Used Oil Free Piston Compressor for sale (24,618)

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg Iedpfx Adji Eg Nvjwsal

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Iedpsw Aw Anefx Adwjal

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design Iasdpfoxc T Evsx Adwol - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pin ØBoom Pin Spacing Price: OQ65 70/70 282 430 3,000.00 € OQ70 60/60 280 330 3,000.00 € OQ80 90/90 345 510 3,500.00 € OQ80 90/90 353 515 3,500.00 € QO80 90/90 355 510 3,500.00 € OQ80 100/90 387 530 3,500.00 € Ijdpfx Adsxhdh Soweal OQ80 100/100 420 610 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 90/90 350 500 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 80/80 310 475 3,500.00 € OQ90 110/100 440 595 18,000.00 € OQ90 without bracket 15,000.00 € OQ90 110/110 470 590 18,000.00 € Verachtert Pin Ø Boom Pin Spacing CW40 80/80 310 445 2,000.00 € Lehnhoff Pin Ø Boom Pin Spacing HS21 80/80 465 333 2,000.00 € HS21 80/80 305 475 2,000.00 € Additional mounting plates available Liebherr Pin Ø Boom Pin Spacing SWA 48 65/65 253 370 2,000.00 € SWA 48 80/70 350 420 2,000.00 € SWA 48 80/80 327 460 2,000.00 €

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. Isdpfxsrivv Eo Adweal It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Ijdpfx Aexaxr Nsdweal Complete with three filter set

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, Iaodpevmbzqefx Adwel can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. If you have any questions, just call or send an email

Condition: used, Year of construction: 1994, operating hours: 34,000 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 22163 Specifications: Iajdpfjyagc Dsx Adwjl 1994 model Hours: approx. 34,000 Maximum pressure: 20 bar Ready for delivery Hours: 34000

Condition: used, machine/vehicle number: XL9T0N30004415008, axle configuration: 3 axles, first registration: 10/2004, total length: 9,560 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,690 mm, color: other, Year of construction: 2004, Axle configuration Tyre size: 385/65 Iajdpfx Aex Tr Utsdwjl Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.860 kg Carrying capacity: 34.140 kg GVW: 38.000 kg Identification Registration number: OH-84-RS

Condition: excellent (used), mileage: 6,31,155 km, power: 345 kW (469.07 HP), first registration: 02/2019, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, retarder, = Further options and accessories = - Air conditioning - Radio/CD player - Sleeper cab - Automatic heating system Iasdjx S Nlmopfx Adwol - Power take-off (PTO) = Remarks = TRANSPORT TO ANTWERP 390 EUROS = Further information = Tyre size: 315/70 R22.5 Brakes: Disc brakes Front axle: Steered; Suspension: Parabolic spring Rear axle: Twin-mounted; Suspension: Air suspension Unladen weight: 7,284 kg APK (technical inspection): valid until 03.2026 Technical condition: very good Visual condition: very good Reference number: 2

Condition: excellent (used), mileage: 7,35,625 km, power: 324 kW (440.52 HP), first registration: 09/2016, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,280 mm, total width: 2,550 mm, total height: 3,910 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Equipment = - Alarm system - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Leaf suspension - Car kit - Roof hatch - Roof spoiler - Differential lock - Digital tachograph - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - Radio/CD player - Sleeper cab - Side door - Sun visor - Lane departure warning system - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Power take-off (PTO) Iajdjxfh Rxopfx Adwel = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R 22.5; Max. axle load: 7,500 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf suspension Rear axle: Tire size: 315/70 R 22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inside: 30%; Tire tread left outside: 30%; Tire tread right inside: 30%; Tire tread right outside: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,737 kg Payload: 12,763 kg gross vehicle weight (GVW): 20,500 kg Functional Body manufacturer: ZF Condition Technical condition: very good Visual condition: very good

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. Iedpfx Aofz Ndysdweal First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Iaodpofz A H Dofx Adwol - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Iaodpfx Adeflrc Sewsl - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, functionality: fully functional, fuel type: diesel, Year of construction: 2025, Equipment: new trailer mounted 190cfm diesel engine rotary twin screw air compressor Make/model: MCWEL MC190S-I Free Ris Delivery : 190cfm Working Pressure :100psi Iaodpfx Adjx Izktowjl Engine make/model: Isuzu 4JB1ZY-01 Rate output: 50kW , 2500rpm

Condition: excellent (used), Year of construction: 1997, For sale: robust, industrial piston compressor from the renowned German brand Josef Mehrer, model A3V. • Year of manufacture: 1997 • Motor: EMI Belgium 4.0 kW / 400 V • Piston system: 2 cylinders in V configuration • Final pressure: up to 10 bar • Solid cast iron construction • Oil lubrication with sight glass • Three-phase connection – ready for operation Visual and technical condition is very good. The machine is fully functional and ready for further use. Ideal for workshop, industrial or production applications. Classic European build quality – still made of steel, not plastic. Iaedpfx Ajud Shqjdwjl

Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Max pressure: 13 bar Power: 75 kW – 100 HP Output per min: approx. 12,500 l Iajdpfxoxvcdno Adwel

Condition: used, mileage: 2,85,184 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 8,302 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/55 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, navigation system, onboard computer, parking heater, spoiler, truck registration, | Mercedes Benz Actros Giga 1851 | Leaf/Air Suspension | Retarder | Automatic Transmission, Euro 6 | Heated Seat, Multifunction Steering Wheel | Air Conditioning, Cruise Control, Lane Keeping Assist, Adaptive Cruise Control | Emergency Braking Assistant | Differential Lock | Auxiliary Heater, Sunroof | Electric Windows, Electric Mirrors | Navigation System | Valid Inspection Certificate until | Subject to errors, input mistakes, and prior sale. Iodpox Tz Szjfx Adwoal

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. Iodex Ah A Aspfx Adwoal (We only respond to enquiries with your address and telephone number!)

Condition: ready for operation (used), Year of construction: 1984, Diameter: 700mm Iodpfx Adox Tptaswsal Spindle hole: 250mm Turning length: 3000mm

Condition: used, Year of construction: 2010, operating hours: 10,000 h, Field of application: Construction Isdpfxeyagb Hs Adwsal Serial number: CAI46xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22165 Specifications: 2010 model Hours: approx. 10,000 Weight: 452 kg Maximum pressure: 10 bar Fully functional Ready for delivery Hours: 10000 Own weight: 452

Year of construction: 2001, condition: used, Conveyor belts for PETCYCLE crates, consisting of motorised conveyor belts and gravity roller conveyors. Length approx. 70 m Additional title: Crate transport routes Capacity: 4000 crates/h Formats: Petcycle box for 20 x 0.5 l, 9 x 1.0 l, 6 x 1.0 l and 6 x 1.5 l PET bottles Operation / Control: Control panel / Siemens S7-300 Material: Mainly stainless steel Isdpfx Aox T Azdodwjal Position: Free-standing Features: Hinge belt conveyors, roller conveyors, conveyor frames, drives, substructure, drip tray, control system

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: Iodeq Nyzbepfx Adwsal 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: excellent (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Machine for dosing bulk materials very precisely with low air amount. Consists :bunker with 3 screws, SEW drives with fan cooling, rotational valve with knive, air compressor 11kw motor Pedro Gil S.L Total weight of dosing unit- approx 6,6tons. Compressor has silencer chamber with additional cooling fan. Iasdpfx Aex Dza Rodwjl Included 1 pc. 90 degree bend on material and air outlet.

Condition: used, Compressor Manufacturer: Atlas Copco Iaodpjyaak Iofx Adwel Model: GX7 Hours used: 580 h