Used Neophot 2 for sale (77,793)

Condition: used, Year of construction: 2020, Becker BZ-2 Atomic – Packaging System - 2 identical, mirror-inverted packaging lines available - Without cutting machine - Year of manufacture: 2020 In this system, the cardboard is first trimmed at the front to remove any potential transportation damage. After edge trimming, a side trim of at least 30 mm is performed on both sides. If necessary, corners are also cut from the cardboard, depending on the FEFCO type. Finally, the cardboard is creased along the fold lines and conveyed out of the machine. Waste generated during the process is transported out of the machine via a waste conveyor belt located underneath. At the machine’s discharge end, a conveyor belt removes the waste into a container. If the edge trim is too long, it must be cut inside the system to ensure trouble-free removal from the machine. The cut blanks and products are conveyed to the folding table where cartons are erected and filled. In the Box Closing Unit, the cartons are closed, labeled, and discharged from the system. Machine components (see diagram): (1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: - Sound pressure level: < 70 dB(A) - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Main fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V Cjdpfx Absygipmecegn - Compressed air supply: 6 bar - Air consumption: 10 l/min - Machine dimensions (W x H x D): 21,260 x 4,000 x 18,030 mm

Condition: used, Year of construction: 2014, machine/vehicle number: CA76, Technical Specifications & Performance Data The Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application. Manufacturer: Robino & Galandrino Model: Fenix 2 Year: 2014 Machine category: Capsuling machine Schema/code: FEX750 Electrical supply: 400 V, 3-phase Frequency: 50 Hz Nominal current: 6.5 A Typical application: Capsule application on bottles in beverage production lines Advanced Automation & Control Systems The Fenix 2 supports straightforward integration with modern line controls. Its 400 V 3-phase, 50 Hz electrical configuration is standard across European bottling equipment, simplifying installation alongside PLC/HMI-managed production lines. Designed for repeatability and operator efficiency, the machine supports clear operational states, standard interlocks, and controlled application parameters that help maintain consistent capsule quality. Production Line Integration Capabilities This capsuling machine is intended for inline operation as part of an industrial packaging system. It interfaces effectively with upstream and downstream modules such as corking/capping stations, labeling machines, and conveyors. The machine’s robust frame and standardized electrical architecture allow integration into a used bottling line or a mixed-manufacturer production line for beverages. It is suitable for configurations handling glass bottles commonly found in wine and premium beverage packaging. Csdeyhbi Iopfx Abcjgn Machine Condition & Maintenance History As a second hand, 2014-manufactured unit, the Fenix 2 offers a solid balance between modern engineering and proven field reliability. It suits facilities seeking dependable capsuling performance within an established beverage production process or upgrading an existing used bottling line. Maintenance routines typically include capsule feed verification, head alignment checks, and inspection of wear parts to preserve application accuracy and throughput. Operational Performance & Versatility The Fenix series is recognized for stability in capsule application on bottles used in wine and premium beverage packaging. It is designed for precise placement and consistent shrink/application characteristics, supporting high-quality presentation standards demanded by beverage production. The machine is compatible with standard conveyor handling solutions for glass containers and is adaptable to different line layouts and speeds determined by upstream/downstream equipment. Installation Requirements & Site Preparation Installation requires a stable production floor, 400 V 3-phase 50 Hz electrical service, and alignment with existing conveyor and line control systems. The machine should be positioned to allow safe operator access for loading capsules, adjustments, and routine ...

Condition: used, functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 8,400 kg, Year of construction: 2019, operating hours: 1,643 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Codpfx Absyfkzuscogn Technical condition: Very good Description: Crawler excavator TAKEUCHI TB 290-2 – - KNICKER – - Year 2019 – - 1,643 operating hours – - hydraulic quick coupler – - MARTIN POWERTILT – - 3 digging buckets 30cm + 60cm + 90cm – - 1 ditch-cleaning bucket 150cm – - 4-cylinder Yanmar TURBO diesel engine 51.6 kW (70 HP) – - AIR CONDITIONING – - rearview camera – - refueling pump – - long reach arm – - excavator in very good condition – - rubber tracks approx. 80% – - Inspection and test digging possible on site – - Affordable delivery options! Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 1995, Hydraulic Press Brake Fab. MENGELE Type: H 80-2 Year: 1995 Technical Data Make: GWF-Mengele Type: H 80-2 Year of manufacture: 1995 Pressing force: 80 t Bending length: 2,550 mm Frame gap: 2,060 mm Table width: 180 mm Throat depth: 250 mm Stroke: 200 mm Oil capacity: approx. 250 L Operating pressure: 235 bar Dimensions: approx. L 3.85 x W 2.20 x H 2.70 m Weight: approx. 6.2 t Equipment • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Cybelec DNC 800 CNC control • Amada tool clamping system • Automatic upper and lower tool clamping • CNC crowning • CNC die shifting Cjdpsyhc Husfx Abcogn • Support arms • Upper tool, straight, R 0.8 mm, L = 2,350 mm • Lower tool V8/V12, L = 2,350 mm • Operating manual All details without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2017, Dimensions: 2.4 x 2 x 2 m Drive power: 2 x 18.5 kW Number of knives: 2 x 72 Rotor diameter: approx. 354 mm Rotor length: 1,000 mm Screen size: 10 mm Weima shredder type HWN-2-1000 for the reduction of wood and similar materials such as plastics or cardboard. Codsxvzzxopfx Abcjgn The machine stands out for its robust construction, large feed hopper, and two powerful rotors for continuous material intake. Optional with new knives at an additional cost.

Condition: used, Bore: 40 mm Cutting circle (ø): 125 mm Cjdpowma T Rjfx Abcjgn Length: 240 mm Material: aluminium Blades: strip planer blades Z2

Condition: used, Available: No. 1 and No. 2 Cgodst Snzwspfx Abcsn Used control cabinet from a Weinig Uniplan model, suitable as a spare parts donor or for rebuilding a control cabinet with operator panel.

Condition: used, Working width: 230 mm Working height: 120 mm Counter support: Yes Jointer: Yes Short piece package: Yes Spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) Spindle speed: 7,200 rpm Spindles: 2 Spindle diameter: 50 mm Cjdpfx Aot Rmbmsbcjgn Feed: 3 kW // max. 36 m/min Hydro finish planing machine Weinig Uniplan 23 for double-sided surface finishing, as an alternative to sanding (e.g. in window manufacturing), with high-performance spindles. - Very good original condition

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Cjdpfxowhkf He Abcsgn

Condition: used, empty load weight: 4,140 kg, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 235/75R17,5 143/141J, color: other, gearing type: other, front tire size: 235/75R17,5 143/141J, rear tire size: 235/75R17,5 143/141J, driver cabin: other, emission class: none, Equipment: ABS, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Cedoyg Drpopfx Abcegn

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Csdpfovcf Rnex Abcsgn Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: new, Brand new, never used!!! Cgjdpfx Abjww Utaecen Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated load: 210 kg Max load: ~270 kg Net weight: 1107 kg Controller: KRC4 Pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series).

Condition: new, Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated payload: 210 kg Cedpjxnbafefx Abcegn Max payload: ~270 kg Dead weight: 1107 kg Controller: KRC4 Teach pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial number: 1077132.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2367, total width: 1,235 mm, total length: 2,840 mm, total height: 1,660 mm, input current: 230 A, type of input current: DC, table width: 360 mm, table length: 450 mm, overall weight: 450 kg, operating speed: 1,000 mm/s, input frequency: 50 Hz, Tajima TFMX II C1206 Cedpfx Asygqu Debcegn

Condition: new, Year of construction: 2015, functionality: fully functional, Dimensions: 1,500 x 600 mm Cedpfx Absyg Ed Hscogn Passage width x height: 1,300 x 300 mm Working width: 1,000 mm With spacer frame and control electronics 650/2 S-2 Year of manufacture: 2015 – still unused and in original packaging

Condition: excellent (used), Catalogue number 7840 TECHNICAL DATA - max working width: 630 mm - max working height: 110 mm - 2 units: 1) grooved rubber calibration roller 2) grooved rubber calibration roller + pad + metal roller - from above: - metal feed roller, sliding - unit - metal sliding roller - unit - metal sliding roller - from below: - 2 metal sliding rollers - feed belt - 2 metal sliding rollers Cgsdpfeydb H Sex Abcjn - pneumatic belt oscillation - 2 feed speed options - motor: 2×7.5 kW - electric table lift - working pressure: 6-8 bar - extraction connection diameter: 2x160 mm - overall dimensions (L/W/H): 1650x1060x1970 mm - weight: 972 kg ADVANTAGES – Polish production – 2 working units – Unpainted – Very good condition – Used sander Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg Cgodpjxwyhtsfx Abcsn – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Year of construction: 2001, Heidelberg Quickmaster 46-2 Cgsdpfx Abjygubnjcen Format: 46 x 34 cm Available at short notice

Condition: new, The 2 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 10 kN and a throat depth of 145 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a robust offering from KNUTH, the 2 T Workshop Press stands ready for your pressing needs, allowing you to handle tasks with efficiency. Don't hesitate to order online and enhance your toolkit with this reliable Manual Workshop Press today. Cgedpfxou E I E Re Abcjn

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Cedpfeyaqtaox Abcogn Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg

Condition: used, empty load weight: 4,820 kg, maximum load weight: 13,180 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 54 m³, suspension: air, tire size: 235/75R17,5 ---/141K, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141K, rear tire size: 235/75R17,5 ---/141K, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Forklift bracket, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpfx Absygrq Hecjgn

Condition: new, empty load weight: 2,520 kg, maximum load weight: 7,980 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 650 mm, wooden floor, 2 x ramps (2,500 mm long x 500 mm wide), ramps with spring lifters, ramps with gratings, 10 x lashing eyes, geared support winch with load and fast gear, front, 2 x supports, rear, chassis and body hot-dip galvanized, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Codpfeygrp Aox Abcjgn

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgsdpjygrm Uefx Abcen

Condition: used, Schneidmaschine / Gullotine Wohlenberg 92 MCS-2 TV Baujahr / Year 1989 - Serial-No. 3277-029 Schnittbreite / Cutting width max. 920mm Monitor - Programm Cgjdpfxjwgxbye Abcon Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Sheet-Fed Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included Codpfx Aexzk Uxjbcjgn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test