introduction deck (optional) 3-strand decoder (optional) High performance edger SPEEDFLEX : (Ref C2985) Free roller infeed table Retractable guide aligned to the fixed blade Horizontal roller press 1 fixed blade + 3 mobile blades controlled by MUDATA 3 axis division. Lasers Sawing "downstream". Feed speed: 0-100m/mn Capacities: Max. passage height: 110 mm. Maximum sawing height: 100 mm. Max passage width: 1 000 mm. Maximum edging width: 710 mm. Max distance between 2 adjacent blades : 570 mm. Minimum distance between blades : 18 mm. Minimum length of the wood : 650 mm. Characteristics : Blade diameter : 400 mm. Rotation speed : 3750 rpm. Blade bore : 85 mm. Blade shaft diameter : 65 mm with counter-bearing Blade motor power : 55 KW (75 hp). Lhjdpfotn H Etsx Aabsn Power of feed motor : 3 KW (4 hp). Separator and operator return belt Slatted belt for slab exit (optional) Automatic transfer mechanism for 3 strands (optional) Synchronized 3 strands unloader for introduction on the chainsaw (optional) Power and Motors Pluging: Three-phased Power: 55 Kw Motor: 75 CV Overall dimensions

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC Lhodpsh Ia Upofx Aabsn MAX DEPTH OF CUT 120 MM Max. width of cut 480 mm Max. passage width 600 mm