Multi blade saw

Torwegge H33

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Nkedpfjhclffsx Ag Nsu Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Nksdpeh Ayyqofx Ag Nsu Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Nkodjw A A Ebspfx Ag Nou

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine Nodpjd Nmdksfx Ag Njku

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Nodev Raqxjpfx Ag Nsku Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Nkodpfsrxf Smex Ag Nsu

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Nkedpfxsw Sw Tkj Ag Nou Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm Nkodpfx Agjxcg Hge Neu cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Nkodpfjwkf Dvjx Ag Nju Operating Units: 7 nr

Condition: good (used), Year of construction: 2008, Professional and powerful strapping machine from a renowned European manufacturer with frame internal dimensions of approx. width 650 x height 500 mm, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system and strap coil quick change system. -Handle tension adjustable. -Soft tension possible. Nodspq Rniepfx Ag Noku -Automatic strap insertion. -Handle release on both sides via foot pedals. -Wear-free strap guides with quick-change system. -Machine movable and lockable via foot rollers. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine has been checked and overhauled by a service technician. It can be demonstrated under power.