Used Natural Stone for sale (1,505)

Year of construction: 2025, condition: new, functionality: fully functional, Unused, brand new CHP unit with a TOYOTA 4Y engine, all-in-one design, employing a “plug and play” concept for easier and cost-effective installation, a user-friendly interface, a safety module for enhanced hardware protection, and a single-bearing generator to minimize potential engine damage. This 20 kWe CHP unit is ideally suited for locations with a continuous demand for both electricity and heat. The key to CHP’s economic viability lies in utilizing the heat generated in conjunction with electricity production. Product location: Indop, d.o.o., Primorska 6a, 3325 Šoštanj, Slovenia. Isdpezl H Atjfx Ahnjtl

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 Itjdozu Nvzjpfx Ahnsl - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: B05-991, We offer this ready for use Zahoransky V10 Zahoransky B05-991, year of construction not specified. Manufacturer: Zahoransky Model: V10 Condition: ready for use Category Id: 33 Type: Zahoransky B05-991 Vertical manual brush tufting machine, Zahoransky type V10 Stoke: 100mm Fillament length: 210mm unfolded, processing synthetic and natural filaments Itedpfszzrpqjx Ahnel Fillament boxes: 1 color Tufting tool: 7.0 mm and 10.0 mm ( one tool set included ) Condition: ready to operate If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Iedpfsi Ab Akex Ahnotl Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply: Itjdpjzhvagefx Ahnsl  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Oferuję używaną prasę hydrauliczną renomowanej marki Obolith, przeznaczoną do produkcji elementów betonowych, takich jak pustaki, bloczki, cegły itp. Dane techniczne: • Producent: Obolith Itedpfxswpxyne Ahnel • Typ: Prasa hydrauliczna / wibroprasa • Napęd: Elektryczno-hydrauliczny • Stan: Używana, sprawna • Zasilanie: 400V • Solidna, stalowa konstrukcja • Wbudowana forma (możliwość wymiany na inną) • Pulpit sterowniczy z wyłącznikiem awaryjnym • Możliwość uruchomienia na miejscu.

Condition: new, functionality: fully functional, power: 315 kW (428.28 HP), fuel type: electric, color: other, overall weight: 25,300 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping • Hydraulic setting system Iedpezlta Eofx Ahnstl TECHNICAL SPECIFICATIONS • Model: FABO PDK-150 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1500 mm • Max Feeding: 800 mm • Capacity: 300-600 TPH • Motor Power: Heavy duty GAMAK,315 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 25300 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t Iedpfx Ahencfpbsnotl polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons negotiation on site always in French, English by appointment or by e-mail translator

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2026, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. 8. Demolition and Dismantling Ijdpfxeq I N Iqj Ahnjtl Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Isdpsym Nzpofx Ahnetl Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Condition: excellent (used), Stone cutting saw with diamond blade Itedpfx Ahsw Evznenol

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Itodpfxsy N Rlvo Ahnol The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 345 h, functionality: fully functional, working width: 1,230 mm, area performance: 8,600 m²/h, overall weight: 1,944 kg, warranty duration: 12 months, water tank capacity: 310 l, sweeping width: 1,230 mm, HAKO SCRUBMASTER B310 R CL TB1230 SCRUBBER NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A CHARGER Manufactured in 2016 with 345 hours on the clock 1230mm cleaning head (TB1230) equipped with three new medium-hard disc brushes for work on any surface. Integrated pre-sweeper with new side brushes and a new cylindrical brush to remove loose dirt before the actual cleaning. New squeegee blades made of high-quality natural rubber are ideal for use on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's contours. The device is equipped with new, durable drain hoses and a new suction hose. New suction turbines ensure high water suction power from the squeegee blade. Each device we offer has individually taken photos; you get exactly what you see. TECHNICAL DATA: Working width (mm): 1230 Squeegee width (mm): 1260 Capacity (m²/h): 8600 Voltage (V): 36 Number of disc brushes (pcs): 3 Working speed (km/h): 7 Clean water tank capacity (l): 310 Dirty water tank capacity (l): 310 Weight without batteries (kg): 935 Weight (kg): 1944 Power (kW): 7.6 INCLUDED: NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A BATTERY CHARGER NEW pre-sweeper side brushes - MIX antistatic bristles NEW pre-sweeper roller brush - MIX antistatic bristles NEW 430mm PPL 0.5 disc brushes (3x) NEW 36V 600W suction turbines (2x) NEW drain hoses (2x) NEW suction hose Itodpfx Aey Ui Akjhnjl NEW head guard rubbers (2x) Squeegee blade with new rubbers Tenzi Normal 5 fluid 1000 liters - FREE KEY FEATURES: The 310-liter tank with a durable, flexible divider allows for large amounts of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (1230 mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Iedpfxstgpg Ie Ahnetl Opening width: approx. 2.60 m incl. CW55 adapter plate (e.g. for CAT 345)

Condition: new, functionality: fully functional, color: other, overall weight: 42,000 kg, Year of construction: 2026, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Ijdpoziba Ujfx Ahnstl Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS Itjdjzfyu Aepfx Ahnsl The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Available Immediately! PRICE: €7,500 negotiable, ex Dunkirk, France AT A GLANCE: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, heavy-duty power, awning ✅ Ready for immediate delivery – only 2 units available! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – perfect as office containers, site containers, or storage containers. The containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready to use. The condition is guaranteed and will be documented on the invoice. Overview of equipment: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning ✅ Electric awning 3x7 m with remote control ✅ Heavy-duty power connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original photos – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (without unloading): upon request ✅ Immediate availability: 2 units ex Dunkirk, France Contact us now to inquire & reserve! We will gladly provide additional photos, technical drawings, and details upon request. Ijdpez Apn Hsfx Ahnjtl NAUTEXA GmbH

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles Ijdpjyrr Uvjfx Ahnstl automatic lubrication 2 roller tables of 2mt. each Very good condition

Year of construction: 1989, condition: ready for operation (used), A grain screening machine (vibrating screening machine) Främbs & Freudenberg for the mining industry for separating aggregates is available. Number of screen decks: 1, drive power: 7.5kW, speed: 1060rpm, lubrication: oil, oil filling quantity: approx. 2l, screen area X/Y: 4000mm/1500mm. Without screen lining. An on-site inspection is possible. Itedpfx Asy R Dtvshnol

Condition: like new (used), Year of construction: 2022, functionality: fully functional, PAVESI PIZZA OVEN – Like New | Professional-Grade Equipment for the Food Service Industry | Year of Manufacture 2022 Isdpfx Aezl A R Tjhnstl For sale is a high-quality Forni Pavesi Rimini pizza oven, manufactured in 2022, in like-new condition. The oven has been used very little and is stored properly. Technical details: • Manufacturer: Forni Pavesi Rimini (Made in Italy), • Operation: Natural gas (Avanzini Bruciatori Drago burners, models D1/S + D2) • CE certified, all conformity documents available (Kiwa, DVGW) • Cladding: Red mosaic • Includes pizza peels and accessories • Ready for immediate use Condition: Like new, hardly used, stored professionally Price: €9,900 (negotiable – offers are welcome)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, Jaw crusher, used Manufacturer: Skoda Type: 1017 / 1200 x 900 Feed opening: 1000 x 700 mm Ijdpjyluqysfx Ahnotl Discharge size: 130-250 mm Electric motor: 130 kW Feed hopper Conveyor belt with transfer hopper

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Ijdpfx Ahjh Uhq Denjtl Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: used, mileage: 1,774 km, power: 184 kW (250.17 HP), first registration: 06/2026, overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 06/2027, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 single-tire special chassis, registered in June 2026 for heavy-duty off-road use. All-wheel drive 4x4 with all locks and a wheelbase of 4.50 m, single tires, high chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, and more. With MAN manufacturer's warranty. Equipment: TND double cab with 3 seats High chassis All-wheel drive 4x4 Wheelbase 4,500 mm Mileage approx. 1,774 km (delivery kilometers) Single tires Suitable for superstructures up to approx. 6.20 meters Unladen weight 6,780 kg Payload 10,720 kg with a permissible total weight of 17,500 kg Engine MAN D0836 LFLBN with 250 hp Euro 6 e Differential lock in front and rear axles Iodpfjzb Svrox Ahnjtl Transfer case MAN G102 with road and off-road modes Electronic transfer case lock management (VSM) MAN PowerMatic 08.13 OD automatic transmission Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency up to 70,000 kg Driving program MAN TipMatic Offroad up to 70,000 kg Driving program MAN TipMatic Emergency Air conditioning Auxiliary water heater, 4 kW Trailer coupling, Ringfeder Type RF40/G150B with air pressure connections Permissible total weight of towing vehicle 28,000 kg Trailer load 16,845 kg Trailer load for center axle trailer 16,000 kg Front and rear axles with leaf springs Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention warning system MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150-liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Instrument cluster Professional 12.3 inches Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver seat package Premium, air-suspended; Co-driver seat package Plus Air-suspended driver's comfort seat with lumbar support and shoulder adjustment Air-suspended comfort middle seat with integrated seat belt system, positioned further back Air-suspended co-driver's comfort seat New vehicle with registration in June 2026 and MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing options. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2581

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information Itodpswcl Ulefx Ahnjl • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,420 mm, total width: 2,550 mm, total height: 3,390 mm, Year of construction: 2021, Equipment: ABS, * Saddle height approx. 1270 mm * Foldable underrun protection * Towing hook at the rear * Camaro convertible top, electric drive with remote control * SAF axles, off-road version * Disc brakes, 430 mm diameter * Air suspension * 1st axle as a lift axle (automatic and can also be operated from the truck) * Lift axle with forced lowering and starting assist * Polished aluminum rims * LED lighting * Hydraulic system, low-pressure cylinder, 170 bar * Rear wall with hinged flap * Side wall, 4 mm thick, continuous * Floor, 4/5 mm thick * Dump body color: steel gray * Frame color: nova gray * Support legs, galvanized * Aluminum ladder, 3300 mm with bracket * Broom and shovel including bracket on the front wall * SP 06.2027 Itodpfx Aozvz Thohnsl * And more * Subject to errors, changes, and prior sale