Used Nef Lather for sale (215)

Condition: used, mileage: 2,03,359 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of manufacture: 2021 Field of application: Freight transport Engine capacity: 1.950 cc General condition: poor Technical condition: poor Visual appearance: poor Production country: DE Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2021 Condition: Used Data: First registration: 07.12.2021 Mileage: 203.359 KM Fuel type: Diesel Gear type: Automatik Drive type: All-Wheel Drive Engine power/displacement: 140 kW / 1.950 cm³ Colour: Color: White with vinyl decals Seats: 3 Environment badge: Green / Euro 6 Total permissible weight: 3.200 kg Equipment: Airbag, ABS, ESP, power windows and side mirrors, automatic climate control, radio, power steering, daytime running lights, central locking. Information: In accordance with DIN 75059: pressure-chamber loudspeaker, Martin system, LED signaling system, accident data recorder, hands-free cell phone kit, doctor's seat, work table, heated compartment, refrigerated compartment, cabinet in the rear section. Additional Information: Transmission damage; defective tailgate; cannot be opened. Bwsdpfx As Ad Dzbeknew Price on demand Location: 41468 Neuss: immediately available

Condition: good (used), mileage: 1,80,827 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of manufacture: 2020 Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Production country: DE Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2020 Condition: Used Bwsdpj Aavivefx Aknow Data: First registration: 26.08.2020 Mileage: 180.827 KM Fuel type: Diesel Gear type: Automatik Drive type: All-Wheel Drive Engine power/displacement: 140 KW / 1950 cm³ Environment badge: Green / Euro 6 Colour: Color: White with vinyl decals Seats: 3 Total permissible weight: 3.200 kg Equipment: Daytime running lights, automatic climate control, airbag, power windows and side mirrors, central locking, ABS, ESP, radio, power steering, Backup camera. Information: In accordance with DIN 75059: pressurized chamber speaker, Martin system, LED signaling system, accident data recorder, heated compartment, refrigerated compartment, hands-free cell phone kit, cabinet in the rear, doctor's seat, work table Additional Information: visible signs of use, scratches, dents. Location: 41468 Neuss: Available immediately

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Bwsdpfx Asyrggmeknsw Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Bwedpfewtct Hsx Aknsw Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: reconditioned (used), Year of construction: 2003, Turning machine Gildemeister Type/Model: DMG NEF 320 K Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 2003 The machine was completely disassembled, cleaned, geometrically overhauled, repainted, and reassembled. The machine bed and guides were professionally refurbished. All slides were inspected, adjusted, and set. The main spindle, gearbox, feeds, tailstock, coolant system, as well as the electrical and mechanical functions were checked. Finally, a geometric measurement with a test protocol according to DIN 8605 was carried out, as well as a test run under realistic conditions. Features Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical data Swinging diameter over bed: 320 mm Swinging diameter over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed rate AC: 4 m/min Spindle mounting: MK 6 Turning spindle size: 6 Speed range: 14 - 3550 min-1 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle in front bearing: 85 mm Tailstock quill: 70 mm Tailstock quill mounting: MK 5 Tailstock quill travel: 120 mm Max. torque: 320 Nm Speed range: 14 - 3,550 1/min Gear stages: 2 Drive power: 7 kW Bjdpfxowlhn Ho Aknsww Tool holder: Multifix size B Dimensions (L x W x H): approx. 2600 x 1440 x 1800 mm Weight: approx. 1500 kg Inquiry item: Transportation costs will be provided in a separate offer.

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min main drive motor 7 kW 3-jaw-chuck diameter 200 mm Bjdpfxjyutuco Aknsww total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2003, turning diameter 500 mm turning length 1000 mm control Heidenhain weight of the machine ca. 3200 kg t Bjdpfx Akezc Ryronjww

Condition: good (used), Year of construction: 2001, turning diameter 320 mm turning length 750 mm control Heidenhain Manual Plus Number of working hours 18632 h longitudinal slide -travel 8/5000 mm face slide travel 8/5000 mm/min rapid travel - longitudinal/face 8-10 m/min power feed longitudinal 6000 N power feed coss 3000 N weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m Working Area: - Center height — 160 mm Bwedpfx Akszp Rw Aonow - Center distance — 750 mm - Max. swivel diameter over bed — 320 mm - Max. swivel diameter over cross slide — 150 mm Work Spindle: - Spindle head DIN — 55027 - Size — 6 - Internal taper — MK6 - Spindle diameter at front bearing — 85 mm - Spindle bore — 52 mm - Max. chuck diameter — 200 mm - Max. torque — 420 Nm Support: - Tooling system — Multifix - Tool cross-section — Size B - Number of bed slides — 1 - Number of cross slides — 2 - Longitudinal stroke — 700 mm - Cross slide travel — 185 mm Tailstock: - Quill taper — MK5 - Quill diameter — 70 mm - Max. quill travel (manual / automatic) — 120 / 8 mm --> Footprint — 2540 mm × 1690 mm

Condition: used, Year of construction: 2001, turning diameter 320 mm Bedpfoyqtdisx Aknsww turning length . mm control Siemens type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Bsdjyyniajpfx Aknoww Technical details are shown on picture.

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Bwjdpfx Asx Uq Uhoknjw

Condition: good (used), mileage: 1,74,090 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of manufacture: 2020 Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2020 Condition: Used Data: First registration: 08/2020 Fuel type: Diesel Mileage: 174.090 KM Gear type: Automatic Drive type: all-wheel drive Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Environment badge: Green / Euro 6 Colour: White with Foil wrap Bwjdpfxozfzgyo Aknjw Equipment: Automatic front flashers, Automatic air-conditioning, Sitzplätze: 3, Airbag, Power windows and side-view mirrors, Central locking system, ABS, ESC, Radio, Power steering Information: After DIN 75059: Pressure chamber loudspeaker, Martin-System, LED-Signalsystem, Accident data storage, Thermal compartment, Refrigerator compartment, hands-free mobile phone system, Closet in the rear area, Doctor's seat, work table Location: 41468 Neuss immediately available

Condition: used, mileage: 1,91,000 km, power: 140 kW (190.35 HP), first registration: 06/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 2,020 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, First owner – German fire department. Only 191,000 kilometers driven. Until recently, it was in regular service and stored in the heated vehicle depot when not in use. Base vehicle: VITO MIXTO 119 CDI 4matic 4x4. Long wheelbase: 3200 mm. Sliding doors on both sides with electric closing assist and soft-close function. WAS conversion into an emergency ambulance / emergency medical response vehicle (NEF) with a refrigerated compartment, drawers, and various cabinets. 3 seats registered and available as the current operational vehicle / quick-release system for seat rails. Regular inspections performed by WAS. Diesel engine with 140 kW / 2143 ccm and Euro 6 emission standard. 7-speed GTronic automatic transmission. Automatic climate control. Auxiliary heater. Attention Assist drowsiness detection. ABS+ASR, ESP, lane keeping assist / crosswind assist, hill-start assist, cruise control, multifunction steering wheel, MB emergency call system, etc. Central locking with remote keys (4 original keys included). Unladen weight according to vehicle documents: 2705 kg. Permissible total weight: 3200 kg. Overall length: 5.14 m / width: 1.93 m / height: 2.02 m. Special signal system: HÄNSCH DBS5000 / front warning light StandbyL54 / HÄNSCH 620 with Martin horn. Retroreflective rear warning markings from design112. Speed limiter set to 160 km/h. Bwodpfx Aksyxunyenow The Vito currently has winter tires installed. It has a set of 8 tires, the second set of tires on rims is included as shown in the pictures. The tire size is 225/55R17C. The vehicle is ready for immediate use and in good condition. The Vito runs very smoothly and without any faults. Last service at Mercedes-Benz was at 178,000 kilometers. No error messages. The TÜV (technical inspection) expired in 06/2026, and although it was otherwise in good condition (inspection report available), it still failed the inspection... because the measured particulate count was too high during the emissions test, which is considered a "significant defect" for Euro 6 vehicles... However, the Vito had been standing for a few days before the measurement and was apparently not warm enough. After consultation and possibly with a new DPF, the vehicle can also be sold with a new technical inspection. Various documents relating to the special fittings in the vehicle, the WAS inspection book, the COC certificate from Mercedes, and the individual approval from 2020 as a German emergency vehicle are included as original documents. This offer is only valid for commercial businesses of all kinds as well as for all emergency services / authorities. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. Purchase price according to §25a UStG (German VAT Act) with differential taxation, i.e., gross = net. No additional 19% VAT needs to be paid. At the same time, the VAT cannot be deducted separately from the purchase price. We will also accept your old emergency vehicle in part exchange. Please contact us for details. This NEF is available immediately.

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t Bsdsyqwb Eepfx Aknoww dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter 710 mm turning length 2000 mm control Heidenhain type Manuel Plus turning diameter over slide 410 mm x-travel 385 mm turning speeds 9-1800 U/min transmission ratio 2 drive capacity - workpiece 22 kW Torque 2500 Nm spindle diameter 160 mm spindle passage 92 mm total power requirement 49 KVA weight of the machine ca. 5,6 t dimensions of the machine ca. 5x2x2,2 m Spindle nose DIN 55027/11 Toolholder: Type MultiFix C Tool holder Capto C4 Tailstock: Tailstock mount MK 6 Quill diameter 110 mm Quill stroke 210 mm Feed rates: Rapid traverse (X/Z) 8/10 m/min Maximum feed rate 5,000 mm/min Maximum feed force 2,000 daN The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Bjdpfx Asyqtnbeknsww

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. Bwodjz Ag Ukepfx Aknow If you have any questions or require more information, please send us a message or call us.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Bjdpfx Akovn Rlzsnjww Including chip conveyor Including complete documentation Immediately available from stock

Condition: used, Year of construction: 2018, functionality: fully functional, Edge banding machine, Format 4 Tempora F600, Type 60.06L with Smart-Touch Year of manufacture: 2018 From an insolvency, therefore no further technical data available. Please submit a bid. Location: Freising Inspection welcome. Sale to the highest bidder. Bwsdpe Aaz N Uofx Aknjw We have other used machines available. Please contact us.

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Bwsdpszt I Rujfx Aknsw

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Bwedexw Ux Hspfx Aknjw Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Bwjdpfxjygmhto Aknjw

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Bjdpfx Akoyxm Tnenjww Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: used, mileage: 1,12,000 km, power: 103 kW (140.04 HP), first registration: 05/2009, fuel type: diesel, overall weight: 2,210 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 4,505 mm, total width: 1,794 mm, total height: 1,694 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 1st owner. Only just over 112,000 total kilometers with service booklet (last service 02/2026 at 110,216 km at a VW dealership). Most inspections were carried out at an authorized VW service center. New TÜV (German technical inspection) valid until 10/2028. Directly from the fleet of a German aid organization. Many of the components that typically need replacing on a VW Touran have already been replaced recently: 2026: New turbocharger 2023: New timing belt 2023: New clutch and new dual-mass flywheel 2023: New front brakes and new rear brake pads The Touran was delivered in the fire department and disaster relief version. It has a STROBEL conversion as an emergency response vehicle with rear-mounted storage, drawers, and a partition grille. LED light bar on the upper part of the tailgate. Previously registered as an NEF (emergency medical response vehicle) "other type of vehicle". 5 seats. Equipped with a special signaling system. Off-road chassis as standard. 8 tires (including rims). Air conditioning. Auxiliary heater (already renewed). Bsdpfx Aksz Iuztjnsww Audio system. Cruise control. ABS. ESP. Brake assist. Airbags for driver and front passenger, as well as side airbags. Central locking/remote control (2 original VW remote keys included). 2.0 liter - TDI diesel engine, Euro 4. Green environmental badge. 6-speed manual transmission. 200 km/h maximum speed according to documentation. Additional turn signal lights at the top rear. The Touran is in good condition. It was recently driven to us without any problems for almost 400 kilometers on the highway. The VW has no unusual noises and no error messages. The Touran runs very smoothly and powerfully. The regular maintenance over the years has paid off. According to the aid organization, the power supply located at the bottom left at the rear is currently not functioning. We were unable to verify this ourselves due to a lack of a suitable connection cable. Signs of use are present, but damage and accidents are not known. A suitable set of snow chains is also included in the vehicle. The currently mounted, good winter tires with the snowflake symbol are from CONTINENTAL and have a DOT code of 2022. The Touran is available immediately. This offer is only valid for businesses, freelancers of all kinds, as well as for authorities / emergency services / aid organizations of all kinds. Unfortunately, we do not sell to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net (=differential taxation according to §25a UStG. This means that no value-added tax is added to this purchase price and, at the same time, the VAT cannot be calculated separately).

Year of construction: 2009, operating hours: 4,300 h, condition: excellent (used), functionality: fully functional, Used Komptech 3000 Stonefex Year 2009 4300 Hrs Bjdpoziqf Tefx Akneww Diesel Generator + Electric Plug n Play

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for slabs still active and fully functional, viewable and equipped with: - automatic loading unit - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs Bodpfexdnbbjx Aknjww - automatic waxing machine - automatic protective film applicator