Used Oil Water Separation Systems for sale (49,057)

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning Csdeivdvcopfx Aizjri + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L100): + €389.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hour - Peak cooling capacity*: 180 liters / hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA Crodpoyn Rkujfx Aizsi * 2800 L/min

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Crodpfozz Achsx Aizji Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Year of construction: 2017, condition: ready for operation (used), A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible. Crodpezcp Uhsfx Aizei

Condition: used, functionality: fully functional, operating hours: 33,105 h, Year of construction: 2015, laser hours: 6,024 h, laser power: 15,000 W, We offer a used PHENIX SYSTEMS Prox 300 (DMP) system, manufactured in 2015. Manufacturer: PHENIX SYSTEMS Model: Prox300, Type: 5006073Z00 DMLS Technology: Direct Metal Laser Sintering. Credpfx Aj Ahzbpeizji Materials: Metal, Ceramic (used on Inconel). Year of Manufacture: 2015 Serial Number: 1584305 Type: 5006073Z00 Power: 15 kW Voltage: 400 / 480 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Veolia Water System, Model - Orion 2000 Crjdpfxez Ic T Re Aizji Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want.

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid swelling during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing is possible using a water mixing and dosing device + water-carrying parts are made of stainless steel and require no cleaning + hygienically flawless, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel cooling evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing devices with only 2 inlets (cold / warm) Credpfoivdvkox Aizsi + €349.00 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling capacity*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Type: ProX 350 Crodpfxj Ahyw Te Aizji Manufacturer: 3D Systems Year of manufacture: 2015 DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Rated short-circuit current: 6 kA Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Condition: good, second-hand Crodpfx Aiszqc E Uszji

Condition: good (used), Emulsion separation system, oil-water separation system (for removing oil from condensate in compressors) The most cost-effective and permanently reliable solution to this problem is usually the separation of oil and water from dispersed condensate. The treated water meets the legal requirements for discharge into the sewer system. Csdpfx Aiogvu Tgszjri

Year of construction: 1992, condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm Crsdpfxob Swr Ns Aizei KW: 2.7

Year of construction: 2026, condition: new, Metal separation system – WPS-1000 + 12,000 gauss magnetic separator Metal separation system consisting of a vibrating table, a magnetic drum belt separator, and a WPS-1000 eddy current separator. Designed for the separation of ferrous and non-ferrous metals from bulk materials in recycling processes. OPERATING PRINCIPLE The vibrating table feeds and distributes the material evenly. The magnetic separator captures magnetically susceptible particles. The WPS-1000 eddy current separator then separates non-ferrous metals, such as aluminum and copper, from the remaining material stream. VIBRATING TABLE AND MAGNETIC DRUM BELT SEPARATOR • Vibrating table width: approx. 1,000 mm • Vibrating motor power: 2 × approx. 0.8 kW • Magnetic drum width: approx. 1,100 mm • Magnetic roller diameter: approx. 200 mm • Magnetic flux density: approx. 12,000 gauss • Conveyor belt motor power: approx. 1.1 kW • Reinforced PVC conveyor belt • Structure partially made of stainless steel WPS-1000 EDDY CURRENT SEPARATOR • Magnetic rotor with NdFeB neodymium magnets • Magnetic rotor length: 1,000 mm • Rotor motor power: 7.5 kW • Conveyor belt motor power: 1.5 kW • Variable rotor and conveyor belt speeds Credpo Afw Uksfx Aizoi • PVC conveyor belt with a sealing side skirt • Enclosed separator structure • Adjustable splitter for separating material fractions • IP55-rated control cabinet with a safety system • Color: RAL 3001 Adjustable rotor speed, conveyor belt speed, and splitter position allow operating settings to be adapted to the processed material. Separation performance depends on material composition, particle size, and feeding conditions.

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Crodpfx Aioipadxezsi Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Crodpov S Ep Ajfx Aizei Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Year of construction: 2022, operating hours: 7,200 h, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, Component A and Component B The dispensing head has been expanded with a Y-shaped slider. - Manual adjustment mechanism for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for Comp. A + B - Material pressure tank 50 l for Comp. A - Level monitoring for Component A + B - Material recirculation to the dispensing pump for Comp. A and B - Material evacuation for Comp. A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Workbench approx. 1,400 mm x 500 mm with table top Csdj Ahp A Rjpfx Aizsri - Transfer station for lid drum, Component A - Transfer station for bung drum, Component B - Dispensing control system (Siemens PLC control based on S7-300) - Precision piston dispensing pump for Comp. A and B - EKDP A, Component, 257 ccm - EKDP B, Component, 64 ccm --> 1 x spare EKDP A and EKDP B are included. These have been reconditioned by Rampf as an exchange part. (see image)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Codpfx Aerivv Esizsri Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, This listing is for the Agilent PCB1500 Water Peltier System. The unit is in full working condition and ready for immediate use. Designed for precise thermal regulation, it provides stable and efficient temperature control for sensitive lab processes. Ideal for integration with analytical instruments requiring consistent cooling performance Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Crodpfx Aijyz Aquozei • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Cjdpfx Ajyizqnoizjri Dismantling must be carried out by the buyer

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled chiller unit Cooling capacity: 7.9 kW at supply and return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with a coaxial evaporator for efficient heat transfer Internal P3 pump for reliable circulation of the cooling water Storage tank with a 50-liter water volume for short-term buffering of load fluctuations Variable-speed fans for demand-based cooling and reduced energy consumption Control: compatible with common control systems, ideal for easy integration Cedpfjfy Ryksx Aizsri Suitable for smaller cooling applications, e.g., the plastics industry.

Condition: ready for operation (used), Year of construction: 2021, A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available. Cedpfxjt Nhmno Aizsri

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Specialist Company in accordance with the German Water Resources Act Dear Sir or Madam, We offer a 30,000-liter double-walled storage tank for diesel storage, complete with a new diesel dispensing pump including data recording. Nominal capacity: 30 cubic meters Quantity: 1 Used, but fully overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL paint; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 fill pipe Quantity: 1 new level sensor Quantity: 1 new leak detection device with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,000 kg Storage: Above ground Of course, you can also customize your tank system! Cjdpfx Ajc Nktbjizjri All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. You can inspect our systems at any time. We have other tank systems for above-ground and underground storage in all sizes, which are available for sale on our premises. All our tank systems can also be offered without a diesel pump. Currently on offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank / fire water tank also on offer. Price / Shipping The price for the tank system applies ex works Warstein, unloaded. Delivery can be offered at a reasonable cost for an additional charge. Delivery time: Immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an authorized specialist company in accordance with the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Year of construction: 2025, Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml); bottle volume: 350-1500ml; PET bottles; standard 28/30mm PET caps; 1500 liter of water filling /hour; 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of machines/modules. Csdev Nla Aopfx Aizeri Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute; number of rinsing heads: 18, number of filling heads: 12, 6 capping heads; bottle volume: 350-2000ml; bottle diameter: 50-90mm; bottle height: 150-310mm; filling tolerance: +/- 2%; compressed air: 0.5m³/6bar; filling water: 1.5m³/h; rinsing water: 0.5m³/h; power: 380V, 3.5kW; machine dimensions: L2700xW1600xH2800mm; weight: 2.500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Cedsv Nlacjpfx Aizsri

Condition: new, Year of construction: 2025, Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m³/6bar, filling water: 9m³/h, rinsing water: 3m³/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Csdpov Nlaijfx Aizjri Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2020, condition: used, functionality: fully functional, Flow rack with picking aid Rack information: - 131 product compartments + 4 return compartments: - 5 units from left to right (1st unit: 26 compartments / 1 return. 2nd unit: 28 compartments. 3rd unit: 26 compartments / 1 return. 4th unit: 26 compartments / 1 return. 5th unit: 25 compartments / 1 return (originally 26 compartments / 1 return)) - 5th unit - 25 compartments, accessible with Strödter lifting aid - The supermarket can also be modularly assembled in other widths and with different compartment layouts. - At the beginning of 2025, 4 compartments were converted to reinforced rollers and an extended insertion area. - Manufacturer: AQS Logistic Systems GmbH; Siemensstraße 5; 57290 Neunkirchen - Year of manufacture: 2020 - Dimensions: Depth: 12m / Width: 5 units, each 7.5m --> Total width: 38m - Shelves: Dimensions: 800x400x20 L/W/H, 294 pieces, new and original packaging available. - Spare parts available - Attention! Rollers are partially defective. Lifting aid information: - The picking aid from Strödter Handling Technology GmbH was manufactured in 2023. Its gripper can be pivoted from top to bottom (90°C) and was designed for removing toilet bowls from the rack. The toilet bowls were removed from the flow rack using the lifting aid, tilted by 90°, and placed on a tray on a pallet. - Thanks to a new gripper, the lifting aid can also be used for any products. The maximum load capacity is 45 kg. Codpfszz Ruxsx Aizsri Additional information: The flow rack and the lifting aid can also be purchased separately.