Used Natural Stone for sale (1,668)

Condition: new, Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Laodpfx Ajuu H Aljanek Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. Laodswcl Uljpfx Aanjk • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Lasdpfov Dulqjx Aansk

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Never used, fully functional french, Alma Pro granit stone mill for sale with all the nessecarry equipment. The price includes: Lsdpfxew Tuk As Aansak - Mill, Pro 100 - Pro100 Vari (for operation) - TP-2 Pneumatic Conveyor - TVC800- 2XM vibrating Sieve - Steel work - Controll pannel

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x250x50mm Perpendicularity 1µm 4-sided! Laedpfx Aasq I R N Rjnsk Measurement report on request for an extra charge

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Lajdpfx Aeg Uar Doanok Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x2000x1950 mm Weight 1500 kg Total power requirement 5 kw Ledpfx Asv A E S Esaneak

Condition: excellent (used), Stone cutting saw with diamond blade Lsdpfx Aasw Evznonsak

Year of construction: 2023, condition: new, functionality: fully functional, Stone circular saw for masonry applications, capable of performing both straight and 45° angled cuts. The machine features a tilting worktable up to 85°, with table rotation ranging from 0° to 90°. The cutting head is tiltable from 0° to 45°, without rotation. Due to its weight (~6 tons), the machine is extremely robust and stable. Straight-toothed racks are used in the construction. The maximum saw blade diameter is 700 mm. The circular saw is equipped with the highest quality components from Siemens and Schneider. Machine control is provided via a touchscreen and control panel buttons. The main motor and axis drive motors are fitted with inverters, enabling smooth speed adjustment. A built-in laser can be used for setting the cutting line. The Z-axis is hydraulically driven. Manual limit switches are used to set terminal positions. The machine can operate in either manual or automatic mode. In manual mode, the machine is primarily operated with buttons on the control panel. In automatic mode, it is possible to save several different cutting programs for the X-axis (left-right) and Y-axis (front-back). ✔ Cutting Modes * Manual – head movement controlled via joystick on the control panel * Automatic – head movement is automatic according to preset cutting programs ✔ Machine Construction * Durable, stable foundations * Reinforced main gantry Laodpeqy Ebhefx Aansk * Tool head tiltable up to 45° * Tilting table up to 85°, rotatable 0° – 90° ✔ Movement in Specific Axes * X-axis – cutting motion left-right (tool carriage movement along the gantry) * Y-axis – gantry movement front-back (gantry movement along horizontal guides) * Z-axis – vertical movement of the head * A-axis – tilt of the head (0° – 45°)

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Ljdpfx Aet Hvlgsaneak Dimensions 1130x570x1600 mm Weight 72 kg

Condition: excellent (used), functionality: fully functional, Natural Dye Mixing Installation Laodpfx Aew Dfxgoanjk Installation for mixing natural dyes consisting of: 2 stainless steel tanks with agitator Internal dimensions of each tank: ø 590 mm x 850 mm External dimensions of the tanks: ø 600 mm x 1650 mm Manifold with 7 valves Manufacturer: GEA Tuchenhagen GmbH Dosing pump Manufacturer: Sera GmbH Flow meter Manufacturer: Endress+Hauser Type: PROMAG A Stainless steel control cabinet Manufacturer: APV

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Lsdpfx Aeh Uhq Djaneak Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 1000x275x100mm Perpendicularity under 1µm! Laodpfx Aoix Ahxoanok Incl. Kunz vacuum slide and Mahr measuring probe Measuring protocol on request against surcharge

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t Laedpfx Aoncfpbeanok polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons negotiation on site always in French, English by appointment or by e-mail translator

Year of construction: 2024, condition: new, Stone circular saw with the ability for straight and 45° angle cuts. Basic version supplied with a tilting work table up to 85°, without table rotation, which significantly reduces the final price of the machine. Monoblock construction eliminates additional costs such as foundation pouring under the table, and allows for the machine to be relocated at any time. Tilting head 0°–45° with rotation 0°–90°. Due to its weight, the machine is exceptionally sturdy and stable. The machine is equipped with automatic central lubrication and helical gears, resulting in much quieter operation and increased longevity. Maximum saw blade diameter is 650 mm. The machine uses only highest quality components from Siemens and Schneider. Control is provided via touchscreen, joysticks and panel buttons, as well as wireless remote control. The main motor is equipped with a frequency inverter for smooth speed regulation. Cutting modes: Ledpfx Aajg I Dnijnsak ✅ Manual – in manual mode, the machine is operated mainly via joysticks on the control panel. There is also an option to move the head by a specified distance along a given axis ('manual move distance'). This makes it possible to precisely shift the saw edge, e.g. by 200 mm to the right. ✅ Automatic – in automatic mode, up to 12 cutting programs can be stored on the X axis (left-right) and Y axis (forward-backward). Additionally, it is possible to choose whether the saw will return to its home-safe position after completing the cutting program. Machine description: ✅ Monolithic base with two horizontal beams – replaces foundations; no additional costs (pouring foundations under the table or load-bearing walls), with relatively easy relocation at any time ✅ Robust main gantry – cast iron construction ✅ Tool head tiltable up to 45° with integrated laser ✅ Monolithic steel base with two horizontal beams (replaces foundation) ✅ Worktable tiltable up to 85° ✅ Tool head tiltable up to 45° with laser ✅ Table tiltable up to 85° ✅ Simple and quick machine programming ✅ Manual and automatic operation modes available ✅ Electrical cabinet components based on Schneider and Siemens components Axis movements: ✅ X axis – cutting movement right-left Tool carriage movement on the gantry, driven by helical rack and pinion; linear guide bearings ✅ Y axis – bridge movement forward-backward Bridge movement along horizontal guides, driven by helical rack and pinion; linear guide bearings ✅ C axis – head rotation Head rotation with blade from 0° to 90° ✅ A axis – blade tilt Blade tilt 0°–45° ✅ Z axis – vertical blade movement Hydraulic drive ensures accuracy and precision of cuts, manually set limit switches

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 900/350 K, 230 Volt With or without miter table K Quality machines up to 110 mm cutting depth, ideal for natural stone Ljdpst Hvmkefx Aanjak and gardening companies, pavers and stonemasons. Easily movable, lockable cutting unit with handy handle, Protective cladding with cooling water connections and splash guard Professional stone cutter With the STM models, ELMAG offers professionals a wide selection of flexible, high-quality stone cutters. In addition to the usual 'normal cut', these tried and tested machines also master heavy granite floor slabs and complex mitre cuts on steps or concrete and stoneware mouldings. The tried and tested details and working aids of these particularly robust, fully galvanized stone cutting machines meet the expectations of a modern, reliable machine with a long service life. All models are available with or without a mitre table and are optionally available with a 230 V AC or 400 V AC drive motor. available. ADVANTAGES Disc cooling with dosing valve Corrosion protection: fully galvanized design Pull-out water tray With infinitely adjustable mitre table 0 - 45° Very powerful drive motor Safety switch with zero-voltage release Easy transportation on plastic castors, four carrying handles TECHNICAL DATA Cutting capacity depth/length 110 / 900 mm Angle 0 - 45 ° Diamond cutting blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1350x780x1300 mm Weight 97 kg

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Lajdpfxjw R Uzis Aanjk

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Lsdpfx Aowyddgeanjak For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Opaque mechanographic paper EXPERIA DIGI NATURAL GREEN, reels of 60 gsm, width 52 cm, supplier Burgo, core diameter 70 mm, maximum external diameter 120 cm. 39 individually wrapped reels, total weight approx. 19,000 kg. PRICE EUR 0.75 per kg. Possibility of purchase in smaller lots. Lasdpfx Ajwyduxoanjk

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 Laodpoiiywzefx Aanek 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock.

Year of construction: 2023, condition: new, functionality: fully functional, Circular saw on steel walls for stone with the possibility of straight cutting and at any angle from 0° to 45°. Machine with a work table tilt of up to 85°, with rotation of 0° - 45° - 90° - 180° - 270°. The head tilts every 1° in the range of 0°-45°, without rotation, allows for cutting blades. Due to its weight, the machine is very solid and stable. The machine uses manual central lubrication and straight gears. The maximum diameter of the saw is 1200mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows for smooth speed regulation. A built-in laser can be used to set the cutting line. Manual limit switches were used on the Z axis to determine the limit positions. Laodpjqazbbefx Aanek Machine features: • Possibility of cutting at an angle of 0°-45° with a tilt of 1° Precise setting of the cutting angle every 1° enables a wide range of applications, from simple cuts to complex work with materials of various shapes. This solution is ideal for cutting blades, which makes the machine extremely versatile. • Tilting work table (0°-85°) and full table rotation (0°-360°) The work table with an angle of inclination of up to 85° allows convenient and safe processing of heavy blocks of stone. Additionally, full 360° table rotation with stops (0° - 45° - 90° - 180° - 270° - 360°) allows precise positioning of the material without the need to reposition it. • Laser cutting line indicator The built-in laser indicator facilitates precise positioning of the material and cutting line, which increases work accuracy and reduces the time required to prepare for cutting. • Touch control and joysticks The machine is equipped with a modern Delta touch panel and joysticks for manual control, which makes operation intuitive, and adjusting operating parameters to the operator's needs quick and precise. • Solid, heavy construction The DSL-1200 45Q circular saw is very massive, which ensures stability during operation, even when cutting large and heavy blocks of stone. This stability increases cutting precision and reduces vibrations, which translates into higher cutting quality. 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine working "live"

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Laodpet Egfzofx Aansk Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Year of construction: 2023, condition: new, functionality: fully functional, The SHAMP-3200 single-head stone polisher, automatic polisher, is a professional machine that is used for polishing, grinding and brushing the stone surface and calibrating the thickness using diamond wagons. The monoblock construction ensures no additional costs such as pouring foundations for the table. An additional advantage is the ability to move the machine to another place at any time and the ease of installation. The single-head, bridge-type stone polisher is convenient to use and allows for quick and effective polishing work on most stone surfaces. The slide is guided by a linear guide immersed in oil, with long service life, high machining accuracy and an advanced control system. The machine is equipped with a PLC controller and high-quality components: Xinje touch screen, Zhengtai contactor, Schneider switching power supply, Omron relay, Omron proximity sensor. In the SHAMP-3200 polishing machine we can process stone with a thickness of 10-120 mm. Grinding head with the possibility of mounting 6 polishing wagons. Pneumatic pressure with an air demand of 0.6m³. Z axis travel equal to 110mm. The limit switches are set manually. Laodpog Iph Rofx Aanok The machine has a tilting work table up to 85° (hydraulic lifting), which greatly facilitates the loading of stone in machines of this type. This allows for easy and quite precise positioning of the stone in the appropriate position for grinding. The machine uses separate inverters to regulate the feed speed on the X axis and the Y axis. Their power is appropriately adjusted, so you can precisely control the axis feed speed, which is particularly useful in this type of stonemasonry machines.

Condition: ready for operation (used), Year of construction: 2023, General Data Laedpfox I S Rwex Aanek Machine weight 1800 kg Measurements height 2200 mm Dimensions Machine Length 1440 mm Main Drive Number of axis 3 Pressing force 220 Kn This 3-axis Coastone Cone C9 press brake was manufactured in 2023. It features a C-frame design, a pressing force of 220 kN, and a maximum bending length of 900 mm. Equipped with an Omron Touchscreen TC15-2D CNC control and Amada Promecam tool clamping system, it ensures precision and ease of use. Located in Slovenia, it comes with a complete bending tool set and a 36-month warranty. Consider the opportunity to buy this Coastone Cone C9 press brake. Contact us for more information. Application Types Bending

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 5 h, machine/vehicle number: C9100358, control type: NC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 22 t, working width: 900 mm, stroke length: 270 mm, distance between stands: 850 mm, installation height: 470 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, number of axes: 3, type of crowning: manual, overall weight: 1,800 kg, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment! Lodex At H Tepfx Aanoak