Used Npb 40 for sale (21,711)

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dkodpfezizmzjx Akzop Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone. Dksdpfxjzizlds Akzsp

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Dkjdjzizk Hjpfx Akzsp Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Dedpfx Akjzizg Uszjkp Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum Temperature: –42°C Maximum Temperature: +180°C Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min Temperature Deviation Over Time: ± 0.1 to ± 0.5 K Temperature Uniformity Spatially: ± 0.5 to ±1.5 K Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH Temperature Deviation Over Time: ± 0.1 to ± 0.3 K Temperature Uniformity Spatially: ± 0.5 to ± 1 K Humidity Deviation Over Time: ± 1 to ± 3 % RH Halogen Lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A Refrigerant: R-404A Weight: approx. 515 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Dedpjziyygjfx Akzokp 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) Further questions can be answered by phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus Djdpfxeziyxpj Akzokp VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Dksdpfx Aoziyw Sjkzep Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Dkjdpfx Asziyb Rekzsp Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2008, lifting height: 3,920 mm, fuel type: diesel, mast type: duplex, fork length: 1,190 mm, fork width: 1,430 mm, total height: 2,800 mm, total length: 4,430 mm, total width: 2,000 mm, color: black, Empty weight: 7.500 kg Lifting capacity: 4.000 kg - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: LAN5864 - Lifting capacity: 4000kg - Lifting height: 3918mm - Overhead clearance: 2800mm Dkjdpfx Akszi Nqbezep - Fork length: 1190mm - Maximum fork width: 1430mm - Minimum fork width: 300mm - Options: Air tires, Joystick, Full cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Sistew - Driving direction: 2 Road - Transport dimensions: 4430mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Djdpfswhd Afsx Akzokp Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: used, 2 x radial tool holders VDI 40, each: 400 Euro net. Dkjdpfstz U Iijx Akzsp 2 x axial tool holder VDI 40, each: 250 Euro net.

Condition: used, axle configuration: > 3 axles, first registration: 09/2018, total length: 11,830 mm, total width: 2,550 mm, total height: 3,720 mm, suspension: air, tire size: 235/75R17,5, color: other, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Hydraulic system - Tail lift = Notes = Number of axles: 4, Tare weight: 9900 kg, Gross vehicle weight: 40000 kg, Chassis type: Full chassis, Chassis material: Steel, Suspension type: Full air, ABS, EBS, Hydraulic system, Body construction year: 2018, Body material: Steel, Ramps: Hydraulically controlled, Axle type: BPW, Tail lift, Tail lift design: Rear door, Tail lift material: Steel, WHEEL WELL / DOUBLE HYDRAULIC RAMPS / 40T TECHNICAL / GALVANIZED / MODIFIABLE = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Steered; Tire tread depth left inside: 10 mm; Tire tread depth left outside: 10 mm; Tire tread depth right inside: 11 mm; Tire tread depth right outside: 10 mm Axle 2: Twin tires; Tire tread depth left inside: 8 mm; Tire tread depth left outside: 7 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 7 mm Axle 3: Twin tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 7 mm; Tire tread depth right inside: 10 mm; Tire tread depth right outside: 10 mm Axle 4: Twin tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 6 mm Weights Unladen weight: 9,900 kg Payload: 30,100 kg GVW: 40,000 kg Functional Tail lift: Rear door Height of loading area: 89 cm Environment Emission class: Euro 0 Condition Djdpfjyqp Tmex Akzskp Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €678 per month (default, 60 months); Please inquire for more information and terms = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: Dkjdpfx Akeum Hufszsp * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: new, Year of construction: 2025, Table size: 3500 mm x 1500 mm Pump operating capacity: -0.85 bar Dkodsmftlyepfx Akzjp Reservoir tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Noise level: less than 70 dB Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 480 kg

Condition: new, Year of construction: 2025, Table size: 3000mm x 1500mm Pump working pressure: -0.85 bar Vacuum pump capacity: 40 m³/h Vacuum pump: Becker Dksdpfx Akjipv Nrezsp Noise level: less than 70db Storage tank: 100l Machine length: 3100 mm Machine width: 1650 mm Machine width (folded): 850mm Weight: 425kg

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW Dkedpfxjy Sn Hve Akzep - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,798 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 82 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,798 STILL 4.0-ton electric forklift with full cabin and heating, battery at 82%, good tires (new rear tires), telescopic mast for clear visibility, side shift, 4th valve, lighting compliant with StVZO (German Road Traffic Regulations), fork length 2,400 mm (other fork lengths available upon request), charger. Additional attachments such as fork positioners, rotating devices, etc., available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). You can find more information about us and other offers on our newly designed website! Dsdpfezivgcox Akzjkp

Condition: ready for operation (used), Knoll TG 50-20/40 480 submersible pump with AM 112M AA2 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Dkjdpezirp Hsfx Akzop

Condition: used, Year of construction: 2005, Overview Dksdszidx Hepfx Akzop This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, Air-Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependence on temperature range and humidity fluctuations: ± 2.5% RH over time, ± 3.0% RH Internal dimensions (WxHxD): 500 × 750 × 600 mm External dimensions (WxHxD): 910 × 1590 × 973 mm Microprocessor control with 10 pre-set international test standards and 20 freely programmable memory slots, Dksdpfx Ajzimfpekzjp as well as built-in timer with programmable start/stop automation and error code display. Programming via touch screen. Alarm display (audible and visual). Device protection against overtemperature: Overtemperature protection with two switching contacts Illumination of testing chamber Operating hours counter Test chamber volume: 225 liters Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A, max. current: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Buyer information for your security: The following procedures are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm Dkodpfx Akoziknzszop tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 3,860 mm, fork carriage width: 1,600 mm, fork length: 1,700 mm, empty load weight: 27,300 kg, total length: 6,050 mm, drive type: Diesel, construction width: 2,800 mm, Side loader Load center: 800 Dedpfjy U R Arsx Akzjkp Fork width: 460 mm Fork thickness: 90 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GCS180/18-17/40SFH. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment. Telescopic forks: 1700 / 2900 mm Heater, full cab, full free lift

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Dkodsziizgopfx Akzjp Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Dsdpfx Ajziixrekzekp Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2007, offer consists of: - air-suction collator VAC-60Ha - air-suction collator VAC-60Hm - horizontal conveyor ST-40 - stitcher and folder SPF-200A - side corner stitch kit SSK-200 - fore-edge trimmer FC-200A - long conveyor LC-200 Horizon VAC-60Ha / VAC-60Hm air-suction collator - technology: touch & work - model: air-suction collator - bins: 6 - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (36 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/sqm - loading height: 130mm/ bin - production speed: max. 9.500 cycles/h - power: 230V; 50/60Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: each 310kg Horizon ST-40 incl. ST-CV stacker receiving tray + horizontal conveyor - benefit: enable non-stop operation in spite of misfeed- and doublefeedcontrol - dimensions: 1.300x700x950mm - weight: 126kg Horizon SPF-200A stitcher and folder: - format adjustment: fully automatic - DIN-size and standard fold types: preassigned - saveable jobs: 200 memories for repeat orders - stitching heads: 2 - expandable up to 4 stitching heads - stapling options: topstitching, (side-, cornerstitiching optional equipment) - ring eylete stitiching: with ring eyelet stitching heads possible - inlet format: max. 508x356mm; min. 180x105mm - processing strength: max. 25 pages (80g/sqm) - clip distance: min. 73mm - stitching wire: 26 - 28 - production speed: max. 4.800 booklets/h - power: 230V / 50Hz - 0,68kW - dimensions: 1.625x810x1.070mm - weight: 500kg Horizon FC-200A fore-edge trimmer: - faulty set ejection - booklet size: max. 250x20mm min. 85mm - trimming thickness: max. 100 pages (80 g/sqm) min. 4 pages - production speed: max. 4000 booklets/h Dksdey H A T Hjpfx Akzjp - power: 230V / 50Hz - 0,55kW - dimensions: 655x810x1.070mm - weight: 245kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs