Used Oil Water Separation Systems for sale (48,851)

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Fgedeqmmcgspfx Aabeh Price on request.

Condition: new, Size: 1250*1250*1550 mm Weight: 600 kg Fgjdpjw Ac D Dsfx Aabjh Power: 1.5 kW Capacity: about 500–1000 kg/h Bottom discharge type

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Fgsdpfx Aajv Ta D Dsbsh Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: new, Year of construction: 2025, functionality: fully functional, Water gravity table Our tables are manufactured based on the world's best solutions. They have high efficiency of gravity separation based on different densities of materials. A notable feature is the ramp and plateau system built into the table top, ensuring excellent separation of materials of different densities and waste. The table design minimizes turbulence. Fsdpfxjt Ukz Eo Aabegh Low turbulence means higher efficiency even when recovering fine grains of metal. Feel free to contact us.

Year of construction: 2013, condition: excellent (used), 4.piece in stock Water cooled switch cabinet cooler Fabr.PFANNENBERG Type:PWS 7412 Bj.2013. Fgodpfxoiicp Eo Aaboh Price is for 1 piece.

Condition: used, functionality: fully functional, machine/vehicle number: 001441, Filter Water-Oil Kit Fgsdpfewb Sc Hex Aabeh

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Fodpfoqmmkkox Aabjgh scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2018, condition: new, condensate treatment: new Kaeser oil/water separator CF 38 Technical data: Max. delivery volume of oil-cooled screw compressors and oil grade in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for oil grades S-460, MOL, MOH, PAO,VCL 29.3 m³/min for the oil grade VDL Fgedpjdmqy Iefx Aabsh Tank size (volume): 115,5 l Filling volume: 84,3 l Connection condensate inlet: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Connection oil drain: DN 40 oil catch tank: 2 x 10 l Mass: 36,5 kg Dimension W x D x H: 530 x 764 x 1090

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Fgedpfx Aoqmmffoabjh

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Fedjqmmalepfx Aabegh Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Fodeqmmvropfx Aabogh Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, machine/vehicle number: H110014501, Water chillers You are welcome to visit us by appointment. Fsdpfxjwl Iw Io Aabegh

Condition: used, Empty weight: 20 kg Part suitable for: trucks Type number: 04906170 Occ oliefilterhuis met waterpomp D7E Volvo OEM : 04906170 Fjdjxh Uxnopfx Aabegh Article nr.: L210011002-veiling Used oil filter housing with water pump D7E Volvo

Condition: used, Year of construction: 1951, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Manufacturer & Type: Manufacturer: Vitkovice a.s., Ostrava Boiler Type: Water-tube vacuum steam boiler Classification: Gas-fired Fuel System: Primary Fuels: High-Processing Gas (VPP) Coking Gas (KP) Natural Gas (ZP) Ignition Fuels: Coke oven gas Natural gas Performance Parameters: Nominal Steam Output: 80 t/h Minimum Stable Output: 48 t/h Operating Range: 60-100% of nominal capacity Steam Conditions: Fodpfowwtxuox Aabsgh Outlet Temperature: 525°C Outlet Pressure: 9.6 MPa Feedwater Temperature: 150°C Combustion System: Number of Burners: 6 Key Features: Vacuum-type water-tube design Multi-fuel capability Wide operating range (60-100%)

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, pressure: 6 bar, nominal heat output: 1,400 kW (1,903.47 HP), temperature: 105 °C, tank capacity: 2,040 l, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, Viessmann VITOPLEX SX1 1400kw hot water boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of construction: 2006 Nominal heat output: 1400 kW Fsdpfx Aoudllvjabogh Boiler water content: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gas type: natural gas Gas control valve: DUNGS DMV-D 5065/11 Pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leakage tester Dungs VPS-504 S04 with stuffing box Leak tester Dungs VPS-504 S04 Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: excellent (used), Year of construction: 2007, operating pressure: 6 bar, temperature: 110 °C, tank capacity: 4,210 l, We offer for sale LOOS water boiler with Weishaupt burner Boiler parameters: - Maximum operating pressure: 6 bar - Maximum test pressure: 9.6 bar - Maximum temperature: 110 degrees - Power: 3,500 kW - Capacity: 4210 l - Year of construction 2007 Fodpjr Hyntjfx Aabegh Parameters of Weishaupt Burner RGL 50/2-A Power: 4,500 KW Year of Manufacture: 2007 In addition, control cabinet Very good condition

Condition: good (used), Year of construction: 2014, Oertli PK356 Hot water boiler Serial: 3467810 Fsdpsqqhg Tofx Aabsgh 2014, Hot water, max op temperature 100'C, 7.5M/3 exchange area, 100-200Watts, Burner type OES352GL, comes with Charot Pxprima 15D control and two Grundfoss pumps and valves,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve Fedpfxjw Ewafe Aabsgh - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: good (used), Year of construction: 2008, INSMAN FIELD CVA-IF-3 Steam Boiler water-tube type Maximun continuous production 3000 Kg/h Power 2132 Kw / 1,825,000 kCal/h Maximum operating pressure: 29 bar Test pressure 37.7 bar Fsdpfxswryazj Aabjgh Heating surface 133.56 m2 Total volume 4,381 m3 Max. temperature service 232.8 ºC DUNPHY Brand modulating type burner. Model TG 37 ZM LC PV. Natural gas power 500-2200 Kw Available documentation

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste Fjdpfstywzqsx Aabegh The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: ready for operation (used), Our flagship product. The D250P Depositor is used for a wide range of products and applications across many industries.   Key Machine Capabilities Fodpfx Aajw Hnt Ssbegh Deposit range 19ml to 1363ml Maximum speed at full stroke - 68 cycles/min Maximum speed at min stroke - 250 cycles/min Additional Features Ergonomically placed controls at the front and rear of the machine Cleaning and changeover procedures require no tools Interlocked hopper and rotary valve safety circuit Machined Piston seals fit the cylinder bore for extremely accurate deposits Weight control indicator detailing the percentage of stroke Large bore Rotary Valve block to enable the processing of large particulate Moveable and height-adjustable stand with 350mm flexibility A wide range of accessories is available to suit a multitude of applications

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Fsdpfsxl Tnpjx Aabegh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min Fedpexgumcjfx Aabogh - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: ready for operation (used), All stainless steel construction with valve rejection system. Fjdewvmh Hopfx Aabegh

Condition: ready for operation (used), Machine can spray oil or slurry on products to aid seasoning. Mesh conveyor belt is not included but we can also supply a new one. The system has eight spraying heads four on the top snd four at the bottom to fully cover the product in oil. Fgedpfx Aou Rgnnjabsh