Used Niles for sale (66)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Knjdpfew Dbndjx Aabec Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Supply fuse: 250 A Total weight: 31.0 t

Condition: good (used), Year of construction: 2013, control Siemens 840D sl Knjdsv Nw Npepfx Aaboc turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: not inspected (used), Year of construction: 1986, functionality: not functional, 2 machines as spare parts donors. Servomotors Kodjixtm Nepfx Aabjnc MAIN SPINDLE MOTOR CHIP CONVEYOR CHUCK HYDRAULIC UNIT PRICE per ton

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery Knjdpfx Aajv N Razebsc if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm Kjded Irazjpfx Aabenc -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 4,500 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 5,200 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates timely collection by the end of September! Turning and milling center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 4,500 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Travel paths Travel - x2: 875 mm Travel - z2: 5,200 mm Control: SIEMENS - 840 C MACHINE DETAILS Kodpfx Asw Da R Dsabonc Electrical data Power type/Frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 170 kVA Rated current of the machine: 220 A Total weight: 40.0 t

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm Knodpswwarusfx Aaboc taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks Knsdsd Itclopfx Aabsc -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -recess recess: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg Knodpfx Aed Ew T Ajabec

Condition: used, Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg Knjdpfxeb A Ryfe Aabjc

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm Knjdpfx Aaedrwlxsbsc -Number: 3x available -Price: per piece -Weight: 18 kg

Condition: used, Swivel lining, 3- cheek lining -Type: DHB 200x3x5 TGL 30 2332 -Feed size: Ø 200 mm Knjdpfx Aasdtap Robsc -Passage: Ø 54 mm -max.: 3000 Rpm -Short cone recording: Ø 105 mm -Weight: 24 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Thread recording Knedpfx Aed Im S Heabsc -Through hole: Ø 53 mm -Weight: 19.7 kg

Condition: used, Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg Ksdpsd It H Refx Aabenc

Condition: used, Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Rezess: Ø 155 mm -Hole circle: Ø 174 mm -Through hole: Ø 57 mm Kedpfx Aasb A Slhebjnc -Weight: 12 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg Kedpfjd Ew Txox Aabenc

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Knedpfx Asd R Hrdsabec -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: used, Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 9x discs available -Price: per piece Kedocx U Uvjpfx Aabsnc -Weight: 1.8 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Knedpfsd Tdz Hox Aaboc -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Short taper: 5 Kedpfx Aaod Inxgebjnc -Hole circle: 105 mm -Weight: 16.2 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm Knsdpfx Asduab Isaboc -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Short taper mount for: bayonet mount Kjdpfx Aaed E R Scobonc -Cone size: 6 -Cone: Ø 106 mm -Hole circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Condition: used, Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine Kedjb A Sw Iopfx Aabenc -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 50x available -Weight: 0.9 kg

Condition: used, Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm Kodpsb A Rd Nsfx Aabjnc -Number: 1x feed available -Price: per piece -Weight: 16 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm Kedpfx Asvbbmceabenc -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg